Buddyflight

This allows the OSD display location of another FPV pilot running the same configuration to make them easier to find for shared flights.

The OSD will show the following on the display

• direction to the other pilot
• distance
• relative altitude

---

Installing and configuring - MWOSD

• OSD must be installed using custom install instructions with options below configured in config.h
• Enable ADSBAWARE and ASDBSEND in config.h
• Select ADSB limit, distance and altitude settings you require in config.h
• OSD TX must be connected to the Serial modem RX linking to other aircraft.

---

Installing and configuring - ardupilot

• OSD RX must be connected to the FC TX.
• OSD TX connected to RX of serial modem.
• TIP: ADSB setting best viewed in Tree view
• ADSB_ENABLE = 1
• ADSB_LIST_MAX = 5
• ADSB_LIST_RADIUS = 10000 or 100000 for testing. 10km or 100km radius
• SRX_ADSB = 5 on serial port X which is port OSD is connected to

---

Connections

• OSD RX must be connected to the FC TX.
• OSD TX connected to RX of serial modem.

---

Note This functionality is currently for Ardupilot users only.

See also ADSBSTATION and BUDDYFLIGHT.