Buddyflight

This allows the OSD display location of another FPV pilot running the same configuration to make them easier to find for shared flights.

The OSD will show the following on the display

• direction to the other pilot
• distance
• relative altitude

Installing and configuring - ardupilot

• OSD must be installed using custom install instructions with ADSBAWARE and ADSBSEND enabled in config.h
• ADSB must be configured, and enabled for forwarded to the OSD serial port. See Ardupilot instructions for configuring ADSB
• OSD RX must be connected to the FC TX.
• OSD TX must be connected to RX of serial modem.
• TIP: ADSB setting best viewed in Tree view

---

Note This functionality is currently for Ardupilot users only.

See also ADSBSTATION and BUDDYFLIGHT.