diff --git a/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.2mm_visual.inst.cfg
new file mode 100644
index 00000000000..6a81905545a
--- /dev/null
+++ b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.2mm_visual.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = ultimaker_sketch_sprint
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 24
+type = intent
+variant = 0.4mm
+
+[values]
+acceleration_roofing = 1500
+acceleration_wall_0_roofing = 1500
+acceleration_wall_x_roofing = 1500
+cool_min_temperature = 220.0
+hole_xy_offset = 0.2
+hole_xy_offset_max_diameter = 3
+inset_direction = inside_out
+line_width = 0.4
+material_final_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature = 220
+min_bead_width = 0.34
+min_wall_line_width = 0.34
+roofing_line_width = 0.35
+roofing_monotonic = False
+roofing_pattern = lines
+skin_monotonic = False
+skin_outline_count = 0
+skin_overlap = 25
+small_feature_max_length = 25
+small_feature_speed_factor = 40
+small_hole_max_size = 4.5
+small_skin_width = 4
+speed_roofing = 100
+wall_line_width_x = 0.4
+z_seam_type = back
+
diff --git a/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.2mm_visual.inst.cfg
new file mode 100644
index 00000000000..1635985b89f
--- /dev/null
+++ b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.2mm_visual.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = ultimaker_sketch_sprint
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 24
+type = intent
+variant = 0.4mm
+
+[values]
+acceleration_roofing = 1500
+acceleration_wall_0_roofing = 1500
+acceleration_wall_x_roofing = 1500
+cool_min_temperature = 220.0
+hole_xy_offset = 0.2
+hole_xy_offset_max_diameter = 3
+inset_direction = inside_out
+line_width = 0.4
+material_final_print_temperature = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature = 220
+min_bead_width = 0.34
+min_wall_line_width = 0.34
+roofing_line_width = 0.35
+roofing_monotonic = False
+roofing_pattern = lines
+skin_monotonic = False
+skin_outline_count = 0
+skin_overlap = 25
+small_feature_max_length = 25
+small_feature_speed_factor = 40
+small_hole_max_size = 4.5
+small_skin_width = 4
+speed_roofing = 100
+wall_line_width_x = 0.4
+z_seam_type = back
+