Merge branch 'main' of https://github.com/Cine-Fox/cine-fox.github.io

docs/cfehat.md

@@ -27,9 +27,10 @@ This is probably the most important issue for you. Will Whang may occasionally c
 
 ![i2c](/cfe_i2c_connect.jpg)
 
+> *Here my FPC cable is connected in reverse, but in order to show the i2c connection, I temporarily blur on the ribbon FPC cable. 👆*
 
-> [!TIP]
-> Then Cine Fox will help you auto mount it to `/media/RAW`, and you can unmount it on WebUI.
+3. Then Cine Fox will help you auto mount it to `/media/RAW`, and you can unmount it on WebUI.
+4. Done!
 
 ## About FPC Cables
 
@@ -39,4 +40,4 @@ You can get more detail from Will's [Blog](https://www.willwhang.dev/Solar-eclip
 
 ## Wiki
 
-[Here](https://github.com/will127534/RPI5-CFE-Hat/wiki) is the wiki made by Will
+[Here](https://github.com/will127534/RPI5-CFE-Hat/wiki) is the wiki made by Will

docs/external_ssd.md

@@ -12,6 +12,8 @@ External SSD is also a common storage way, like Samsung T5, T7. It can be easily
 
 Therefore, if it is not used for high FPS and high-quality shooting, then External SSD can meet the requirements. Otherwise, [RPI5-CFE-Hat](/cfehat) is still recommended.
 
+I used to use this way, but I stopped using it after I switched [Raspberry Pi High Quality Camera](/hq_camera) to [StarlightEyes](/starlighteye).
+
 ## Usage
 
 1. Flash image, you can do [this step](/software.html#install-cine-fox) first.
@@ -25,4 +27,4 @@ sudo udevadm trigger
 sudo reboot
 ```
 
-Now it can auto mount your SSD now.
+Now it can auto mount your SSD now.