Skip to content

Latest commit

 

History

History
621 lines (537 loc) · 24.4 KB

CHANGES.md

File metadata and controls

621 lines (537 loc) · 24.4 KB
Raw

v2.1.6

  • Introduce mac_address parameter to manually configure the RCP's EUI-64.
  • Accept chan_plan_id = 160 for Chinese PHY.
  • Fix Segmentation Fault on 6LoWPAN fragmentation failure.
  • Fix memory leak when using neighbor_proxy.
  • Fix multicast forwarding under heavy load: MPL buffers used to be kept in the network for an unnecessarily long time, causing confusion with packet chronology.

v2.1.5

  • Improve D-Bus RoutingGraph:
    • FFNs neighbors that are not registered through RPL are no longer exposed. They would be previously misinterpreted as LFNs during initial connection or after expiration.
    • Update signals are no longer emitted for renewed parent registrations that do not include any parent change.
  • Support LFN aggregation in RPL DAO packets (consecutive target options for one common transit option).
  • Fix use-after-free for multicast packets using MPL.
  • Prevent segfault when using an external RADIUS server.
  • Fix PMK/PTK configuration for LFNs, the FFN value would be used previously.
  • Print backtrace on Segmentation Fault and other crash signals.
  • Fix CPC error code logs.

v2.1.4

  • Fix interoperability issue with mode switch: do not include the base PhyModeId in advertised POM-IEs.
  • Terminate with a fatal error when a CRC error is detected on the bus: missing HIF frames causes complex errors which are usually not recoverable.
  • Use UTC timestamps in pcap_file instead of local timebase.

v2.1.3

  • Fix neighbor_proxy: routing has been broken for nodes more than 1 hop away since v1.7 when using that feature.
  • Improve recovery when a previous neighbor is detected to have moved futher away from the border router. Previously, wsbrd would keep trying to communicate directly with the node until expiration of its address registration. Now the neighbor entry is removed when a DAO indicates that the border router is no longer a parent.
  • Fix interoperability issue when operating in fixed channel: do not advertise any excluded channels.

v2.1.2

  • Set the IPv6 hop limit to a fixed value when creating a tunnel, instead of copying the received hop limit. Intermediate Wi-SUN hops are now invisible to tools like traceroute, as it should be for any kind of IP tunnel.
  • Include received acknowledgement frames in pcap_file.
  • Change behavior of TBU endpoints /config/borderRouter/joinMetrics and /config/borderRouter/informationElements: previous IEs/metrics are now always removed when a new request is received.

v2.1.1

  • Fix high CPU usage during intense traffic: packet queues being full caused a busy wait in the main loop.
  • Fix wshwping:
    • Fix incorrect frame format for parsing RCPv2 ping confirmations.
    • Flush transmission queues on process interruption (^C no longer causes a freeze at the next program start).
    • Fix invalid and/or missing HIF traces for RCPv2.
  • Fix JM-IE inclusion for TBU:
    • Correctly update the content version number.
    • Include the JM-IE in data frames for when PA transmissions are disabled by the trickle algorithm.
    • Insert JM-IE with no metrics instead of it being absent, otherwise neighbors do not observe a new content version.

v2.1

  • Support separate PTK/PMK lifetimes between FFN and LFN.
  • Remove some authentication limits: more supplicants accepted simultaneously, resuling in better authentication delays.
  • Support MPL seed-id omission when operating fully in FAN 1.1 (16 bytes saved per multicast packet).
  • MAC mode switch support for TX: D-Bus method SetModeSwitch has been superseded by SetLinkModeSwitch.
  • Support TBU endpoints /command/borderRouter/rpl/incrementDodagVersion and /command/borderRouter/rpl/incrementDtsn.
  • Support experimental EDFE initial frame generation for TBU.
  • Support TBU runtime key insertion in /config/borderRouter/gtks.
  • Support runtime MAC filtering via D-Bus methods AllowMac64 and DenyMac64, and also TBU endpoint /config/whitelist.
  • Fix potential crash at boot on unexpected RCP indication due to race condition between RCP reset and reception of a frame on the radio.
  • Fix TBU error handling in /config/borderRouter/gtks.
  • Fix pcap_file and TBU /subscription/frames (RX-only decrypted packet capture).

v2.0

  • Drop support for legacy RCP API (< 2.0):
    • Neighbor count no longer limited by the RCP memory.
    • Drop parent and ipv6 from the D-Bus Ǹodes property, developers are now responsible for querying the DHCP server in order to map between EUI-64 and IPv6 addresses.
    • wsbrd_cli reports the RPL graph using IPv6 addresses (instead of EUI-64).
  • Implement Adaptive Power Control (APC) for the Indian regulation (WPC).
  • Prevent LFN desynchronization due to drift over-correction.
  • Fix use-after-free in neighbor handling.
  • Fix some build warnings.
  • --capture is now part of the main wsbrd executable (no need to compile wsbrd-fuzz).

v1.9

  • Support RCP API version 2.0 (released with GSDK 4.4.1):
    • Multi-rate parameter for transmissions retries.
    • Reduced number of states: timing information and expected frame counters are now part of data requests.
    • Automatic detection of RCP API version at boot.
  • Improve reboot behavior:
    • Save and restore RPL routes.
    • Save and restore IPv6 neighbor cache.
    • Introduce D-Bus property RoutingGraph and deprecate ipv6 and parent fields in Nodes.
    • Introduce D-Bus methods to increase RPL counters.
  • Stop forwarding locally scoped multicast packets to LFNs (ff01::/16 and ff02::/16).
  • Remove 500 bytes limit to enable mode switch.
  • Improve TBU frame subscription.
  • Internal cleanup.

v1.8.2

  • Fix crash on full neighbor table.
  • Fix crash on external RADIUS server unreachable.
  • Fix crash on external RADIUS invalid configuration.
  • Fix replay with wsbrd-fuzz.

v1.8.1

  • Improve RPL interoperability (accept rank 0)
  • Fix TBU ping for non neighbor nodes
  • Fix TBU PTK lifetime configuration
  • Fix TBU runtime key insertion
  • Support external RADIUS server in wsbrd-fuzz

v1.8

  • Allow neighbor Limited Function Nodes (LFNs) to subscribe to IPv6 multicast groups.
  • Support O-QPSK PHY configurations using PhyModeIds defined by Silicon Labs (check --list-rf-configs).
  • Update PHY parameters with new standard ChanPlanId definitions.
  • Update FAN 1.0 Indian PHY definitions (mode = 1a, class = 1 and mode = 2a, class = 2). The Wi-SUN PHY specification has undergone a breaking change in version 1vA10. Users of the legacy PHY settings are now expected to use chan0_freq, chan_spacing and chan_count. Make sure to verify that the RCP firmware contains the desired PHY configuration (using --list-rf-configs).
  • Refresh neighbor IPv6 address registrations on MAC acknowledgements.
  • Support LFN schedule adjusting using LTO-IE for energy optimization.
  • Update Test Bed Unit (TBU) with FAN 1.1 features.
  • Internal cleanup.

v1.7.2

  • Fix PAN version advertisement.
  • Prevent multicast loopback for RPL DIO packets.
  • Deprecate SetSlotAlgorithm D-Bus method.

v1.7.1

  • Fix LFN Time Sync encryption
  • Improve LFN stability
  • Improve key distribution
  • Improve MbedTLS compatibility
  • Fix TBU API /config/preferredParent

v1.7

  • Updated nodes join ability API (enable_lfn and enable_ffn10 replace fan_version). FAN 1.0 routers are no longer accepted by default since they conflict with LFN support.
  • Fix custom channel mask advertisement (note that Silicon Labs embedded Wi-SUN stack older than v1.7.1 becomes incompatible when using that feature).
  • Drop support for wsnode, wshwsim and wssimserver, remove some unused stack features outside of the scope of a Wi-SUN border router.
  • New simpler RPL root implementation.
  • Test Bed Unit (TBU) API implementation for the Wi-SUN certification.
  • Disable EDFE when regional regulation ARIB is enabled.
  • Fix --list-rf-configs for custom PHYs.
  • Fix wsbrd_cli compilation using any Rust version >= 1.38

v1.6.4

  • Fix MAC address filtering.
  • Fix join metrics IE.
  • Fix wsbrd-fwup edge cases.
  • Fix wsbrd-fuzz capture from TUN.

v1.6.3

  • Fix wsbrd-fwup sx verification.
  • Documentation complements on LFN D-Bus limitation and IPv6 fragmentation.

v1.6.2

  • Revert DBus parameter name declaration to allow for systemd versions older than v246.

v1.6.1

  • Fix memory leak.
  • DBus interface now declare parameter names.
  • DBus interface now implement InstallGtk and InstallLgtk.
  • Allow disabling automatic key installation. This feature is used in conjunction with InstallGtk and InstallLgtk for the certification process.
  • Cosmetic changes in README.

v1.6

  • Allow Limited Function Nodes (LFNs) to connect directly to the Border Router. Support for LFN needs FAN1.1 to be enabled (as in release 1.5).
  • The configuration file now accept "lfn_broadcast_interval" and "lfn_broadcast_sync_period" parameters.
  • Allow dropping root privileges after startup (see "user" and "group" parameters).
  • The new phy_operating_modes parameter allow enabling "PHY mode switch" and specifying the list of PHY mode IDs to use. Note that previously "PHY mode switch" was enabled opportunistically. To get this behavior, specify "phy_operating_modes=auto".
  • phy_operating_modes also allows using "PHY mode switch" with custom regulation domains.
  • Don't enable "PHY mode switch" if FAN version is FAN1.0.
  • Value of the POM-IE and the hardware RF configuration index are now displayed on startup.
  • "--list-rf-configs" now displays what configurations can be associated in a group for phy_mode_switch
  • DBus interface now reports:
    • if the node is authenticated (is_authenticated)
    • if the node is heard by the border router (is_neighbor)
    • the RSSI, if the node is a neighbor (rssi)
    • the RSL measured, if the node is a neighbor (rsl)
    • the RSL advertised by the node, if it is a neighbor (rsl_adv)
    • the node roles (node_role)
    • LGTKs and LGAKs
    • FAN version
  • DBus API RevokeNode has been renamed in RevokePairwiseKeys.
  • DBus API RevokeApply has been renamed in RevokeGroupKeys.
  • wsbrd_cli now reports LGTKs, LGAKs, phy_mode_id, channel_plan_id and FAN version.
  • wsbrd_cli now compiles with Rust 2015 (2018 was required before this change).
  • New tool "hwping" allows testing a link with the RCP.
  • New tool "fwup" allows upgrading the RCP.
  • Introduce "traces = drop" to traces the reasons the packets are dropped by wsbrd. This option may be used to check if remote nodes send malformed data. The frames dropped by the RCP are not reported by this interface.
  • All the OFDM MCS (0 to 7) are now accepted in the configuration file.
  • The default tx_power value was too high for most of the devices. The default value (14 dBm) is saner.
  • Allow removing the cached data on start with --delete-storage. The previous method was to assign "-" to "storage_prefix". It is not longer supported.
  • JM-IE is now reported.
  • Properly report a fatal error if the network name (or any other string parameter) is too long.
  • Fix case where the node requests a new GTK. A full 4-way-handshake was triggered while 2-way-handshake was sufficient.
  • Fix IPv6 encapsulation when destination is ff03::fc (= all MPL forwarders)
  • Fix display of HIF traces for packet < 9 bytes.
  • Chan plan 1 was automatically used when the user specified a channel mask.
  • Warn the user if the chosen PHY is not specified in the chosen regulation domain.
  • Since the frame with FSK+FEC modulation can be longer than the constraints defined by ARIB, FEC modulations are no longer accepted when ARIB is enabled.
  • Clean up output of cmake.
  • Relocate side tools to a subdirectory to make them less visible
  • Mention the tools in README

v1.5.5

  • Backport the fix for memory leak introduced in 1.6.1.

v1.5.4

  • LFN Broadcast (LBC-IE) was not properly filled.
  • Fix fatal error with rtnl_route_add() when neighbor_proxy was in use.
  • Fix nodes revocation.

v1.5.3

  • PTK and PMK were not properly restored when wsbrd restarted.
  • No longer accept invalid 6LoWPAN fragment packets.
  • No longer accept unencrypted data and PAN-config frames.

v1.5.2

  • Fix handling of channel mask on big endian architectures. Globally all the bits arrays has been rewritten to be agnostic with the CPU endianess.

v1.5.1

  • PAN-Configuration frames now include LFN Broadcast Interval and LFN Broadcast Sync Period. The user can customize these values in the configuration file.

v1.5

  • Introduce phy_mode_id and chan_plan_id to select a PHY FAN1.1. Also add the DBus properties WisunPhyModeId and WisunChanPlanId.
  • We can now advertise FAN1.1 PAN (in the field "FAN TPS Version"). FAN1.1 is automatically select if the user uses chan_plan_id. The fan version can still be enforced with the fan_version parameter.
  • The advertised FAN version is independent of the chosen PHY. It is possible to advertise FAN1.1 protocol with PHY FAN1.0 and vice-versa.
  • Add support for LGTKs (for LFN authentication). The existing API for GTK (values, timings, etc...) is also available for LGTKs.
  • Change DBus API to enable "mode switch". It is now possible to set mode switch setting for each neighbor.
  • Add needed features to act as TBU for the Wi-SUN certification:
    • Add support for customizable 6LoWPAN MTU
    • Allow to forward received frames to Wireshark
    • Add pan_size parameter to simulate a busy network
    • Fix EUI64 exposed on DBus when an external DHCP is in use
  • Change the file format of the stored data (aka NVM). The new format is human readable. Several interesting items can now be easily retrieved (GAK, GTK, PMK, PTK, active keys, etc.).
  • By default, the storage folder is no longer readable by other users.
  • Report nodes on the DBus interface as soon as they are authenticated (until now, they were reported once registered on RPL tree). The user can check the "parent" property to check if the node is registered to the RPL tree.
  • Add a DBus API to subscribe the network to external multicast frames. This API is mandated by the Wi-SUN specification. It replaces the MLDv2 (= IGMPv3 for IPv6) protocol available on classical IPv6 networks.
  • Drop DBus APIs AddRootCertificate and RemoveRootCertificate. We suggest relying on external Radius server for production usage.
  • Allow mixing channel plans. We now compare the compatibility of the set of RF parameters.
  • Remove 10 sec delay on start.
  • Time was lost when the server restarted.
  • Increase precision of "channel 0 frequency" displayed on start.
  • Remove some useless traces.
  • Fix possible latency when new neighbor is detected with neighbor_proxy enabled.
  • Fix PAN config and PAN advert trickles.
  • Fix default permissions of cryptographic material.
  • Fix channel mask usage in asynchronous frames.
  • Add documentation for the DBus API.
  • Mention CPC in the compilation instructions.
  • Simplify timers handling. Also add a trace to track timers usage.
  • Simplify internal DHCP server.

v1.4

  • Fix issues related to the internal network interface. This interface has been dropped. This implies some changes on the way the interface brings up, but they do not impact common user. The only known issue is ndppd won't works anymore. But the user can replace it by neighbor_proxy
  • Improve support for tun_autoconf = false. The native IP address is properly used has network prefix and as DODAGID.
  • Add support for neighbor_proxy parameter. neighbor_proxy allows to create a transparent bridge between the existing IPv6 network and the Wi-SUN network. Wi-SUN network and ethernet network will use the same IPv6 prefix and all the hosts will see each other with adding any route on the upstream router. This parameter rplace the use of ndppd.
  • Fix support for channel plan 2. Channel plan 2 is now automatically advertised when the user request FAN1.1 PHY.
  • Drop support for TAP interface (the use_tap parameter). It was only provided to support ISC-DHCP. Instead we provide patch for ISC-DHCP and explanations to work with dnsmasq as an alternative.
  • Drop the internal DHCP relay implementation. The parameter dhcpv6_server does not exist anymore. The user can now run dhcp_relay beside wsbrd (he has to use internal_dhcp=false).
  • Add support for CPC protocol as an alternative to the traditional UART. The CPC protocol bring support for encrypted link and SPI bus.
  • Output is no more colored when redirected. The new parameter color_output allow to enforce this behavior.
  • Allow to disable storage with storage_prefix = -.
  • Fix error catching when certificates are incorrect.
  • Fix default permissions of /var/lib/wsbrd
  • Fix paths for examples certificates in examples/wsbrd.conf during the install process.
  • Emit a DBus signal when the network topology change.
  • DBus API expose IPv6 of the nodes.
  • Drop DebugPing DBus method since there is no more internal IP stack.
  • Introduce wsbrd-fuzz, a developer tool allowing to craft complex scenarios. It can also been used to interface with fuzzing tools (ie. American Fuzzing Lop).
  • Fix warnings during the build

v1.3.3

  • Fix compilation of wsbrd_cli with old Cargo/Rust versions.

v1.3.2

  • Fix support for external Radius server
  • Fix simulation tools

v1.3.1

  • Fix buffer overflow when mode switch capabilities are advertised.
  • Fix segfault when custom domain is in use.
  • Fix the RF configuration displayed on start up.
  • Slightly change the default lifetimes of MPL and PAN version.

v1.3.0

  • Add support for external DHCP server
  • Add support for external Radius server
  • Add support for custom regulation domains
  • allowed_channels now also impact broadcast and asynchronous frames
  • Add support for --list-rf-configs allowing to get the RF configurations supported by the RCP. Mainly useful for people who want to use custom RF configurations.
  • Display RF configuration and channel masks on start up. So it is now easier to setup a custom configuration domain.
  • Catch error from the RCP of the RF configuration is not supported
  • Add support for TAP network interface instead of a TUN network interface
  • Provide wsbrd_cli, a sample client for the DBus interface
  • DBus interface now expose the RPL tree
  • Add alpha support for POM-IE
  • Add alpha support for SetModeSwitch DBus API
  • Improve traces. It is now possible to trace these events: trickles, 15.4-mngt, 15.4, eap, icmp-rf, icmp-tun, dhcp
  • Disable the non standard algorithm that restrict the Tx windows. The new DBus API SetSlotAlgorithm allow to restore previous behavior. Please report a bug if you encounter any performance hit with the new default configuration.
  • The RF configurations advertised by remotes are now better compared with the local RF configuration. So, if a node with with a custom regulatory domain try to connect to a BR with a classical domain, they can connect eah other if they are compatible.
  • Improve reliability of the UART link. wsbrd is now able to resend corrupted frames.
  • Protect UART against concurrent accesses (typically with minicom or another wsbrd instance)
  • Increase the range of available UART baudrates
  • wsbrd now relies on Linux for IPv6 fragmentation (while it was done internally until now)
  • There is no more default values for "mode" and "class" parameters. They are mandatory now
  • Improve interoperability for ARIB
  • Fix excluded channels advertised (unicast and broadcast)
  • Fix case where \x00 was used in configuration file
  • Fix internal timer ticks, wsbrd now wake-up less often
  • Fix some bugs in traces display
  • Provide configuration files for systemd

v1.2.0

  • Add a D-Bus API to retrieve list of nodes and their parents. This API can be used by third party application to draw diagrams of the network
  • Add automatic subscription to multicast group ff03::
  • Add initial support for region regulations, initially only for ARIB (Japan)
  • Drop built-in MbedTLS; now users must build their own (see README for install instructions)
  • Fix missing fields in RCP protocol to support high data rates
  • Allow connection to the RCP even if the OS/HW buffers contain garbage
  • Fix possible overflow on timer IDs
  • Improve simulation tools (developers)

v1.1.0

v1.0.4

  • Fix possible dead-lock when wsbrd is started simultaneously with the RCP

v1.0.3

  • Fix regression during ninja install introduced in v1.0.2

v1.0.2

  • Support the way RCP >= 0.5.0 reset. This fix case where node were unable to reconnect after wsbrd restarted
  • Fix warning when RCP >= 0.5.0 starts
  • Remove useless --baudrate and --hardflow (it is still possible to use "-o uart_baudrate=115200" and "-o uart_rtscts=true"
  • Fix typos in broadcast_interval, broadcast_dwell_interval and unicast_dwell_interval
  • Show location when a certificate cannot be read

v1.0.1

  • Fix string termination in the configuration file. Especially, the network name could be wrong when specified twice
  • Fix a possible deadlock on high workload
  • Fix a possible deadlock when events are canceled
  • Fix support for Chinese PHY
  • Make DBus start more reliable when launched with sudo
  • Fix backtrace display on ARM hosts
  • Improve documentation

v1.0.0

  • Fix compatibility with RCP < 0.4.0 (which has a race condition in the UART frames reception)
  • Improve case where nodes are ejected from the network (add support for MCPS purge)
  • Do not show secrets in logs anymore
  • If available, show backtraces when a bug occurs

v0.4.0

  • Allow the filtering of Wi-SUN nodes. Mainly used to build specific network topologies
  • Allow retrieving GAKs from DBus interface
  • Add DBus events when GTKs and GAKs are modified
  • Fix build error if libsystemd is not available
  • Also copy documentation during the install process

v0.3.1

  • File "CHANGES" has been added in branch v0.2, but not in the main branch.

v0.3.0

  • Add DBus interface
  • Allow changing the TX power
  • Allow setting the UART device from a configuration file
  • Allow setting the PAN ID
  • Allow changing parameters relative to GTK lifetime
  • Allow changing dwell delays
  • Fix bug with frames > 1200 bytes
  • Fix error when prefix_storage did not end with '/'
  • Drop references to SPI bus since it is not yet implemented
  • Examples were not copied in the right directory

v0.2.3

  • File "CHANGES" was missing

v0.2.2

  • Fix creation of /var/lib/wsbrd during install

v0.2.1

  • v0.2.0 broke IPv6 routing

v0.2.0

  • Do not rely on external Router Advertisements anymore. It is no more necessary to launch radvd before wsbrd. wsbrd now relies on ipv6_prefix parameter.
  • Add parameter "tun_autoconf" to automatically configure the IP of the tun interface seen by Linux.
  • Command-line now accepts any parameter accepted in a configuration file through "-o KEY=VAL".
  • Fix accepted range for ws_class
  • Change default location of non-volatile data (was /tmp, it is now /var/lib/wsbrd)
  • Allow configuring location (and file prefix) of the non-volatile data
  • Allow setting initial GTKs
  • Add a list of valid domain/mode/class combinations in the documentation
  • Fix possible crash on 32bits hosts
  • Remove some traces
  • Provide a better error message if RCP firmware < 0.0.3 replies

v0.1.2

  • Fix support for allowed_channel
  • Improve documentation
  • Add a release note

v0.1.1

  • Add support for allowed_channel
  • Change the default size of the network (it is "small" now)
  • Do not raise an error if certificates are overloaded from the command line

v0.1

  • Fix random seed
  • Increase the number of EAPOL slots

v0.0.7

  • Initial pre-alpha release