Configuring Different Services to Use Different Multicast Addresses Within a Process

[bkcarlos]

Q:Is it possible to configure different services to go to different multicast addresses within a process, I added configuration to service but it doesn't work!

[bkcarlos]

           "service": "0x3",
           "instance": "0x1",
           "unreliable": "56002",
           "multicast" :
           {
               "address": "239.0.0.10",
               "port": "30491"
           },
           "someip-tp": {
               "service-to-client": [
                   "0x7531"
               ]
           },
           "events": [
               { "event": "0x83f4", "is_field": true},
           ],
           "eventgroups": [
               { "events": ["0x83f4"], "eventgroups": "0x200"},
       
           ]
       },

[bkcarlos]

"service-discovery": {
"enable": "true",
"multicast": "239.0.0.1",
"port": "30490",
"protocol": "udp",
"initial_delay_min": "10",
"initial_delay_max": "30",
"repetitions_base_delay": "200",
"repetitions_max": "4",
"ttl": "5",
"cyclic_offer_delay": "2000",
"request_response_delay": "10"
}

[bkcarlos]

239.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 pfe0
239.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 pfe0.4

[bkcarlos]

not find 30491 in lsof result
lsof -i | grep 3049
applicati 27907 root 251u IPv4 995298 0t0 UDP 224.1.1.11:30490
applicati 27907 root 568u IPv4 992523 0t0 UDP 172.16.4.23:30490
applicati 27907 root 569u IPv4 991002 0t0 UDP *:30490