Skip to content

Latest commit

 

History

History
7216 lines (5454 loc) · 135 KB

server_configurations.md

File metadata and controls

7216 lines (5454 loc) · 135 KB
Raw

Configurations

LSP configs provided by nvim-lspconfig are listed below. This documentation is autogenerated from the Lua files. You can view this file in Nvim by running :help lspconfig-all.

als

https://github.com/AdaCore/ada_language_server

Installation instructions can be found here.

Can be configured by passing a "settings" object to als.setup{}:

require('lspconfig').als.setup{
    settings = {
      ada = {
        projectFile = "project.gpr";
        scenarioVariables = { ... };
      }
    }
}

Snippet to enable the language server:

require'lspconfig'.als.setup{}

Default values:

  • cmd :
{ "ada_language_server" }
  • filetypes :
{ "ada" }
  • root_dir :
util.root_pattern("Makefile", ".git", "*.gpr", "*.adc")

angularls

https://github.com/angular/vscode-ng-language-service

angular-language-server can be installed via npm npm install -g @angular/language-server.

Note, that if you override the default cmd, you must also update on_new_config to set new_config.cmd during startup.

local project_library_path = "/path/to/project/lib"
local cmd = {"ngserver", "--stdio", "--tsProbeLocations", project_library_path , "--ngProbeLocations", project_library_path}

require'lspconfig'.angularls.setup{
  cmd = cmd,
  on_new_config = function(new_config,new_root_dir)
    new_config.cmd = cmd
  end,
}

Snippet to enable the language server:

require'lspconfig'.angularls.setup{}

Default values:

  • cmd :
{ "ngserver", "--stdio", "--tsProbeLocations", "", "--ngProbeLocations", "" }
  • filetypes :
{ "typescript", "html", "typescriptreact", "typescript.tsx" }
  • root_dir :
root_pattern("angular.json", ".git")

ansiblels

https://github.com/ansible/ansible-language-server

Language server for the ansible configuration management tool.

ansible-language-server can be installed via npm:

npm install -g @ansible/ansible-language-server

Snippet to enable the language server:

require'lspconfig'.ansiblels.setup{}

Default values:

  • cmd :
{ "ansible-language-server", "--stdio" }
  • filetypes :
{ "yaml.ansible" }
  • root_dir :
see source file
  • settings :
{
  ansible = {
    ansible = {
      path = "ansible"
    },
    ansibleLint = {
      enabled = true,
      path = "ansible-lint"
    },
    executionEnvironment = {
      enabled = false
    },
    python = {
      interpreterPath = "python"
    }
  }
}
  • single_file_support :
true

antlersls

https://www.npmjs.com/package/antlers-language-server

antlersls can be installed via npm:

npm install -g antlers-language-server

Snippet to enable the language server:

require'lspconfig'.antlersls.setup{}

Default values:

  • cmd :
{ "antlersls", "--stdio" }
  • filetypes :
{ "html", "antlers" }
  • root_dir :
see source file

apex_ls

https://github.com/forcedotcom/salesforcedx-vscode

Language server for Apex.

For manual installation, download the JAR file from the VSCode extension.

require'lspconfig'.apex_ls.setup {
  apex_jar_path = '/path/to/apex-jorje-lsp.jar',
  apex_enable_semantic_errors = false, -- Whether to allow Apex Language Server to surface semantic errors
  apex_enable_completion_statistics = false, -- Whether to allow Apex Language Server to collect telemetry on code completion usage
}

Snippet to enable the language server:

require'lspconfig'.apex_ls.setup{}

Default values:

  • filetypes :
{ "apexcode" }
  • on_new_config :
see source file
  • root_dir :
root_pattern('sfdx-project.json')

arduino_language_server

https://github.com/arduino/arduino-language-server

Language server for Arduino

The arduino-language-server can be installed by running:

go install github.com/arduino/arduino-language-server@latest

The arduino-cli tool must also be installed. Follow these installation instructions for your platform.

After installing arduino-cli, follow these instructions for generating a configuration file if you haven't done so already, and make sure you install any relevant platforms libraries. Make sure to save the full path to the created arduino-cli.yaml file for later.

The language server also requires clangd to be installed. Follow these installation instructions for your platform.

Next, you will need to decide which FQBN to use. To identify the available FQBNs for boards you currently have connected, you may use the arduino-cli command, like so:

$ arduino-cli board list
Port         Protocol Type              Board Name  FQBN            Core
/dev/ttyACM0 serial   Serial Port (USB) Arduino Uno arduino:avr:uno arduino:avr
                                                    ^^^^^^^^^^^^^^^

After all dependencies are installed you'll need to set the command for the language server in your setup:

require'lspconfig'.arduino_language_server.setup {
  cmd = {
    "arduino-language-server",
    "-cli-config", "/path/to/arduino-cli.yaml",
    "-fqbn", "arduino:avr:uno",
    "-cli", "arduino-cli",
    "-clangd", "clangd"
  }
}

For further instruction about configuration options, run arduino-language-server --help.

Snippet to enable the language server:

require'lspconfig'.arduino_language_server.setup{}

Default values:

  • filetypes :
{ "arduino" }
  • root_dir :
see source file

asm_lsp

https://github.com/bergercookie/asm-lsp

Language Server for GAS/GO Assembly

asm-lsp can be installed via cargo: cargo install asm-lsp

Snippet to enable the language server:

require'lspconfig'.asm_lsp.setup{}

Default values:

  • cmd :
{ "asm-lsp" }
  • filetypes :
{ "asm", "vmasm" }
  • root_dir :
see source file

astro

https://github.com/withastro/language-tools/tree/main/packages/language-server

astro-ls can be installed via npm:

npm install -g @astrojs/language-server

Snippet to enable the language server:

require'lspconfig'.astro.setup{}

Default values:

  • cmd :
{ "astro-ls", "--stdio" }
  • filetypes :
{ "astro" }
  • init_options :
{
  configuration = {}
}
  • root_dir :
root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git")

awk_ls

https://github.com/Beaglefoot/awk-language-server/

awk-language-server can be installed via npm:

npm install -g awk-language-server

Snippet to enable the language server:

require'lspconfig'.awk_ls.setup{}

Default values:

  • cmd :
{ "awk-language-server" }
  • filetypes :
{ "awk" }
  • single_file_support :
true

bashls

https://github.com/mads-hartmann/bash-language-server

bash-language-server can be installed via npm:

npm i -g bash-language-server

Language server for bash, written using tree sitter in typescript.

Snippet to enable the language server:

require'lspconfig'.bashls.setup{}

Default values:

  • cmd :
{ "bash-language-server", "start" }
  • cmd_env :
{
  GLOB_PATTERN = "*@(.sh|.inc|.bash|.command)"
}
  • filetypes :
{ "sh" }
  • root_dir :
util.find_git_ancestor
  • single_file_support :
true

beancount

https://github.com/polarmutex/beancount-language-server#installation

See https://github.com/polarmutex/beancount-language-server#configuration for configuration options

Snippet to enable the language server:

require'lspconfig'.beancount.setup{}

Default values:

  • cmd :
{ "beancount-language-server", "--stdio" }
  • filetypes :
{ "beancount", "bean" }
  • init_options :
{
  journalFile = ""
}
  • root_dir :
root_pattern(".git")
  • single_file_support :
true

bicep

https://github.com/azure/bicep Bicep language server

Bicep language server can be installed by downloading and extracting a release of bicep-langserver.zip from Bicep GitHub releases.

Bicep language server requires the dotnet-sdk to be installed.

Neovim does not have built-in support for the bicep filetype which is required for lspconfig to automatically launch the language server.

Filetype detection can be added via an autocmd:

vim.cmd [[ autocmd BufNewFile,BufRead *.bicep set filetype=bicep ]]

By default, bicep language server does not have a cmd set. This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set cmd to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary.

local bicep_lsp_bin = "/path/to/bicep-langserver/Bicep.LangServer.dll"
require'lspconfig'.bicep.setup{
    cmd = { "dotnet", bicep_lsp_bin };
    ...
}

To download the latest release and place in /usr/local/bin/bicep-langserver:

(cd $(mktemp -d) \
    && curl -fLO https://github.com/Azure/bicep/releases/latest/download/bicep-langserver.zip \
    && rm -rf /usr/local/bin/bicep-langserver \
    && unzip -d /usr/local/bin/bicep-langserver bicep-langserver.zip)

Snippet to enable the language server:

require'lspconfig'.bicep.setup{}

Default values:

  • filetypes :
{ "bicep" }
  • init_options :
{}
  • root_dir :
util.find_git_ancestor

bsl_ls

https://github.com/1c-syntax/bsl-language-server

Language Server Protocol implementation for 1C (BSL) - 1C:Enterprise 8 and OneScript languages.

Snippet to enable the language server:

require'lspconfig'.bsl_ls.setup{}

Default values:

  • filetypes :
{ "bsl", "os" }
  • root_dir :
root_pattern(".git")

ccls

https://github.com/MaskRay/ccls/wiki

ccls relies on a JSON compilation database specified as compile_commands.json or, for simpler projects, a .ccls. For details on how to automatically generate one using CMake look here. Alternatively, you can use Bear.

Customization options are passed to ccls at initialization time via init_options, a list of available options can be found here. For example:

local lspconfig = require'lspconfig'
lspconfig.ccls.setup {
  init_options = {
    compilationDatabaseDirectory = "build";
    index = {
      threads = 0;
    };
    clang = {
      excludeArgs = { "-frounding-math"} ;
    };
  }
}

Snippet to enable the language server:

require'lspconfig'.ccls.setup{}

Default values:

  • cmd :
{ "ccls" }
  • filetypes :
{ "c", "cpp", "objc", "objcpp" }
  • offset_encoding :
"utf-32"
  • root_dir :
root_pattern('compile_commands.json', '.ccls', '.git')
  • single_file_support :
false

clangd

https://clangd.llvm.org/installation.html

Snippet to enable the language server:

require'lspconfig'.clangd.setup{}

Commands:

  • ClangdSwitchSourceHeader: Switch between source/header

Default values:

  • capabilities :
default capabilities, with offsetEncoding utf-8
  • cmd :
{ "clangd" }
  • filetypes :
{ "c", "cpp", "objc", "objcpp", "cuda" }
  • root_dir :
        root_pattern(
          '.clangd',
          '.clang-tidy',
          '.clang-format',
          'compile_commands.json',
          'compile_flags.txt',
          'configure.ac',
          '.git'
        )
  • single_file_support :
true

clarity_lsp

clarity-lsp is a language server for the Clarity language. Clarity is a decidable smart contract language that optimizes for predictability and security. Smart contracts allow developers to encode essential business logic on a blockchain.

To learn how to configure the clarity language server, see the clarity-lsp documentation.

Snippet to enable the language server:

require'lspconfig'.clarity_lsp.setup{}

Default values:

  • cmd :
{ "clarity-lsp" }
  • filetypes :
{ "clar", "clarity" }
  • root_dir :
root_pattern(".git")

clojure_lsp

https://github.com/snoe/clojure-lsp

Clojure Language Server

Snippet to enable the language server:

require'lspconfig'.clojure_lsp.setup{}

Default values:

  • cmd :
{ "clojure-lsp" }
  • filetypes :
{ "clojure", "edn" }
  • root_dir :
root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git")

cmake

https://github.com/regen100/cmake-language-server

CMake LSP Implementation

Snippet to enable the language server:

require'lspconfig'.cmake.setup{}

Default values:

  • cmd :
{ "cmake-language-server" }
  • filetypes :
{ "cmake" }
  • init_options :
{
  buildDirectory = "build"
}
  • root_dir :
root_pattern('CMakePresets.json', 'CTestConfig.cmake', '.git', 'build', 'cmake')
  • single_file_support :
true

codeqlls

Reference: https://help.semmle.com/codeql/codeql-cli.html

Binaries: https://github.com/github/codeql-cli-binaries

Snippet to enable the language server:

require'lspconfig'.codeqlls.setup{}

Default values:

  • before_init :
see source file
  • cmd :
{ "codeql", "execute", "language-server", "--check-errors", "ON_CHANGE", "-q" }
  • filetypes :
{ "ql" }
  • log_level :
2
  • root_dir :
see source file
  • settings :
{
  search_path = "list containing all search paths, eg: '~/codeql-home/codeql-repo'"
}

crystalline

https://github.com/elbywan/crystalline

Crystal language server.

Snippet to enable the language server:

require'lspconfig'.crystalline.setup{}

Default values:

  • cmd :
{ "crystalline" }
  • filetypes :
{ "crystal" }
  • root_dir :
root_pattern('shard.yml', '.git')
  • single_file_support :
true

csharp_ls

https://github.com/razzmatazz/csharp-language-server

Language Server for C#.

csharp-ls requires the dotnet-sdk to be installed.

The preferred way to install csharp-ls is with dotnet tool install --global csharp-ls.

Snippet to enable the language server:

require'lspconfig'.csharp_ls.setup{}

Default values:

  • cmd :
{ "csharp-ls" }
  • filetypes :
{ "cs" }
  • init_options :
{
  AutomaticWorkspaceInit = true
}
  • root_dir :
see source file

cssls

https://github.com/hrsh7th/vscode-langservers-extracted

css-languageserver can be installed via npm:

npm i -g vscode-langservers-extracted

Neovim does not currently include built-in snippets. vscode-css-language-server only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup.

--Enable (broadcasting) snippet capability for completion
local capabilities = vim.lsp.protocol.make_client_capabilities()
capabilities.textDocument.completion.completionItem.snippetSupport = true

require'lspconfig'.cssls.setup {
  capabilities = capabilities,
}

Snippet to enable the language server:

require'lspconfig'.cssls.setup{}

Default values:

  • cmd :
{ "vscode-css-language-server", "--stdio" }
  • filetypes :
{ "css", "scss", "less" }
  • root_dir :
root_pattern("package.json", ".git") or bufdir
  • settings :
{
  css = {
    validate = true
  },
  less = {
    validate = true
  },
  scss = {
    validate = true
  }
}
  • single_file_support :
true

cssmodules_ls

https://github.com/antonk52/cssmodules-language-server

Language server for autocompletion and go-to-definition functionality for CSS modules.

You can install cssmodules-language-server via npm:

npm install -g cssmodules-language-server

Snippet to enable the language server:

require'lspconfig'.cssmodules_ls.setup{}

Default values:

  • cmd :
{ "cssmodules-language-server" }
  • filetypes :
{ "javascript", "javascriptreact", "typescript", "typescriptreact" }
  • root_dir :
root_pattern("package.json")

cucumber_language_server

https://cucumber.io https://github.com/cucumber/common https://www.npmjs.com/package/@cucumber/language-server

Language server for Cucumber.

cucumber-language-server can be installed via npm:

npm install -g @cucumber/language-server

Snippet to enable the language server:

require'lspconfig'.cucumber_language_server.setup{}

Default values:

  • cmd :
{ "cucumber-language-server", "--stdio" }
  • filetypes :
{ "cucumber" }
  • root_dir :
util.find_git_ancestor

dagger

https://github.com/dagger/cuelsp

Dagger's lsp server for cuelang.

Snippet to enable the language server:

require'lspconfig'.dagger.setup{}

Default values:

  • cmd :
{ "cuelsp" }
  • filetypes :
{ "cue" }
  • root_dir :
root_pattern("cue.mod", ".git")
  • single_file_support :
true

dartls

https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec

Language server for dart.

Snippet to enable the language server:

require'lspconfig'.dartls.setup{}

Default values:

  • cmd :
{ "dart", "language-server", "--protocol=lsp" }
  • filetypes :
{ "dart" }
  • init_options :
{
  closingLabels = true,
  flutterOutline = true,
  onlyAnalyzeProjectsWithOpenFiles = true,
  outline = true,
  suggestFromUnimportedLibraries = true
}
  • root_dir :
root_pattern("pubspec.yaml")
  • settings :
{
  dart = {
    completeFunctionCalls = true,
    showTodos = true
  }
}

denols

https://github.com/denoland/deno

Deno's built-in language server

To appropriately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages in your init.lua. Example:

vim.g.markdown_fenced_languages = {
  "ts=typescript"
}

Snippet to enable the language server:

require'lspconfig'.denols.setup{}

Commands:

  • DenolsCache: Cache a module and all of its dependencies.

Default values:

  • cmd :
{ "deno", "lsp" }
  • filetypes :
{ "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" }
  • handlers :
{
  ["textDocument/definition"] = <function 1>,
  ["textDocument/references"] = <function 1>,
  ["workspace/executeCommand"] = <function 2>
}
  • init_options :
{
  enable = true,
  unstable = false
}
  • root_dir :
root_pattern("deno.json", "deno.jsonc", ".git")
  • single_file_support :
true

dhall_lsp_server

https://github.com/dhall-lang/dhall-haskell/tree/master/dhall-lsp-server

language server for dhall

dhall-lsp-server can be installed via cabal:

cabal install dhall-lsp-server

prebuilt binaries can be found here.

Snippet to enable the language server:

require'lspconfig'.dhall_lsp_server.setup{}

Default values:

  • cmd :
{ "dhall-lsp-server" }
  • filetypes :
{ "dhall" }
  • root_dir :
root_pattern(".git")
  • single_file_support :
true

diagnosticls

https://github.com/iamcco/diagnostic-languageserver

Diagnostic language server integrate with linters.

Snippet to enable the language server:

require'lspconfig'.diagnosticls.setup{}

Default values:

  • cmd :
{ "diagnostic-languageserver", "--stdio" }
  • filetypes :
Empty by default, override to add filetypes
  • root_dir :
Vim's starting directory
  • single_file_support :
true

dockerls

https://github.com/rcjsuen/dockerfile-language-server-nodejs

docker-langserver can be installed via npm:

npm install -g dockerfile-language-server-nodejs

Snippet to enable the language server:

require'lspconfig'.dockerls.setup{}

Default values:

  • cmd :
{ "docker-langserver", "--stdio" }
  • filetypes :
{ "dockerfile" }
  • root_dir :
root_pattern("Dockerfile")
  • single_file_support :
true

dotls

https://github.com/nikeee/dot-language-server

dot-language-server can be installed via npm:

npm install -g dot-language-server

Snippet to enable the language server:

require'lspconfig'.dotls.setup{}

Default values:

  • cmd :
{ "dot-language-server", "--stdio" }
  • filetypes :
{ "dot" }
  • root_dir :
see source file
  • single_file_support :
true

efm

https://github.com/mattn/efm-langserver

General purpose Language Server that can use specified error message format generated from specified command.

Requires at minimum EFM version v0.0.38 to support launching the language server on single files. If on an older version of EFM, disable single file support:

require('lspconfig')['efm'].setup{
  settings = ..., -- You must populate this according to the EFM readme
  filetypes = ..., -- Populate this according to the note below
  single_file_support = false, -- This is the important line for supporting older version of EFM
}

Note: In order for neovim's built-in language server client to send the appropriate languageId to EFM, you must specify filetypes in your call to setup{}. Otherwise lspconfig will launch EFM on the BufEnter instead of the FileType autocommand, and the filetype variable used to populate the languageId will not yet be set.

require('lspconfig')['efm'].setup{
  settings = ..., -- You must populate this according to the EFM readme
  filetypes = { 'python','cpp','lua' }
}

Snippet to enable the language server:

require'lspconfig'.efm.setup{}

Default values:

  • cmd :
{ "efm-langserver" }
  • root_dir :
util.root_pattern(".git")
  • single_file_support :
true

elixirls

https://github.com/elixir-lsp/elixir-ls

elixir-ls can be installed by following the instructions here.

curl -fLO https://github.com/elixir-lsp/elixir-ls/releases/latest/download/elixir-ls.zip
unzip elixir-ls.zip -d /path/to/elixir-ls
# Unix
chmod +x /path/to/elixir-ls/language_server.sh

By default, elixir-ls doesn't have a cmd set. This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set cmd to the absolute path ($HOME and ~ are not expanded) of your unzipped elixir-ls.

require'lspconfig'.elixirls.setup{
    -- Unix
    cmd = { "/path/to/elixir-ls/language_server.sh" };
    -- Windows
    cmd = { "/path/to/elixir-ls/language_server.bat" };
    ...
}

Snippet to enable the language server:

require'lspconfig'.elixirls.setup{}

Default values:

  • filetypes :
{ "elixir", "eelixir", "heex" }
  • root_dir :
root_pattern("mix.exs", ".git") or vim.loop.os_homedir()

elmls

https://github.com/elm-tooling/elm-language-server#installation

If you don't want to use Nvim to install it, then you can use:

npm install -g elm elm-test elm-format @elm-tooling/elm-language-server

Snippet to enable the language server:

require'lspconfig'.elmls.setup{}

Default values:

  • cmd :
{ "elm-language-server" }
  • filetypes :
{ "elm" }
  • init_options :
{
  elmAnalyseTrigger = "change"
}
  • root_dir :
root_pattern("elm.json")

ember

https://github.com/lifeart/ember-language-server

ember-language-server can be installed via npm:

npm install -g @lifeart/ember-language-server

Snippet to enable the language server:

require'lspconfig'.ember.setup{}

Default values:

  • cmd :
{ "ember-language-server", "--stdio" }
  • filetypes :
{ "handlebars", "typescript", "javascript" }
  • root_dir :
root_pattern("ember-cli-build.js", ".git")

emmet_ls

https://github.com/aca/emmet-ls

Package can be installed via npm:

npm install -g emmet-ls

Snippet to enable the language server:

require'lspconfig'.emmet_ls.setup{}

Default values:

  • cmd :
{ "emmet-ls", "--stdio" }
  • filetypes :
{ "html", "typescriptreact", "javascriptreact", "css", "sass", "scss", "less" }
  • root_dir :
git root
  • single_file_support :
true

erlangls

https://erlang-ls.github.io

Language Server for Erlang.

Clone erlang_ls Compile the project with make and copy resulting binaries somewhere in your $PATH eg. cp _build/*/bin/* ~/local/bin

Installation instruction can be found here.

Installation requirements: - Erlang OTP 21+ - rebar3 3.9.1+

Snippet to enable the language server:

require'lspconfig'.erlangls.setup{}

Default values:

  • cmd :
{ "erlang_ls" }
  • filetypes :
{ "erlang" }
  • root_dir :
root_pattern('rebar.config', 'erlang.mk', '.git')
  • single_file_support :
true

esbonio

https://github.com/swyddfa/esbonio

Esbonio is a language server for Sphinx documentation projects. The language server can be installed via pip

pip install esbonio

Since Sphinx is highly extensible you will get best results if you install the language server in the same Python environment as the one used to build your documentation. To ensure that the correct Python environment is picked up, you can either launch nvim with the correct environment activated.

source env/bin/activate
nvim

Or you can modify the default cmd to include the full path to the Python interpreter.

require'lspconfig'.esbonio.setup {
  cmd = { '/path/to/virtualenv/bin/python', '-m', 'esbonio' }
}

Esbonio supports a number of config values passed as init_options on startup, for example.

require'lspconfig'.esbonio.setup {
  init_options = {
    server = {
      logLevel = "debug"
    },
    sphinx = {
      confDir = "/path/to/docs",
      srcDir = "${confDir}/../docs-src"
    }
}

A full list and explanation of the available options can be found here

Snippet to enable the language server:

require'lspconfig'.esbonio.setup{}

Default values:

  • cmd :
{ "python3", "-m", "esbonio" }
  • filetypes :
{ "rst" }
  • root_dir :
see source file

eslint

https://github.com/hrsh7th/vscode-langservers-extracted

vscode-eslint-language-server is a linting engine for JavaScript / Typescript. It can be installed via npm:

npm i -g vscode-langservers-extracted

vscode-eslint-language-server provides an EslintFixAll command that can be used to format a document on save:

autocmd BufWritePre *.tsx,*.ts,*.jsx,*.js EslintFixAll

See vscode-eslint for configuration options.

Messages handled in lspconfig: eslint/openDoc, eslint/confirmESLintExecution, eslint/probeFailed, eslint/noLibrary

Additional messages you can handle: eslint/noConfig

Snippet to enable the language server:

require'lspconfig'.eslint.setup{}

Commands:

  • EslintFixAll: Fix all eslint problems for this buffer

Default values:

  • cmd :
{ "vscode-eslint-language-server", "--stdio" }
  • filetypes :
{ "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx", "vue" }
  • handlers :
{
  ["eslint/confirmESLintExecution"] = <function 1>,
  ["eslint/noLibrary"] = <function 2>,
  ["eslint/openDoc"] = <function 3>,
  ["eslint/probeFailed"] = <function 4>
}
  • on_new_config :
see source file
  • root_dir :
see source file
  • settings :
{
  codeAction = {
    disableRuleComment = {
      enable = true,
      location = "separateLine"
    },
    showDocumentation = {
      enable = true
    }
  },
  codeActionOnSave = {
    enable = false,
    mode = "all"
  },
  format = true,
  nodePath = "",
  onIgnoredFiles = "off",
  packageManager = "npm",
  quiet = false,
  rulesCustomizations = {},
  run = "onType",
  useESLintClass = false,
  validate = "on",
  workingDirectory = {
    mode = "location"
  }
}

flow

https://flow.org/ https://github.com/facebook/flow

See below for how to setup Flow itself. https://flow.org/en/docs/install/

See below for lsp command options.

npx flow lsp --help

Snippet to enable the language server:

require'lspconfig'.flow.setup{}

Default values:

  • cmd :
{ "npx", "--no-install", "flow", "lsp" }
  • filetypes :
{ "javascript", "javascriptreact", "javascript.jsx" }
  • root_dir :
root_pattern(".flowconfig")

flux_lsp

https://github.com/influxdata/flux-lsp flux-lsp can be installed via cargo:

cargo install --git https://github.com/influxdata/flux-lsp

Snippet to enable the language server:

require'lspconfig'.flux_lsp.setup{}

Default values:

  • cmd :
{ "flux-lsp" }
  • filetypes :
{ "flux" }
  • root_dir :
util.find_git_ancestor
  • single_file_support :
true

foam_ls

https://github.com/FoamScience/foam-language-server

foam-language-server can be installed via npm

npm install -g foam-language-server

Snippet to enable the language server:

require'lspconfig'.foam_ls.setup{}

Default values:

  • cmd :
{ "foam-ls", "--stdio" }
  • filetypes :
{ "foam", "OpenFOAM" }
  • root_dir :
see source file

fortls

https://github.com/gnikit/fortls

fortls is a Fortran Language Server, the server can be installed via pip

pip install fortls

Settings to the server can be passed either through the cmd option or through a local configuration file e.g. .fortls. For more information see the fortls documentation.

Snippet to enable the language server:

require'lspconfig'.fortls.setup{}

Default values:

  • cmd :
{ "fortls", "--notify_init", "--hover_signature", "--hover_language=fortran", "--use_signature_help" }
  • filetypes :
{ "fortran" }
  • root_dir :
root_pattern(".fortls")
  • settings :
{}

fsautocomplete

https://github.com/fsharp/FsAutoComplete

Language Server for F# provided by FsAutoComplete (FSAC).

FsAutoComplete requires the dotnet-sdk to be installed.

The preferred way to install FsAutoComplete is with dotnet tool install --global fsautocomplete.

Instructions to compile from source are found on the main repository.

You may also need to configure the filetype as Vim defaults to Forth for *.fs files:

autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp

This is automatically done by plugins such as PhilT/vim-fsharp, fsharp/vim-fsharp, and adelarsq/neofsharp.vim.

Snippet to enable the language server:

require'lspconfig'.fsautocomplete.setup{}

Default values:

  • cmd :
{ "fsautocomplete", "--background-service-enabled" }
  • filetypes :
{ "fsharp" }
  • init_options :
{
  AutomaticWorkspaceInit = true
}
  • root_dir :
see source file

fstar

https://github.com/FStarLang/FStar

LSP support is included in FStar. Make sure fstar.exe is in your PATH.

Snippet to enable the language server:

require'lspconfig'.fstar.setup{}

Default values:

  • cmd :
{ "fstar.exe", "--lsp" }
  • filetypes :
{ "fstar" }
  • root_dir :
util.find_git_ancestor

gdscript

https://github.com/godotengine/godot

Language server for GDScript, used by Godot Engine.

Snippet to enable the language server:

require'lspconfig'.gdscript.setup{}

Default values:

  • cmd :
{ "nc", "localhost", "6008" }
  • filetypes :
{ "gd", "gdscript", "gdscript3" }
  • root_dir :
util.root_pattern("project.godot", ".git")

ghcide

https://github.com/digital-asset/ghcide

A library for building Haskell IDE tooling. "ghcide" isn't for end users now. Use "haskell-language-server" instead of "ghcide".

Snippet to enable the language server:

require'lspconfig'.ghcide.setup{}

Default values:

  • cmd :
{ "ghcide", "--lsp" }
  • filetypes :
{ "haskell", "lhaskell" }
  • root_dir :
root_pattern("stack.yaml", "hie-bios", "BUILD.bazel", "cabal.config", "package.yaml")

ghdl_ls

https://github.com/ghdl/ghdl-language-server

A language server for VHDL, using ghdl as its backend.

ghdl-ls is part of pyghdl, for installation instructions see the upstream README.

Snippet to enable the language server:

require'lspconfig'.ghdl_ls.setup{}

Default values:

  • cmd :
{ "ghdl-ls" }
  • filetypes :
{ "vhdl" }
  • root_dir :
see source file
  • single_file_support :
true

glint

https://github.com/typed-ember/glint

https://typed-ember.gitbook.io/glint/

glint-language-server is installed when adding @glint/core to your project's devDependencies:

npm install @glint/core --save-dev

or

yarn add -D @glint/core

or

pnpm add -D @glint/core

Snippet to enable the language server:

require'lspconfig'.glint.setup{}

Default values:

  • cmd :
{ "glint-language-server" }
  • filetypes :
{ "html.handlebars", "handlebars", "typescript", "typescript.glimmer", "javascript", "javascript.glimmer" }
  • on_new_config :
see source file
  • root_dir :
see source file

golangci_lint_ls

Combination of both lint server and client

https://github.com/nametake/golangci-lint-langserver https://github.com/golangci/golangci-lint

Installation of binaries needed is done via

go install github.com/nametake/golangci-lint-langserver@latest
go install github.com/golangci/golangci-lint/cmd/[email protected]

Snippet to enable the language server:

require'lspconfig'.golangci_lint_ls.setup{}

Default values:

  • cmd :
{ "golangci-lint-langserver" }
  • filetypes :
{ "go", "gomod" }
  • init_options :
{
  command = { "golangci-lint", "run", "--out-format", "json" }
}
  • root_dir :
root_pattern('go.work') or root_pattern('go.mod', '.golangci.yaml', '.git')

gopls

https://github.com/golang/tools/tree/master/gopls

Google's lsp server for golang.

Snippet to enable the language server:

require'lspconfig'.gopls.setup{}

Default values:

  • cmd :
{ "gopls" }
  • filetypes :
{ "go", "gomod", "gowork", "gotmpl" }
  • root_dir :
root_pattern("go.mod", ".git")
  • single_file_support :
true

gradle_ls

https://github.com/microsoft/vscode-gradle

Microsoft's lsp server for gradle files

If you're setting this up manually, build vscode-gradle using ./gradlew installDist and point cmd to the gradle-language-server generated in the build directory

Snippet to enable the language server:

require'lspconfig'.gradle_ls.setup{}

Default values:

  • cmd :
{ "gradle-language-server" }
  • filetypes :
{ "groovy" }
  • init_options :
{
  settings = {
    gradleWrapperEnabled = true
  }
}
  • root_dir :
root_pattern("settings.gradle")

grammarly

https://github.com/znck/grammarly

grammarly-languageserver can be installed via npm:

npm i -g grammarly-languageserver

WARNING: Since this language server uses Grammarly's API, any document you open with it running is shared with them. Please evaluate their privacy policy before using this.

Snippet to enable the language server:

require'lspconfig'.grammarly.setup{}

Default values:

  • cmd :
{ "grammarly-languageserver", "--stdio" }
  • filetypes :
{ "markdown" }
  • handlers :
{
  ["$/updateDocumentState"] = <function 1>
}
  • root_dir :
util.find_git_ancestor
  • single_file_support :
true

graphql

https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli

graphql-lsp can be installed via npm:

npm install -g graphql-language-service-cli

Note that you must also have the graphql package installed and create a GraphQL config file.

Snippet to enable the language server:

require'lspconfig'.graphql.setup{}

Default values:

  • cmd :
{ "graphql-lsp", "server", "-m", "stream" }
  • filetypes :
{ "graphql", "typescriptreact", "javascriptreact" }
  • root_dir :
util.root_pattern('.git', '.graphqlrc*', '.graphql.config.*', 'graphql.config.*')

groovyls

https://github.com/prominic/groovy-language-server.git

Requirements:

  • Linux/macOS (for now)
  • Java 11+

groovyls can be installed by following the instructions here.

If you have installed groovy language server, you can set the cmd custom path as follow:

require'lspconfig'.groovyls.setup{
    -- Unix
    cmd = { "java", "-jar", "path/to/groovyls/groovy-language-server-all.jar" },
    ...
}

Snippet to enable the language server:

require'lspconfig'.groovyls.setup{}

Default values:

  • cmd :
{ "java", "-jar", "groovy-language-server-all.jar" }
  • filetypes :
{ "groovy" }
  • root_dir :
see source file

haxe_language_server

https://github.com/vshaxe/haxe-language-server

The Haxe language server can be built by running the following commands from the project's root directory:

npm install
npx lix run vshaxe-build -t language-server

This will create bin/server.js. Note that the server requires Haxe 3.4.0 or higher.

After building the language server, set the cmd setting in your setup function:

lspconfig.haxe_language_server.setup({
  cmd = {"node", "path/to/bin/server.js"},
})

By default, an HXML compiler arguments file named build.hxml is expected in your project's root directory. If your file is named something different, specify it using the init_options.displayArguments setting.

Snippet to enable the language server:

require'lspconfig'.haxe_language_server.setup{}

Default values:

  • cmd :
{ "haxe-language-server" }
  • filetypes :
{ "haxe" }
  • init_options :
{
  displayArguments = { "build.hxml" }
}
  • root_dir :
root_pattern("*.hxml")
  • settings :
{
  haxe = {
    executable = "haxe"
  }
}

hdl_checker

https://github.com/suoto/hdl_checker Language server for hdl-checker. Install using: pip install hdl-checker --upgrade

Snippet to enable the language server:

require'lspconfig'.hdl_checker.setup{}

Default values:

  • cmd :
{ "hdl_checker", "--lsp" }
  • filetypes :
{ "vhdl", "verilog", "systemverilog" }
  • root_dir :
util.find_git_ancestor
  • single_file_support :
true

hhvm

Language server for programs written in Hack https://hhvm.com/ https://github.com/facebook/hhvm See below for how to setup HHVM & typechecker: https://docs.hhvm.com/hhvm/getting-started/getting-started

Snippet to enable the language server:

require'lspconfig'.hhvm.setup{}

Default values:

  • cmd :
{ "hh_client", "lsp" }
  • filetypes :
{ "php", "hack" }
  • root_dir :
root_pattern(".hhconfig")

hie

https://github.com/haskell/haskell-ide-engine

the following init_options are supported (see https://github.com/haskell/haskell-ide-engine#configuration):

init_options = {
  languageServerHaskell = {
    hlintOn = bool;
    maxNumberOfProblems = number;
    diagnosticsDebounceDuration = number;
    liquidOn = bool (default false);
    completionSnippetsOn = bool (default true);
    formatOnImportOn = bool (default true);
    formattingProvider = string (default "brittany", alternate "floskell");
  }
}

Snippet to enable the language server:

require'lspconfig'.hie.setup{}

Default values:

  • cmd :
{ "hie-wrapper", "--lsp" }
  • filetypes :
{ "haskell" }
  • root_dir :
root_pattern("stack.yaml", "package.yaml", ".git")

hls

https://github.com/haskell/haskell-language-server

Haskell Language Server

Snippet to enable the language server:

require'lspconfig'.hls.setup{}

Default values:

  • cmd :
{ "haskell-language-server-wrapper", "--lsp" }
  • filetypes :
{ "haskell", "lhaskell" }
  • lspinfo :
see source file
  • root_dir :
function (filepath)
  return (
    util.root_pattern('hie.yaml', 'stack.yaml', 'cabal.project')(filepath)
    or util.root_pattern('*.cabal', 'package.yaml')(filepath)
  )
end
  • settings :
{
  haskell = {
    formattingProvider = "ormolu"
  }
}
  • single_file_support :
true

hoon_ls

https://github.com/urbit/hoon-language-server

A language server for Hoon.

The language server can be installed via npm install -g @hoon-language-server

Start a fake ~zod with urbit -F zod. Start the language server at the Urbit Dojo prompt with: |start %language-server

Snippet to enable the language server:

require'lspconfig'.hoon_ls.setup{}

Default values:

  • cmd :
{ "hoon-language-server" }
  • filetypes :
{ "hoon" }
  • root_dir :
see source file
  • single_file_support :
true

html

https://github.com/hrsh7th/vscode-langservers-extracted

vscode-html-language-server can be installed via npm:

npm i -g vscode-langservers-extracted

Neovim does not currently include built-in snippets. vscode-html-language-server only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup.

The code-formatting feature of the lsp can be controlled with the provideFormatter option.

--Enable (broadcasting) snippet capability for completion
local capabilities = vim.lsp.protocol.make_client_capabilities()
capabilities.textDocument.completion.completionItem.snippetSupport = true

require'lspconfig'.html.setup {
  capabilities = capabilities,
}

Snippet to enable the language server:

require'lspconfig'.html.setup{}

Default values:

  • cmd :
{ "vscode-html-language-server", "--stdio" }
  • filetypes :
{ "html" }
  • init_options :
{
  configurationSection = { "html", "css", "javascript" },
  embeddedLanguages = {
    css = true,
    javascript = true
  },
  provideFormatter = true
}
  • root_dir :
see source file
  • settings :
{}
  • single_file_support :
true

idris2_lsp

https://github.com/idris-community/idris2-lsp

The Idris 2 language server.

Plugins for the Idris 2 filetype include Idris2-Vim (fewer features, stable) and Nvim-Idris2 (cutting-edge, experimental).

Idris2-Lsp requires a build of Idris 2 that includes the "Idris 2 API" package. Package managers with known support for this build include the AUR and Homebrew.

If your package manager does not support the Idris 2 API, you will need to build Idris 2 from source. Refer to the the Idris 2 installation instructions for details. Steps 5 and 8 are listed as "optional" in that guide, but they are necessary in order to make the Idris 2 API available.

You need to install a version of Idris2-Lsp that is compatible with your version of Idris 2. There should be a branch corresponding to every released Idris 2 version after v0.4.0. Use the latest commit on that branch. For example, if you have Idris v0.5.1, you should use the v0.5.1 branch of Idris2-Lsp.

If your Idris 2 version is newer than the newest Idris2-Lsp branch, use the latest commit on the master branch, and set a reminder to check the Idris2-Lsp repo for the release of a compatible versioned branch.

Snippet to enable the language server:

require'lspconfig'.idris2_lsp.setup{}

Default values:

  • cmd :
{ "idris2-lsp" }
  • filetypes :
{ "idris2" }
  • root_dir :
see source file

intelephense

https://intelephense.com/

intelephense can be installed via npm:

npm install -g intelephense

Snippet to enable the language server:

require'lspconfig'.intelephense.setup{}

Default values:

  • cmd :
{ "intelephense", "--stdio" }
  • filetypes :
{ "php" }
  • root_dir :
root_pattern("composer.json", ".git")

java_language_server

https://github.com/georgewfraser/java-language-server

Java language server

Point cmd to lang_server_linux.sh or the equivalent script for macOS/Windows provided by java-language-server

Snippet to enable the language server:

require'lspconfig'.java_language_server.setup{}

Default values:

  • filetypes :
{ "java" }
  • root_dir :
see source file
  • settings :
{}

jdtls

https://projects.eclipse.org/projects/eclipse.jdt.ls

Language server for Java.

IMPORTANT: If you want all the features jdtls has to offer, nvim-jdtls is highly recommended. If all you need is diagnostics, completion, imports, gotos and formatting and some code actions you can keep reading here.

For manual installation you can download precompiled binaries from the official downloads site and ensure that the PATH variable contains the bin directory of the extracted archive.

  -- init.lua
  require'lspconfig'.jdtls.setup{}

You can also pass extra custom jvm arguments with the JDTLS_JVM_ARGS environment variable as a space separated list of arguments, that will be converted to multiple --jvm-arg= args when passed to the jdtls script. This will allow for example tweaking the jvm arguments or integration with external tools like lombok:

export JDTLS_JVM_ARGS="-javaagent:$HOME/.local/share/java/lombok.jar"

For automatic installation you can use the following unofficial installers/launchers under your own risk:

  • jdtls-launcher (Includes lombok support by default) 
      -- init.lua
  require'lspconfig'.jdtls.setup{ cmd = { 'jdtls' } }

Snippet to enable the language server:

require'lspconfig'.jdtls.setup{}

Default values:

  • cmd :
{ "jdtls", "-configuration", "/home/runner/.cache/jdtls/config", "-data", "/home/runner/.cache/jdtls/workspace" }
  • filetypes :
{ "java" }
  • handlers :
{
  ["language/status"] = <function 1>,
  ["textDocument/codeAction"] = <function 2>,
  ["textDocument/rename"] = <function 3>,
  ["workspace/applyEdit"] = <function 4>
}
  • init_options :
{
  jvm_args = {},
  workspace = "/home/runner/.cache/jdtls/workspace"
}
  • root_dir :
{
        -- Single-module projects
        {
          'build.xml', -- Ant
          'pom.xml', -- Maven
          'settings.gradle', -- Gradle
          'settings.gradle.kts', -- Gradle
        },
        -- Multi-module projects
        { 'build.gradle', 'build.gradle.kts' },
      } or vim.fn.getcwd()
  • single_file_support :
true

jedi_language_server

https://github.com/pappasam/jedi-language-server

jedi-language-server, a language server for Python, built on top of jedi

Snippet to enable the language server:

require'lspconfig'.jedi_language_server.setup{}

Default values:

  • cmd :
{ "jedi-language-server" }
  • filetypes :
{ "python" }
  • root_dir :
vim's starting directory
  • single_file_support :
true

jsonls

https://github.com/hrsh7th/vscode-langservers-extracted

vscode-json-language-server, a language server for JSON and JSON schema

vscode-json-language-server can be installed via npm:

npm i -g vscode-langservers-extracted

Neovim does not currently include built-in snippets. vscode-json-language-server only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup.

--Enable (broadcasting) snippet capability for completion
local capabilities = vim.lsp.protocol.make_client_capabilities()
capabilities.textDocument.completion.completionItem.snippetSupport = true

require'lspconfig'.jsonls.setup {
  capabilities = capabilities,
}

Snippet to enable the language server:

require'lspconfig'.jsonls.setup{}

Default values:

  • cmd :
{ "vscode-json-language-server", "--stdio" }
  • filetypes :
{ "json", "jsonc" }
  • init_options :
{
  provideFormatter = true
}
  • root_dir :
util.find_git_ancestor
  • single_file_support :
true

jsonnet_ls

https://github.com/grafana/jsonnet-language-server

A Language Server Protocol (LSP) server for Jsonnet.

The language server can be installed with go:

go install github.com/grafana/jsonnet-language-server@latest

Snippet to enable the language server:

require'lspconfig'.jsonnet_ls.setup{}

Default values:

  • cmd :
{ "jsonnet-language-server" }
  • filetypes :
{ "jsonnet", "libsonnet" }
  • on_new_config :
see source file
  • root_dir :
root_pattern("jsonnetfile.json")

julials

https://github.com/julia-vscode/julia-vscode

LanguageServer.jl can be installed with julia and Pkg:

julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.add("LanguageServer")'

where ~/.julia/environments/nvim-lspconfig is the location where the default configuration expects LanguageServer.jl to be installed.

To update an existing install, use the following command:

julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.update()'

Note: In order to have LanguageServer.jl pick up installed packages or dependencies in a Julia project, you must make sure that the project is instantiated:

julia --project=/path/to/my/project -e 'using Pkg; Pkg.instantiate()'

Snippet to enable the language server:

require'lspconfig'.julials.setup{}

Default values:

  • cmd :
{ "julia", "--startup-file=no", "--history-file=no", "-e", '    # Load LanguageServer.jl: attempt to load from ~/.julia/environments/nvim-lspconfig\n    # with the regular load path as a fallback\n    ls_install_path = joinpath(\n        get(DEPOT_PATH, 1, joinpath(homedir(), ".julia")),\n        "environments", "nvim-lspconfig"\n    )\n    pushfirst!(LOAD_PATH, ls_install_path)\n    using LanguageServer\n    popfirst!(LOAD_PATH)\n    depot_path = get(ENV, "JULIA_DEPOT_PATH", "")\n    project_path = let\n        dirname(something(\n            ## 1. Finds an explicitly set project (JULIA_PROJECT)\n            Base.load_path_expand((\n                p = get(ENV, "JULIA_PROJECT", nothing);\n                p === nothing ? nothing : isempty(p) ? nothing : p\n            )),\n            ## 2. Look for a Project.toml file in the current working directory,\n            ##    or parent directories, with $HOME as an upper boundary\n            Base.current_project(),\n            ## 3. First entry in the load path\n            get(Base.load_path(), 1, nothing),\n            ## 4. Fallback to default global environment,\n            ##    this is more or less unreachable\n            Base.load_path_expand("@v#.#"),\n        ))\n    end\n    @info "Running language server" VERSION pwd() project_path depot_path\n    server = LanguageServer.LanguageServerInstance(stdin, stdout, project_path, depot_path)\n    server.runlinter = true\n    run(server)\n  ' }
  • filetypes :
{ "julia" }
  • root_dir :
see source file
  • single_file_support :
true

kotlin_language_server

A kotlin language server which was developed for internal usage and
released afterwards. Maintaining is not done by the original author,
but by fwcd.

It is built via gradle and developed on github.
Source and additional description:
https://github.com/fwcd/kotlin-language-server

This server requires vim to be aware of the kotlin-filetype.
You could refer for this capability to:
https://github.com/udalov/kotlin-vim (recommended)
Note that there is no LICENSE specified yet.

Snippet to enable the language server:

require'lspconfig'.kotlin_language_server.setup{}

Default values:

  • cmd :
{ "kotlin-language-server" }
  • filetypes :
{ "kotlin" }
  • root_dir :
root_pattern("settings.gradle")

lean3ls

https://github.com/leanprover/lean-client-js/tree/master/lean-language-server

Lean installation instructions can be found here.

Once Lean is installed, you can install the Lean 3 language server by running

npm install -g lean-language-server

Note: that if you're using lean.nvim, that plugin fully handles the setup of the Lean language server, and you shouldn't set up lean3ls both with it and lspconfig.

Snippet to enable the language server:

require'lspconfig'.lean3ls.setup{}

Default values:

  • cmd :
{ "lean-language-server", "--stdio", "--", "-M", "4096", "-T", "100000" }
  • filetypes :
{ "lean3" }
  • offset_encoding :
"utf-32"
  • root_dir :
root_pattern("leanpkg.toml") or root_pattern(".git")
  • single_file_support :
true

leanls

https://github.com/leanprover/lean4

Lean installation instructions can be found here.

The Lean 4 language server is built-in with a Lean 4 install (and can be manually run with, e.g., lean --server).

Note: that if you're using lean.nvim, that plugin fully handles the setup of the Lean language server, and you shouldn't set up leanls both with it and lspconfig.

Snippet to enable the language server:

require'lspconfig'.leanls.setup{}

Default values:

  • cmd :
{ "lake", "serve", "--" }
  • filetypes :
{ "lean" }
  • on_new_config :
see source file
  • options :
{
  no_lake_lsp_cmd = { "lean", "--server" }
}
  • root_dir :
root_pattern("lakefile.lean", "lean-toolchain", "leanpkg.toml", ".git")
  • single_file_support :
true

lelwel_ls

https://github.com/0x2a-42/lelwel

Language server for lelwel grammars.

You can install lelwel-ls via cargo:

cargo install --features="lsp" lelwel

Snippet to enable the language server:

require'lspconfig'.lelwel_ls.setup{}

Default values:

  • cmd :
{ "lelwel-ls" }
  • filetypes :
{ "llw" }
  • root_dir :
see source file

lemminx

https://github.com/eclipse/lemminx

The easiest way to install the server is to get a binary from https://github.com/redhat-developer/vscode-xml/releases and place it on your PATH.

NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with xattr -d com.apple.quarantine lemminx. It should now run without being blocked.

Snippet to enable the language server:

require'lspconfig'.lemminx.setup{}

Default values:

  • cmd :
{ "lemminx" }
  • filetypes :
{ "xml", "xsd", "xsl", "xslt", "svg" }
  • root_dir :
util.find_git_ancestor
  • single_file_support :
true

ltex

https://github.com/valentjn/ltex-ls

LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others

To install, download the latest release and ensure ltex-ls is on your path.

To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes):

vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]]

Snippet to enable the language server:

require'lspconfig'.ltex.setup{}

Default values:

  • cmd :
{ "ltex-ls" }
  • filetypes :
{ "bib", "gitcommit", "markdown", "org", "plaintex", "rst", "rnoweb", "tex" }
  • get_language_id :
see source file
  • root_dir :
see source file
  • single_file_support :
true

m68k

https://github.com/grahambates/m68k-lsp

Language server for Motorola 68000 family assembly

m68k-lsp-server can be installed via npm:

npm install -g m68k-lsp-server

Ensure you are using the 68k asm syntax variant in Neovim.

vim.g.asmsyntax = 'asm68k'

Snippet to enable the language server:

require'lspconfig'.m68k.setup{}

Default values:

  • cmd :
{ "m68k-lsp-server", "--stdio" }
  • filetypes :
{ "asm68k" }
  • root_dir :
see source file
  • single_file_support :
true

marksman

https://github.com/artempyanykh/marksman

Marksman is a Markdown LSP server providing completion, cross-references, diagnostics, and more.

Marksman works on MacOS, Linux, and Windows and is distributed as a self-contained binary for each OS.

Pre-built binaries can be downloaded from https://github.com/artempyanykh/marksman/releases

Snippet to enable the language server:

require'lspconfig'.marksman.setup{}

Default values:

  • cmd :
{ "marksman", "server" }
  • filetypes :
{ "markdown" }
  • root_dir :
root_pattern(".git", ".marksman.toml")

metals

https://scalameta.org/metals/

Scala language server with rich IDE features.

See full instructions in the Metals documentation:

https://scalameta.org/metals/docs/editors/vim#using-an-alternative-lsp-client

Note: that if you're using nvim-metals, that plugin fully handles the setup and installation of Metals, and you shouldn't set up Metals both with it and lspconfig.

To install Metals, make sure to have coursier installed, and once you do you can install the latest Metals with cs install metals.

Snippet to enable the language server:

require'lspconfig'.metals.setup{}

Default values:

  • cmd :
{ "metals" }
  • filetypes :
{ "scala" }
  • init_options :
{
  compilerOptions = {
    snippetAutoIndent = false
  },
  isHttpEnabled = true,
  statusBarProvider = "show-message"
}
  • message_level :
4
  • root_dir :
util.root_pattern("build.sbt", "build.sc", "build.gradle", "pom.xml")

mint

https://www.mint-lang.com

Install Mint using the instructions. The language server is included since version 0.12.0.

Snippet to enable the language server:

require'lspconfig'.mint.setup{}

Default values:

  • cmd :
{ "mint", "ls" }
  • filetypes :
{ "mint" }
  • root_dir :
see source file
  • single_file_support :
true

mm0_ls

https://github.com/digama0/mm0

Language Server for the metamath-zero theorem prover.

Requires mm0-rs to be installed and available on the PATH.

Snippet to enable the language server:

require'lspconfig'.mm0_ls.setup{}

Default values:

  • cmd :
{ "mm0-rs", "server" }
  • filetypes :
{ "metamath-zero" }
  • root_dir :
see source file
  • single_file_support :
true

nickel_ls

Nickel Language Server

https://github.com/tweag/nickel

nls can be installed with nix, or cargo, from the Nickel repository.

git clone https://github.com/tweag/nickel.git

Nix:

cd nickel
nix-env -f . -i

cargo:

cd nickel/lsp/nls
cargo install --path .

In order to have lspconfig detect Nickel filetypes (a prequisite for autostarting a server), install the Nickel vim plugin.

Snippet to enable the language server:

require'lspconfig'.nickel_ls.setup{}

Default values:

  • cmd :
{ "nls" }
  • filetypes :
{ "ncl", "nickel" }
  • root_dir :
see source file

nimls

https://github.com/PMunch/nimlsp

nimlsp can be installed via the nimble package manager:

nimble install nimlsp

Snippet to enable the language server:

require'lspconfig'.nimls.setup{}

Default values:

  • cmd :
{ "nimlsp" }
  • filetypes :
{ "nim" }
  • root_dir :
see source file
  • single_file_support :
true

ocamlls

https://github.com/ocaml-lsp/ocaml-language-server

ocaml-language-server can be installed via npm

npm install -g ocaml-language-server

Snippet to enable the language server:

require'lspconfig'.ocamlls.setup{}

Default values:

  • cmd :
{ "ocaml-language-server", "--stdio" }
  • filetypes :
{ "ocaml", "reason" }
  • root_dir :
root_pattern("*.opam", "esy.json", "package.json")

ocamllsp

https://github.com/ocaml/ocaml-lsp

ocaml-lsp can be installed as described in installation guide.

To install the lsp server in a particular opam switch:

opam install ocaml-lsp-server

Snippet to enable the language server:

require'lspconfig'.ocamllsp.setup{}

Default values:

  • cmd :
{ "ocamllsp" }
  • filetypes :
{ "ocaml", "ocaml.menhir", "ocaml.interface", "ocaml.ocamllex", "reason", "dune" }
  • get_language_id :
see source file
  • root_dir :
root_pattern("*.opam", "esy.json", "package.json", ".git", "dune-project", "dune-workspace")

ols

       https://github.com/DanielGavin/ols

       `Odin Language Server`.

Snippet to enable the language server:

require'lspconfig'.ols.setup{}

Default values:

  • cmd :
{ "ols" }
  • filetypes :
{ "odin" }
  • root_dir :
util.root_pattern("ols.json", ".git")
  • single_file_support :
true

omnisharp

https://github.com/omnisharp/omnisharp-roslyn OmniSharp server based on Roslyn workspaces

omnisharp-roslyn can be installed by downloading and extracting a release from here. OmniSharp can also be built from source by following the instructions here.

OmniSharp requires the dotnet-sdk to be installed.

By default, omnisharp-roslyn doesn't have a cmd set. This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set cmd to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary.

require'lspconfig'.omnisharp.setup {
    cmd = { "dotnet", "/path/to/omnisharp/OmniSharp.dll" },

    -- Enables support for reading code style, naming convention and analyzer
    -- settings from .editorconfig.
    enable_editorconfig_support = true,

    -- If true, MSBuild project system will only load projects for files that
    -- were opened in the editor. This setting is useful for big C# codebases
    -- and allows for faster initialization of code navigation features only
    -- for projects that are relevant to code that is being edited. With this
    -- setting enabled OmniSharp may load fewer projects and may thus display
    -- incomplete reference lists for symbols.
    enable_ms_build_load_projects_on_demand = false,

    -- Enables support for roslyn analyzers, code fixes and rulesets.
    enable_roslyn_analyzers = false,

    -- Specifies whether 'using' directives should be grouped and sorted during
    -- document formatting.
    organize_imports_on_format = false,

    -- Enables support for showing unimported types and unimported extension
    -- methods in completion lists. When committed, the appropriate using
    -- directive will be added at the top of the current file. This option can
    -- have a negative impact on initial completion responsiveness,
    -- particularly for the first few completion sessions after opening a
    -- solution.
    enable_import_completion = false,

    -- Specifies whether to include preview versions of the .NET SDK when
    -- determining which version to use for project loading.
    sdk_include_prereleases = true,

    -- Only run analyzers against open files when 'enableRoslynAnalyzers' is
    -- true
    analyze_open_documents_only = false,
}

Snippet to enable the language server:

require'lspconfig'.omnisharp.setup{}

Default values:

  • analyze_open_documents_only :
false
  • enable_editorconfig_support :
true
  • enable_import_completion :
false
  • enable_ms_build_load_projects_on_demand :
false
  • enable_roslyn_analyzers :
false
  • filetypes :
{ "cs", "vb" }
  • init_options :
{}
  • on_new_config :
see source file
  • organize_imports_on_format :
false
  • root_dir :
root_pattern(".sln") or root_pattern(".csproj")
  • sdk_include_prereleases :
true

opencl_ls

https://github.com/Galarius/opencl-language-server

Build instructions can be found here.

Prebuilt binaries are available for Linux, macOS and Windows here.

Snippet to enable the language server:

require'lspconfig'.opencl_ls.setup{}

Default values:

  • cmd :
{ "opencl-language-server" }
  • filetypes :
{ "opencl" }
  • root_dir :
util.root_pattern(".git")

openscad_ls

https://github.com/dzhu/openscad-language-server

A Language Server Protocol server for OpenSCAD

You can build and install openscad-language-server binary with cargo:

cargo install openscad-language-server

Vim does not have built-in syntax for the openscad filetype currently.

This can be added via an autocmd:

vim.cmd [[ autocmd BufRead,BufNewFile *.scad set filetype=openscad ]]

or by installing a filetype plugin such as https://github.com/sirtaj/vim-openscad

Snippet to enable the language server:

require'lspconfig'.openscad_ls.setup{}

Default values:

  • cmd :
{ "openscad-language-server" }
  • filetypes :
{ "openscad" }
  • root_dir :
see source file
  • single_file_support :
true

pasls

https://github.com/genericptr/pascal-language-server

An LSP server implementation for Pascal variants that are supported by Free Pascal, including Object Pascal. It uses CodeTools from Lazarus as backend.

First set cmd to the Pascal lsp binary.

Customization options are passed to pasls as environment variables for example in your .bashrc:

export FPCDIR='/usr/lib/fpc/src'      # FPC source directory (This is the only required option for the server to work).
export PP='/usr/lib/fpc/3.2.2/ppcx64' # Path to the Free Pascal compiler executable.
export LAZARUSDIR='/usr/lib/lazarus'  # Path to the Lazarus sources.
export FPCTARGET=''                   # Target operating system for cross compiling.
export FPCTARGETCPU='x86_64'          # Target CPU for cross compiling.

Snippet to enable the language server:

require'lspconfig'.pasls.setup{}

Default values:

  • cmd :
{ "pasls" }
  • filetypes :
{ "pascal" }
  • root_dir :
see source file
  • single_file_support :
true

perlls

https://github.com/richterger/Perl-LanguageServer/tree/master/clients/vscode/perl

Perl-LanguageServer, a language server for Perl.

To use the language server, ensure that you have Perl::LanguageServer installed and perl command is on your path.

Snippet to enable the language server:

require'lspconfig'.perlls.setup{}

Default values:

  • cmd :
{ "perl", "-MPerl::LanguageServer", "-e", "Perl::LanguageServer::run", "--", "--port 13603", "--nostdio 0", "--version 2.1.0" }
  • filetypes :
{ "perl" }
  • root_dir :
vim's starting directory
  • settings :
{
  perl = {
    fileFilter = { ".pm", ".pl" },
    ignoreDirs = ".git",
    perlCmd = "perl",
    perlInc = " "
  }
}
  • single_file_support :
true

perlnavigator

https://github.com/bscan/PerlNavigator

A Perl language server

By default, perlnavigator doesn't have a cmd set. This is because nvim-lspconfig does not make assumptions about your path. You have to install the language server manually.

Clone the PerlNavigator repo, install based on the instructions, and point cmd to server.js inside the server/out directory:

cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'}

At minimum, you will need perl in your path. If you want to use a non-standard perl you will need to set your configuration like so:

settings = {
  perlnavigator = {
    perlPath = '/some/odd/location/my-perl'
  }
}

The contributes.configuration.properties section of perlnavigator's package.json has all available configuration settings. All settings have a reasonable default, but, at minimum, you may want to point perlnavigator at your perltidy and perlcritic configurations.

Snippet to enable the language server:

require'lspconfig'.perlnavigator.setup{}

Default values:

  • cmd :
{}
  • filetypes :
{ "perl" }
  • root_dir :
see source file
  • single_file_support :
true

perlpls

https://github.com/FractalBoy/perl-language-server https://metacpan.org/pod/PLS

PLS, another language server for Perl.

To use the language server, ensure that you have PLS installed and that it is in your path

Snippet to enable the language server:

require'lspconfig'.perlpls.setup{}

Default values:

  • cmd :
{ "pls" }
  • filetypes :
{ "perl" }
  • root_dir :
util.find_git_ancestor
  • settings :
{
  perl = {
    perlcritic = {
      enabled = false
    },
    syntax = {
      enabled = true
    }
  }
}
  • single_file_support :
true

phan

https://github.com/phan/phan

Installation: https://github.com/phan/phan#getting-started

Snippet to enable the language server:

require'lspconfig'.phan.setup{}

Default values:

  • cmd :
{ "phan", "-m", "json", "--no-color", "--no-progress-bar", "-x", "-u", "-S", "--language-server-on-stdin", "--allow-polyfill-parser" }
  • filetypes :
{ "php" }
  • root_dir :
root_pattern("composer.json", ".git")
  • single_file_support :
true

phpactor

https://github.com/phpactor/phpactor

Installation: https://phpactor.readthedocs.io/en/master/usage/standalone.html#global-installation

Snippet to enable the language server:

require'lspconfig'.phpactor.setup{}

Default values:

  • cmd :
{ "phpactor", "language-server" }
  • filetypes :
{ "php" }
  • root_dir :
root_pattern("composer.json", ".git")

please

https://github.com/thought-machine/please

High-performance extensible build system for reproducible multi-language builds.

The plz binary will automatically install the LSP for you on first run

Snippet to enable the language server:

require'lspconfig'.please.setup{}

Default values:

  • cmd :
{ "plz", "tool", "lps" }
  • filetypes :
{ "bzl" }
  • root_dir :
see source file
  • single_file_support :
true

powershell_es

https://github.com/PowerShell/PowerShellEditorServices

Language server for PowerShell.

To install, download and extract PowerShellEditorServices.zip from the releases. To configure the language server, set the property bundle_path to the root of the extracted PowerShellEditorServices.zip.

The default configuration doesn't set cmd unless bundle_path is specified.

require'lspconfig'.powershell_es.setup{
  bundle_path = 'c:/w/PowerShellEditorServices',
}

By default the languageserver is started in pwsh (PowerShell Core). This can be changed by specifying shell.

require'lspconfig'.powershell_es.setup{
  bundle_path = 'c:/w/PowerShellEditorServices',
  shell = 'powershell.exe',
}

Note that the execution policy needs to be set to Unrestricted for the languageserver run under PowerShell

If necessary, specific cmd can be defined instead of bundle_path. See PowerShellEditorServices to learn more.

require'lspconfig'.powershell_es.setup{
  cmd = {'pwsh', '-NoLogo', '-NoProfile', '-Command', "c:/PSES/Start-EditorServices.ps1 ..."}
}

Snippet to enable the language server:

require'lspconfig'.powershell_es.setup{}

Default values:

  • filetypes :
{ "ps1" }
  • on_new_config :
see source file
  • root_dir :
git root or current directory
  • shell :
"pwsh"
  • single_file_support :
true

prismals

Language Server for the Prisma JavaScript and TypeScript ORM

@prisma/language-server can be installed via npm

npm install -g @prisma/language-server

Snippet to enable the language server:

require'lspconfig'.prismals.setup{}

Default values:

  • cmd :
{ "prisma-language-server", "--stdio" }
  • filetypes :
{ "prisma" }
  • root_dir :
root_pattern(".git", "package.json")
  • settings :
{
  prisma = {
    prismaFmtBinPath = ""
  }
}

prosemd_lsp

https://github.com/kitten/prosemd-lsp

An experimental LSP for Markdown.

Please see the manual installation instructions: https://github.com/kitten/prosemd-lsp#manual-installation

Snippet to enable the language server:

require'lspconfig'.prosemd_lsp.setup{}

Default values:

  • cmd :
{ "prosemd-lsp", "--stdio" }
  • filetypes :
{ "markdown" }
  • root_dir :
<function 1>
  • single_file_support :
true

psalm

https://github.com/vimeo/psalm

Can be installed with composer.

composer global require vimeo/psalm

Snippet to enable the language server:

require'lspconfig'.psalm.setup{}

Default values:

  • cmd :
{ "psalm-language-server" }
  • filetypes :
{ "php" }
  • root_dir :
root_pattern("psalm.xml", "psalm.xml.dist")

puppet

LSP server for Puppet.

Installation:

  • Clone the editor-services repository: https://github.com/puppetlabs/puppet-editor-services

  • Navigate into that directory and run: bundle install

  • Install the 'puppet-lint' gem: gem install puppet-lint

  • Add that repository to $PATH.

  • Ensure you can run puppet-languageserver from outside the editor-services directory.

Snippet to enable the language server:

require'lspconfig'.puppet.setup{}

Default values:

  • cmd :
{ "puppet-languageserver", "--stdio" }
  • filetypes :
{ "puppet" }
  • root_dir :
root_pattern("manifests", ".puppet-lint.rc", "hiera.yaml", ".git")
  • single_file_support :
true

purescriptls

https://github.com/nwolverson/purescript-language-server

The purescript-language-server can be added to your project and $PATH via

  • JavaScript package manager such as npm, pnpm, Yarn, et al.
  • Nix under the nodePackages and nodePackages_latest package sets

Snippet to enable the language server:

require'lspconfig'.purescriptls.setup{}

Default values:

  • cmd :
{ "purescript-language-server", "--stdio" }
  • filetypes :
{ "purescript" }
  • root_dir :
root_pattern('spago.dhall', 'psc-package.json', 'bower.json', 'flake.nix', 'shell.nix'),

pylsp

https://github.com/python-lsp/python-lsp-server

A Python 3.6+ implementation of the Language Server Protocol.

See the project's README for installation instructions.

Configuration options are documented here. In order to configure an option, it must be translated to a nested Lua table and included in the settings aregument to the setup{} function. For example, in order to set the pylsp.plugins.pycodestyle.ignore option:

require'lspconfig'.pylsp.setup{
  settings = {
    pylsp = {
      plugins = {
        pycodestyle = {
          ignore = {'W391'},
          maxLineLength = 100
        }
      }
    }
  }
}

Note: This is a community fork of pyls.

Snippet to enable the language server:

require'lspconfig'.pylsp.setup{}

Default values:

  • cmd :
{ "pylsp" }
  • filetypes :
{ "python" }
  • root_dir :
see source file
  • single_file_support :
true

pyre

https://pyre-check.org/

pyre a static type checker for Python 3.

pyre offers an extremely limited featureset. It currently only supports diagnostics, which are triggered on save.

Do not report issues for missing features in pyre to lspconfig.

Snippet to enable the language server:

require'lspconfig'.pyre.setup{}

Default values:

  • cmd :
{ "pyre", "persistent" }
  • filetypes :
{ "python" }
  • root_dir :
see source file

pyright

https://github.com/microsoft/pyright

pyright, a static type checker and language server for python

Snippet to enable the language server:

require'lspconfig'.pyright.setup{}

Commands:

  • PyrightOrganizeImports: Organize Imports

Default values:

  • cmd :
{ "pyright-langserver", "--stdio" }
  • filetypes :
{ "python" }
  • root_dir :
see source file
  • settings :
{
  python = {
    analysis = {
      autoSearchPaths = true,
      diagnosticMode = "workspace",
      useLibraryCodeForTypes = true
    }
  }
}
  • single_file_support :
true

qml_lsp

https://invent.kde.org/sdk/qml-lsp

LSP implementation for QML (autocompletion, live linting, etc. in editors)

Snippet to enable the language server:

require'lspconfig'.qml_lsp.setup{}

Default values:

  • cmd :
{ "qml-lsp" }
  • filetypes :
{ "qml" }
  • root_dir :
see source file

quick_lint_js

https://quick-lint-js.com/

quick-lint-js finds bugs in JavaScript programs.

See installation instructions

Snippet to enable the language server:

require'lspconfig'.quick_lint_js.setup{}

Default values:

  • cmd :
{ "quick-lint-js", "--lsp-server" }
  • filetypes :
{ "javascript" }
  • root_dir :
see source file
  • single_file_support :
true

r_language_server

languageserver is an implementation of the Microsoft's Language Server Protocol for the R language.

It is released on CRAN and can be easily installed by

install.packages("languageserver")

Snippet to enable the language server:

require'lspconfig'.r_language_server.setup{}

Default values:

  • cmd :
{ "R", "--slave", "-e", "languageserver::run()" }
  • filetypes :
{ "r", "rmd" }
  • log_level :
2
  • root_dir :
root_pattern(".git") or os_homedir

racket_langserver

https://github.com/jeapostrophe/racket-langserver

The Racket language server. This project seeks to use DrRacket's public API to provide functionality that mimics DrRacket's code tools as closely as possible.

Install via raco: raco pkg install racket-langserver

Snippet to enable the language server:

require'lspconfig'.racket_langserver.setup{}

Default values:

  • cmd :
{ "racket", "--lib", "racket-langserver" }
  • filetypes :
{ "racket", "scheme" }
  • root_dir :
see source file
  • single_file_support :
true

reason_ls

Reason language server

You can install reason language server from reason-language-server repository.

Snippet to enable the language server:

require'lspconfig'.reason_ls.setup{}

Default values:

  • cmd :
{ "reason-language-server" }
  • filetypes :
{ "reason" }
  • root_dir :
see source file

remark_ls

https://github.com/remarkjs/remark-language-server

remark-language-server can be installed via npm:

npm install -g remark-language-server

remark-language-server uses the same configuration files as remark-cli.

This uses a plugin based system. Each plugin needs to be installed locally using npm or yarn.

For example, given the following .remarkrc.json:

{
  "presets": [
    "remark-preset-lint-recommended"
  ]
}

remark-preset-lint-recommended needs to be installed in the local project:

npm install remark-preset-lint-recommended

Snippet to enable the language server:

require'lspconfig'.remark_ls.setup{}

Default values:

  • cmd :
{ "remark-language-server", "--stdio" }
  • filetypes :
{ "markdown" }
  • root_dir :
see source file
  • single_file_support :
true

rescriptls

https://github.com/rescript-lang/rescript-vscode

ReScript language server

By default, rescriptls doesn't have a cmd set. This is because nvim-lspconfig does not make assumptions about your path. You have to install the language server manually.

You can use the bundled language server inside the vim-rescript repo.

Clone the vim-rescript repo and point cmd to server.js inside server/out directory:

cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'}

If you have vim-rescript installed you can also use that installation. for example if you're using packer.nvim you can set cmd to something like this:

cmd = {
  'node',
  '/home/username/.local/share/nvim/site/pack/packer/start/vim-rescript/server/out/server.js',
  '--stdio'
}

Another option is to use vscode extension release. Take a look at here for instructions.

Snippet to enable the language server:

require'lspconfig'.rescriptls.setup{}

Default values:

  • cmd :
{}
  • filetypes :
{ "rescript" }
  • root_dir :
see source file
  • settings :
{}

rls

https://github.com/rust-lang/rls

rls, a language server for Rust

See https://github.com/rust-lang/rls#setup to setup rls itself. See https://github.com/rust-lang/rls#configuration for rls-specific settings. All settings listed on the rls configuration section of the readme must be set under settings.rust as follows:

nvim_lsp.rls.setup {
  settings = {
    rust = {
      unstable_features = true,
      build_on_save = false,
      all_features = true,
    },
  },
}

If you want to use rls for a particular build, eg nightly, set cmd as follows:

cmd = {"rustup", "run", "nightly", "rls"}

Snippet to enable the language server:

require'lspconfig'.rls.setup{}

Default values:

  • cmd :
{ "rls" }
  • filetypes :
{ "rust" }
  • root_dir :
root_pattern("Cargo.toml")

rnix

https://github.com/nix-community/rnix-lsp

A language server for Nix providing basic completion and formatting via nixpkgs-fmt.

To install manually, run cargo install rnix-lsp. If you are using nix, rnix-lsp is in nixpkgs.

This server accepts configuration via the settings key.

Snippet to enable the language server:

require'lspconfig'.rnix.setup{}

Default values:

  • cmd :
{ "rnix-lsp" }
  • filetypes :
{ "nix" }
  • init_options :
{}
  • root_dir :
vim's starting directory
  • settings :
{}

robotframework_ls

https://github.com/robocorp/robotframework-lsp

Language Server Protocol implementation for Robot Framework.

Snippet to enable the language server:

require'lspconfig'.robotframework_ls.setup{}

Default values:

  • cmd :
{ "robotframework_ls" }
  • filetypes :
{ "robot" }
  • root_dir :
util.root_pattern('robotidy.toml', 'pyproject.toml')(fname) or util.find_git_ancestor(fname)

rome

https://rome.tools

Language server for the Rome Frontend Toolchain.

npm install [-g] rome

Snippet to enable the language server:

require'lspconfig'.rome.setup{}

Default values:

  • cmd :
{ "rome", "lsp" }
  • filetypes :
{ "javascript", "javascriptreact", "json", "typescript", "typescript.tsx", "typescriptreact" }
  • root_dir :
root_pattern('package.json', 'node_modules', '.git')
  • single_file_support :
true

rust_analyzer

https://github.com/rust-analyzer/rust-analyzer

rust-analyzer (aka rls 2.0), a language server for Rust

See docs for extra settings.

Snippet to enable the language server:

require'lspconfig'.rust_analyzer.setup{}

Commands:

  • CargoReload: Reload current cargo workspace

Default values:

  • cmd :
{ "rust-analyzer" }
  • filetypes :
{ "rust" }
  • root_dir :
root_pattern("Cargo.toml", "rust-project.json")
  • settings :
{
  ["rust-analyzer"] = {}
}

salt_ls

Language server for Salt configuration files. https://github.com/dcermak/salt-lsp

The language server can be installed with pip:

pip install salt-lsp

Snippet to enable the language server:

require'lspconfig'.salt_ls.setup{}

Default values:

  • cmd :
{ "salt_lsp_server" }
  • filetypes :
{ "sls" }
  • root_dir :
root_pattern('.git')
  • single_file_support :
true

scry

https://github.com/crystal-lang-tools/scry

Crystal language server.

Snippet to enable the language server:

require'lspconfig'.scry.setup{}

Default values:

  • cmd :
{ "scry" }
  • filetypes :
{ "crystal" }
  • root_dir :
root_pattern('shard.yml', '.git')
  • single_file_support :
true

serve_d

       https://github.com/Pure-D/serve-d

       `Microsoft language server protocol implementation for D using workspace-d.`
       Download a binary from https://github.com/Pure-D/serve-d/releases and put it in your $PATH.

Snippet to enable the language server:

require'lspconfig'.serve_d.setup{}

Default values:

  • cmd :
{ "serve-d" }
  • filetypes :
{ "d" }
  • root_dir :
util.root_pattern("dub.json", "dub.sdl", ".git")

sixtyfps

https://github.com/sixtyfpsui/sixtyfps SixtyFPS's language server

You can build and install sixtyfps-lsp binary with cargo:

cargo install sixtyfps-lsp

Vim does not have built-in syntax for the sixtyfps filetype currently.

This can be added via an autocmd:

vim.cmd [[ autocmd BufRead,BufNewFile *.60 set filetype=sixtyfps ]]

or by installing a filetype plugin such as https://github.com/RustemB/sixtyfps-vim

Snippet to enable the language server:

require'lspconfig'.sixtyfps.setup{}

Default values:

  • cmd :
{ "sixtyfps-lsp" }
  • filetypes :
{ "sixtyfps" }
  • single_file_support :
true

slint_lsp

https://github.com/slint-ui/slint Slint's language server

You can build and install slint-lsp binary with cargo:

cargo install slint-lsp

Vim does not have built-in syntax for the slint filetype at this time.

This can be added via an autocmd:

vim.cmd [[ autocmd BufRead,BufNewFile *.slint set filetype=slint ]]

Snippet to enable the language server:

require'lspconfig'.slint_lsp.setup{}

Default values:

  • cmd :
{ "slint-lsp" }
  • filetypes :
{ "slint" }
  • single_file_support :
true

solang

A language server for Solidity

See the documentation for installation instructions.

The language server only provides the following capabilities:

  • Syntax highlighting
  • Diagnostics
  • Hover

There is currently no support for completion, goto definition, references, or other functionality.

Snippet to enable the language server:

require'lspconfig'.solang.setup{}

Default values:

  • cmd :
{ "solang", "--language-server", "--target", "ewasm" }
  • filetypes :
{ "solidity" }
  • root_dir :
util.find_git_ancestor

solargraph

https://solargraph.org/

solargraph, a language server for Ruby

You can install solargraph via gem install.

gem install --user-install solargraph

Snippet to enable the language server:

require'lspconfig'.solargraph.setup{}

Default values:

  • cmd :
{ "solargraph", "stdio" }
  • filetypes :
{ "ruby" }
  • init_options :
{
  formatting = true
}
  • root_dir :
root_pattern("Gemfile", ".git")
  • settings :
{
  solargraph = {
    diagnostics = true
  }
}

solc

https://docs.soliditylang.org/en/latest/installing-solidity.html

solc is the native language server for the Solidity language.

Snippet to enable the language server:

require'lspconfig'.solc.setup{}

Default values:

  • cmd :
{ "solc", "--lsp" }
  • filetypes :
{ "solidity" }
  • root_dir :
root_pattern(".git")

solidity_ls

npm install -g solidity-language-server

solidity-language-server is a language server for the solidity language ported from the vscode solidity extension

Snippet to enable the language server:

require'lspconfig'.solidity_ls.setup{}

Default values:

  • cmd :
{ "solidity-language-server", "--stdio" }
  • filetypes :
{ "solidity" }
  • root_dir :
root_pattern(".git", "package.json")

sorbet

https://sorbet.org

Sorbet is a fast, powerful type checker designed for Ruby.

You can install Sorbet via gem install. You might also be interested in how to set Sorbet up for new projects: https://sorbet.org/docs/adopting.

gem install sorbet

Snippet to enable the language server:

require'lspconfig'.sorbet.setup{}

Default values:

  • cmd :
{ "srb", "tc", "--lsp" }
  • filetypes :
{ "ruby" }
  • root_dir :
root_pattern("Gemfile", ".git")

sourcekit

https://github.com/apple/sourcekit-lsp

Language server for Swift and C/C++/Objective-C.

Snippet to enable the language server:

require'lspconfig'.sourcekit.setup{}

Default values:

  • cmd :
{ "sourcekit-lsp" }
  • filetypes :
{ "swift", "c", "cpp", "objective-c", "objective-cpp" }
  • root_dir :
root_pattern("Package.swift", ".git")

sourcery

https://github.com/sourcery-ai/sourcery

Refactor Python instantly using the power of AI.

It requires the initializationOptions param to be populated as shown below and will respond with the list of ServerCapabilities that it supports.

init_options = { --- The Sourcery token for authenticating the user. --- This is retrieved from the Sourcery website and must be --- provided by each user. The extension must provide a --- configuration option for the user to provide this value. token = <YOUR_TOKEN>

--- The extension's name and version as defined by the extension.
extension_version = 'vim.lsp'

--- The editor's name and version as defined by the editor.
editor_version = 'vim'

}

Snippet to enable the language server:

require'lspconfig'.sourcery.setup{}

Default values:

  • cmd :
{ "sourcery", "lsp" }
  • filetypes :
{ "python" }
  • init_options :
{
  editor_version = "vim",
  extension_version = "vim.lsp"
}
  • root_dir :
see source file
  • single_file_support :
true

spectral

https://github.com/luizcorreia/spectral-language-server A flexible JSON/YAML linter for creating automated style guides, with baked in support for OpenAPI v2 & v3.

spectral-language-server can be installed via npm:

npm i -g spectral-language-server

See vscode-spectral for configuration options.

Snippet to enable the language server:

require'lspconfig'.spectral.setup{}

Default values:

  • cmd :
{ "spectral-language-server", "--stdio" }
  • filetypes :
{ "yaml", "json", "yml" }
  • root_dir :
see source file
  • settings :
{
  enable = true,
  run = "onType",
  validateLanguages = { "yaml", "json", "yml" }
}
  • single_file_support :
true

sqlls

https://github.com/joe-re/sql-language-server

This LSP can be installed via npm. Find further instructions on manual installation of the sql-language-server at joe-re/sql-language-server.

Snippet to enable the language server:

require'lspconfig'.sqlls.setup{}

Default values:

  • cmd :
{ "sql-language-server", "up", "--method", "stdio" }
  • filetypes :
{ "sql", "mysql" }
  • root_dir :
see source file
  • settings :
{}

sqls

https://github.com/lighttiger2505/sqls

require'lspconfig'.sqls.setup{
  cmd = {"path/to/command", "-config", "path/to/config.yml"};
  ...
}

Sqls can be installed via go get github.com/lighttiger2505/sqls. Instructions for compiling Sqls from the source can be found at lighttiger2505/sqls.

Snippet to enable the language server:

require'lspconfig'.sqls.setup{}

Default values:

  • cmd :
{ "sqls" }
  • filetypes :
{ "sql", "mysql" }
  • root_dir :
see source file
  • settings :
{}
  • single_file_support :
true

steep

https://github.com/soutaro/steep

steep is a static type checker for Ruby.

You need Steepfile to make it work. Generate it with steep init.

Snippet to enable the language server:

require'lspconfig'.steep.setup{}

Default values:

  • cmd :
{ "steep", "langserver" }
  • filetypes :
{ "ruby", "eruby" }
  • root_dir :
root_pattern("Steepfile", ".git")

stylelint_lsp

https://github.com/bmatcuk/stylelint-lsp

stylelint-lsp can be installed via npm:

npm i -g stylelint-lsp

Can be configured by passing a settings.stylelintplus object to stylelint_lsp.setup:

require'lspconfig'.stylelint_lsp.setup{
  settings = {
    stylelintplus = {
      -- see available options in stylelint-lsp documentation
    }
  }
}

Snippet to enable the language server:

require'lspconfig'.stylelint_lsp.setup{}

Default values:

  • cmd :
{ "stylelint-lsp", "--stdio" }
  • filetypes :
{ "css", "less", "scss", "sugarss", "vue", "wxss", "javascript", "javascriptreact", "typescript", "typescriptreact" }
  • root_dir :
 root_pattern('.stylelintrc', 'package.json')
  • settings :
{}

sumneko_lua

https://github.com/sumneko/lua-language-server

Lua language server.

lua-language-server can be installed by following the instructions here.

The default cmd assumes that the lua-language-server binary can be found in $PATH.

If you primarily use lua-language-server for Neovim, and want to provide completions, analysis, and location handling for plugins on runtime path, you can use the following settings.

Note: that these settings will meaningfully increase the time until lua-language-server can service initial requests (completion, location) upon starting as well as time to first diagnostics. Completion results will include a workspace indexing progress message until the server has finished indexing.

require'lspconfig'.sumneko_lua.setup {
  settings = {
    Lua = {
      runtime = {
        -- Tell the language server which version of Lua you're using (most likely LuaJIT in the case of Neovim)
        version = 'LuaJIT',
      },
      diagnostics = {
        -- Get the language server to recognize the `vim` global
        globals = {'vim'},
      },
      workspace = {
        -- Make the server aware of Neovim runtime files
        library = vim.api.nvim_get_runtime_file("", true),
      },
      -- Do not send telemetry data containing a randomized but unique identifier
      telemetry = {
        enable = false,
      },
    },
  },
}

See lua-language-server's documentation for an explanation of the above fields:

Snippet to enable the language server:

require'lspconfig'.sumneko_lua.setup{}

Default values:

  • cmd :
{ "lua-language-server" }
  • filetypes :
{ "lua" }
  • log_level :
2
  • root_dir :
root_pattern(".luarc.json", ".luacheckrc", ".stylua.toml", "stylua.toml", "selene.toml", ".git")
  • settings :
{
  Lua = {
    telemetry = {
      enable = false
    }
  }
}
  • single_file_support :
true

svelte

https://github.com/sveltejs/language-tools/tree/master/packages/language-server

Note: assuming that tsserver is setup, full JavaScript/TypeScript support (find references, rename, etc of symbols in Svelte files when working in JS/TS files) requires per-project installation and configuration of typescript-svelte-plugin.

svelte-language-server can be installed via npm:

npm install -g svelte-language-server

Snippet to enable the language server:

require'lspconfig'.svelte.setup{}

Default values:

  • cmd :
{ "svelteserver", "--stdio" }
  • filetypes :
{ "svelte" }
  • root_dir :
root_pattern("package.json", ".git")

svlangserver

https://github.com/imc-trading/svlangserver

Language server for SystemVerilog.

svlangserver can be installed via npm:

$ npm install -g @imc-trading/svlangserver

Snippet to enable the language server:

require'lspconfig'.svlangserver.setup{}

Commands:

  • SvlangserverBuildIndex: Instructs language server to rerun indexing
  • SvlangserverReportHierarchy: Generates hierarchy for the given module

Default values:

  • cmd :
{ "svlangserver" }
  • filetypes :
{ "verilog", "systemverilog" }
  • root_dir :
root_pattern(".svlangserver", ".git")
  • settings :
{
  systemverilog = {
    includeIndexing = { "*.{v,vh,sv,svh}", "**/*.{v,vh,sv,svh}" }
  }
}
  • single_file_support :
true

svls

https://github.com/dalance/svls

Language server for verilog and SystemVerilog

svls can be installed via cargo:

cargo install svls

Snippet to enable the language server:

require'lspconfig'.svls.setup{}

Default values:

  • cmd :
{ "svls" }
  • filetypes :
{ "verilog", "systemverilog" }
  • root_dir :
util.find_git_ancestor

tailwindcss

https://github.com/tailwindlabs/tailwindcss-intellisense

Tailwind CSS Language Server can be installed via npm:

npm install -g @tailwindcss/language-server

Snippet to enable the language server:

require'lspconfig'.tailwindcss.setup{}

Default values:

  • cmd :
{ "tailwindcss-language-server", "--stdio" }
  • filetypes :
{ "aspnetcorerazor", "astro", "astro-markdown", "blade", "django-html", "htmldjango", "edge", "eelixir", "ejs", "erb", "eruby", "gohtml", "haml", "handlebars", "hbs", "html", "html-eex", "heex", "jade", "leaf", "liquid", "markdown", "mdx", "mustache", "njk", "nunjucks", "php", "razor", "slim", "twig", "css", "less", "postcss", "sass", "scss", "stylus", "sugarss", "javascript", "javascriptreact", "reason", "rescript", "typescript", "typescriptreact", "vue", "svelte" }
  • init_options :
{
  userLanguages = {
    eelixir = "html-eex",
    eruby = "erb"
  }
}
  • on_new_config :
see source file
  • root_dir :
root_pattern('tailwind.config.js', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.ts', 'package.json', 'node_modules', '.git')
  • settings :
{
  tailwindCSS = {
    classAttributes = { "class", "className", "classList", "ngClass" },
    lint = {
      cssConflict = "warning",
      invalidApply = "error",
      invalidConfigPath = "error",
      invalidScreen = "error",
      invalidTailwindDirective = "error",
      invalidVariant = "error",
      recommendedVariantOrder = "warning"
    },
    validate = true
  }
}

taplo

https://taplo.tamasfe.dev/cli/usage/language-server.html

Language server for Taplo, a TOML toolkit.

taplo-cli can be installed via cargo:

cargo install --features lsp --locked taplo-cli

Snippet to enable the language server:

require'lspconfig'.taplo.setup{}

Default values:

  • cmd :
{ "taplo", "lsp", "stdio" }
  • filetypes :
{ "toml" }
  • root_dir :
root_pattern("*.toml", ".git")
  • single_file_support :
true

teal_ls

https://github.com/teal-language/teal-language-server

Install with:

luarocks install --dev teal-language-server

Snippet to enable the language server:

require'lspconfig'.teal_ls.setup{}

Default values:

  • cmd :
{ "teal-language-server" }
  • filetypes :
{ "teal" }
  • root_dir :
root_pattern("tlconfig.lua", ".git")

terraform_lsp

https://github.com/juliosueiras/terraform-lsp

Terraform language server Download a released binary from https://github.com/juliosueiras/terraform-lsp/releases.

From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp:

Both HashiCorp and the maintainer of terraform-lsp expressed interest in collaborating on a language server and are working towards a long-term goal of a single stable and feature-complete implementation.

For the time being both projects continue to exist, giving users the choice:

  • terraform-ls providing

    • overall stability (by relying only on public APIs)
    • compatibility with any provider and any Terraform >=0.12.0 currently less features
    • due to project being younger and relying on public APIs which may not offer the same functionality yet

  • terraform-lsp providing

    • currently more features
    • compatibility with a single particular Terraform (0.12.20 at time of writing)
      • configs designed for other 0.12 versions may work, but interpretation may be inaccurate
    • less stability (due to reliance on Terraform's own internal packages)

Snippet to enable the language server:

require'lspconfig'.terraform_lsp.setup{}

Default values:

  • cmd :
{ "terraform-lsp" }
  • filetypes :
{ "terraform", "hcl" }
  • root_dir :
root_pattern(".terraform", ".git")

terraformls

https://github.com/hashicorp/terraform-ls

Terraform language server Download a released binary from https://github.com/hashicorp/terraform-ls/releases.

From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp:

Both HashiCorp and the maintainer of terraform-lsp expressed interest in collaborating on a language server and are working towards a long-term goal of a single stable and feature-complete implementation.

For the time being both projects continue to exist, giving users the choice:

  • terraform-ls providing

    • overall stability (by relying only on public APIs)
    • compatibility with any provider and any Terraform >=0.12.0 currently less features
    • due to project being younger and relying on public APIs which may not offer the same functionality yet

  • terraform-lsp providing

    • currently more features
    • compatibility with a single particular Terraform (0.12.20 at time of writing)
      • configs designed for other 0.12 versions may work, but interpretation may be inaccurate
    • less stability (due to reliance on Terraform's own internal packages)

Snippet to enable the language server:

require'lspconfig'.terraformls.setup{}

Default values:

  • cmd :
{ "terraform-ls", "serve" }
  • filetypes :
{ "terraform" }
  • root_dir :
root_pattern(".terraform", ".git")

texlab

https://github.com/latex-lsp/texlab

A completion engine built from scratch for (La)TeX.

See https://github.com/latex-lsp/texlab/blob/master/docs/options.md for configuration options.

Snippet to enable the language server:

require'lspconfig'.texlab.setup{}

Commands:

  • TexlabBuild: Build the current buffer
  • TexlabForward: Forward search from current position

Default values:

  • cmd :
{ "texlab" }
  • filetypes :
{ "tex", "plaintex", "bib" }
  • root_dir :
see source file
  • settings :
{
  texlab = {
    auxDirectory = ".",
    bibtexFormatter = "texlab",
    build = {
      args = { "-pdf", "-interaction=nonstopmode", "-synctex=1", "%f" },
      executable = "latexmk",
      forwardSearchAfter = false,
      onSave = false
    },
    chktex = {
      onEdit = false,
      onOpenAndSave = false
    },
    diagnosticsDelay = 300,
    formatterLineLength = 80,
    forwardSearch = {
      args = {}
    },
    latexFormatter = "latexindent",
    latexindent = {
      modifyLineBreaks = false
    }
  }
}
  • single_file_support :
true

tflint

https://github.com/terraform-linters/tflint

A pluggable Terraform linter that can act as lsp server. Installation instructions can be found in https://github.com/terraform-linters/tflint#installation.

Snippet to enable the language server:

require'lspconfig'.tflint.setup{}

Default values:

  • cmd :
{ "tflint", "--langserver" }
  • filetypes :
{ "terraform" }
  • root_dir :
root_pattern(".terraform", ".git", ".tflint.hcl")

theme_check

https://github.com/Shopify/shopify-cli

theme-check-language-server is bundled with shopify-cli or it can also be installed via

https://github.com/Shopify/theme-check#installation

NOTE: If installed via Homebrew, cmd must be set to 'theme-check-liquid-server'

require lspconfig.theme_check.setup {
  cmd = { 'theme-check-liquid-server' }
}

Snippet to enable the language server:

require'lspconfig'.theme_check.setup{}

Default values:

  • cmd :
{ "theme-check-language-server", "--stdio" }
  • filetypes :
{ "liquid" }
  • root_dir :
see source file
  • settings :
{}

tilt_ls

https://github.com/tilt-dev/tilt

Tilt language server.

You might need to add filetype detection manually:

autocmd BufRead Tiltfile setf=tiltfile

Snippet to enable the language server:

require'lspconfig'.tilt_ls.setup{}

Default values:

  • cmd :
{ "tilt", "lsp", "start" }
  • filetypes :
{ "tiltfile" }
  • root_dir :
root_pattern(".git")
  • single_file_support :
true

tsserver

https://github.com/theia-ide/typescript-language-server

typescript-language-server depends on typescript. Both packages can be installed via npm:

npm install -g typescript typescript-language-server

To configure typescript language server, add a tsconfig.json or jsconfig.json to the root of your project.

Here's an example that disables type checking in JavaScript files.

{
  "compilerOptions": {
    "module": "commonjs",
    "target": "es6",
    "checkJs": false
  },
  "exclude": [
    "node_modules"
  ]
}

Snippet to enable the language server:

require'lspconfig'.tsserver.setup{}

Default values:

  • cmd :
{ "typescript-language-server", "--stdio" }
  • filetypes :
{ "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" }
  • init_options :
{
  hostInfo = "neovim"
}
  • root_dir :
root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git")

typeprof

https://github.com/ruby/typeprof

typeprof is the built-in analysis and LSP tool for Ruby 3.1+.

Snippet to enable the language server:

require'lspconfig'.typeprof.setup{}

Default values:

  • cmd :
{ "typeprof", "--lsp", "--stdio" }
  • filetypes :
{ "ruby", "eruby" }
  • root_dir :
root_pattern("Gemfile", ".git")

vala_ls

https://github.com/Prince781/vala-language-server

Snippet to enable the language server:

require'lspconfig'.vala_ls.setup{}

Default values:

  • cmd :
{ "vala-language-server" }
  • filetypes :
{ "vala", "genie" }
  • root_dir :
root_pattern("meson.build", ".git")
  • single_file_support :
true

vdmj

https://github.com/nickbattle/vdmj

The VDMJ language server can be installed by cloning the VDMJ repository and running mvn clean install.

Various options are provided to configure the language server (see below). In particular:

  • annotation_paths is a list of folders and/or jar file paths for annotations that should be used with the language server;
  • any value of debugger_port less than zero will disable the debugger; note that if a non-zero value is used, only one instance of the server can be active at a time.

More settings for VDMJ can be changed in a file called vdmj.properties under root_dir/.vscode. For a description of the available settings, see Section 7 of the VDMJ User Guide.

Note: proof obligations and combinatorial testing are not currently supported by neovim.

Snippet to enable the language server:

require'lspconfig'.vdmj.setup{}

Default values:

  • cmd :
Generated from the options given
  • filetypes :
{ "vdmsl", "vdmpp", "vdmrt" }
  • options :
{
  annotation_paths = {},
  debugger_port = -1,
  high_precision = false,
  java = "$JAVA_HOME/bin/java",
  java_opts = { "-Xmx3000m", "-Xss1m" },
  logfile = "path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log')",
  mavenrepo = "$HOME/.m2/repository/com/fujitsu",
  version = "The latest version installed in `mavenrepo`"
}
  • root_dir :
util.find_git_ancestor(fname) or find_vscode_ancestor(fname)

verible

https://github.com/chipsalliance/verible

A linter and formatter for verilog and SystemVerilog files.

Release binaries can be downloaded from here and placed in a directory on PATH.

See https://github.com/chipsalliance/verible/tree/master/verilog/tools/ls/README.md for options.

Snippet to enable the language server:

require'lspconfig'.verible.setup{}

Default values:

  • cmd :
{ "verible-verilog-ls" }
  • filetypes :
{ "systemverilog", "verilog" }
  • root_dir :
see source file

vimls

https://github.com/iamcco/vim-language-server

You can install vim-language-server via npm:

npm install -g vim-language-server

Snippet to enable the language server:

require'lspconfig'.vimls.setup{}

Default values:

  • cmd :
{ "vim-language-server", "--stdio" }
  • filetypes :
{ "vim" }
  • init_options :
{
  diagnostic = {
    enable = true
  },
  indexes = {
    count = 3,
    gap = 100,
    projectRootPatterns = { "runtime", "nvim", ".git", "autoload", "plugin" },
    runtimepath = true
  },
  isNeovim = true,
  iskeyword = "@,48-57,_,192-255,-#",
  runtimepath = "",
  suggest = {
    fromRuntimepath = true,
    fromVimruntime = true
  },
  vimruntime = ""
}
  • root_dir :
see source file
  • single_file_support :
true

visualforce_ls

https://github.com/forcedotcom/salesforcedx-vscode

Language server for Visualforce.

For manual installation, download the .vsix archive file from the forcedotcom/salesforcedx-vscode GitHub releases. Then, configure cmd to run the Node script at the unpacked location:

require'lspconfig'.visualforce_ls.setup {
  cmd = {
    'node',
    '/path/to/unpacked/archive/extension/node_modules/@salesforce/salesforcedx-visualforce-language-server/out/src/visualforceServer.js',
    '--stdio'
  }
}

Snippet to enable the language server:

require'lspconfig'.visualforce_ls.setup{}

Default values:

  • filetypes :
{ "visualforce" }
  • init_options :
{
  embeddedLanguages = {
    css = true,
    javascript = true
  }
}
  • root_dir :
root_pattern('sfdx-project.json')

vls

https://github.com/vlang/vls

V language server.

v-language-server can be installed by following the instructions here.




**Snippet to enable the language server:**
```lua
require'lspconfig'.vls.setup{}

Default values:

  • cmd :
{ "vls" }
  • filetypes :
{ "vlang" }
  • root_dir :
root_pattern("v.mod", ".git")

volar

https://github.com/johnsoncodehk/volar/tree/master/packages/vue-language-server

Volar language server for Vue

Volar can be installed via npm:

npm install -g @volar/vue-language-server

Volar by default supports Vue 3 projects. Vue 2 projects need additional configuration.

Take Over Mode

Volar can serve as a language server for both Vue and TypeScript via Take Over Mode.

To enable Take Over Mode, override the default filetypes in setup{} as follows:

require'lspconfig'.volar.setup{
  filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'}
}

Overriding the default TypeScript Server used by Volar

The default config looks for TS in the local node_modules. This can lead to issues e.g. when working on a monorepo. The alternatives are:

  • use a global TypeScript Server installation
require'lspconfig'.volar.setup{
  init_options = {
    typescript = {
      serverPath = '/path/to/.npm/lib/node_modules/typescript/lib/tsserverlib.js'
      -- Alternative location if installed as root:
      -- serverPath = '/usr/local/lib/node_modules/typescript/lib/tsserverlibrary.js'
    }
  }
}
  • use a local server and fall back to a global TypeScript Server installation
local util = require 'lspconfig.util'
local function get_typescript_server_path(root_dir)

  local global_ts = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib/tsserverlibrary.js'
  -- Alternative location if installed as root:
  -- local global_ts = '/usr/local/lib/node_modules/typescript/lib/tsserverlibrary.js'
  local found_ts = ''
  local function check_dir(path)
    found_ts =  util.path.join(path, 'node_modules', 'typescript', 'lib', 'tsserverlibrary.js')
    if util.path.exists(found_ts) then
      return path
    end
  end
  if util.search_ancestors(root_dir, check_dir) then
    return found_ts
  else
    return global_ts
  end
end

require'lspconfig'.volar.setup{
  on_new_config = function(new_config, new_root_dir)
    new_config.init_options.typescript.serverPath = get_typescript_server_path(new_root_dir)
  end,
}

Snippet to enable the language server:

require'lspconfig'.volar.setup{}

Default values:

  • cmd :
{ "vue-language-server", "--stdio" }
  • filetypes :
{ "vue" }
  • init_options :
{
  documentFeatures = {
    documentColor = false,
    documentFormatting = {
      defaultPrintWidth = 100
    },
    documentSymbol = true,
    foldingRange = true,
    linkedEditingRange = true,
    selectionRange = true
  },
  languageFeatures = {
    callHierarchy = true,
    codeAction = true,
    codeLens = true,
    completion = {
      defaultAttrNameCase = "kebabCase",
      defaultTagNameCase = "both"
    },
    definition = true,
    diagnostics = true,
    documentHighlight = true,
    documentLink = true,
    hover = true,
    implementation = true,
    references = true,
    rename = true,
    renameFileRefactoring = true,
    schemaRequestService = true,
    semanticTokens = false,
    signatureHelp = true,
    typeDefinition = true
  },
  typescript = {
    serverPath = ""
  }
}
  • on_new_config :
see source file
  • root_dir :
see source file

vuels

https://github.com/vuejs/vetur/tree/master/server

Vue language server(vls) vue-language-server can be installed via npm:

npm install -g vls

Snippet to enable the language server:

require'lspconfig'.vuels.setup{}

Default values:

  • cmd :
{ "vls" }
  • filetypes :
{ "vue" }
  • init_options :
{
  config = {
    css = {},
    emmet = {},
    html = {
      suggest = {}
    },
    javascript = {
      format = {}
    },
    stylusSupremacy = {},
    typescript = {
      format = {}
    },
    vetur = {
      completion = {
        autoImport = false,
        tagCasing = "kebab",
        useScaffoldSnippets = false
      },
      format = {
        defaultFormatter = {
          js = "none",
          ts = "none"
        },
        defaultFormatterOptions = {},
        scriptInitialIndent = false,
        styleInitialIndent = false
      },
      useWorkspaceDependencies = false,
      validation = {
        script = true,
        style = true,
        template = true
      }
    }
  }
}
  • root_dir :
root_pattern("package.json", "vue.config.js")

wgsl_analyzer

https://github.com/wgsl-analyzer/wgsl-analyzer

wgsl_analyzer can be installed via cargo:

cargo install --git https://github.com/wgsl-analyzer/wgsl-analyzer wgsl_analyzer

Snippet to enable the language server:

require'lspconfig'.wgsl_analyzer.setup{}

Default values:

  • cmd :
{ "wgsl_analyzer" }
  • filetypes :
{ "wgsl" }
  • root_dir :
root_pattern(".git"
  • settings :
{}

yamlls

https://github.com/redhat-developer/yaml-language-server

yaml-language-server can be installed via yarn:

yarn global add yaml-language-server

To use a schema for validation, there are two options:

  1. Add a modeline to the file. A modeline is a comment of the form:
# yaml-language-server: $schema=<urlToTheSchema|relativeFilePath|absoluteFilePath}>

where the relative filepath is the path relative to the open yaml file, and the absolute filepath is the filepath relative to the filesystem root ('/' on unix systems)

  1. Associated a schema url, relative , or absolute (to root of project, not to filesystem root) path to the a glob pattern relative to the detected project root. Check :LspInfo to determine the resolved project root.
require('lspconfig').yamlls.setup {
  ... -- other configuration for setup {}
  settings = {
    yaml = {
      ... -- other settings. note this overrides the lspconfig defaults.
      schemas = {
        ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*"
        ["../path/relative/to/file.yml"] = "/.github/workflows/*"
        ["/path/from/root/of/project"] = "/.github/workflows/*"
      },
    },
  }
}

Currently, kubernetes is special-cased in yammls, see the following upstream issues:

To override a schema to use a specific k8s schema version (for example, to use 1.18):

require('lspconfig').yamlls.setup {
  ... -- other configuration for setup {}
  settings = {
    yaml = {
      ... -- other settings. note this overrides the lspconfig defaults.
      schemas = {
        ["https://raw.githubusercontent.com/instrumenta/kubernetes-json-schema/master/v1.18.0-standalone-strict/all.json"] = "/*.k8s.yaml",
        ... -- other schemas
      },
    },
  }
}

Snippet to enable the language server:

require'lspconfig'.yamlls.setup{}

Default values:

  • cmd :
{ "yaml-language-server", "--stdio" }
  • filetypes :
{ "yaml", "yaml.docker-compose" }
  • root_dir :
util.find_git_ancestor
  • settings :
{
  redhat = {
    telemetry = {
      enabled = false
    }
  }
}
  • single_file_support :
true

zk

https://github.com/mickael-menu/zk

A plain text note-taking assistant

Snippet to enable the language server:

require'lspconfig'.zk.setup{}

Commands:

  • ZkIndex: Index
  • ZkNew: ZkNew

Default values:

  • cmd :
{ "zk", "lsp" }
  • filetypes :
{ "markdown" }
  • root_dir :
root_pattern(".zk")

zls

https://github.com/zigtools/zls

Zig LSP implementation + Zig Language Server

Snippet to enable the language server:

require'lspconfig'.zls.setup{}

Default values:

  • cmd :
{ "zls" }
  • filetypes :
{ "zig", "zir" }
  • root_dir :
util.root_pattern("zls.json", ".git")
  • single_file_support :
true

vim:ft=markdown