Turn a Windows-PC into a touchscreen using only $1.0 of hardware. The proof-of-concept, dubbed “Project Sistine” after our recreation of the famous painting in the Sistine Chapel, was prototyped by Anish Athalye, Kevin Kwok, Guillermo Webster, and Logan Engstrom in about 16 hours. It was thus mordified by Ashish Gupta to work from mac/linux to windows.
The basic principle behind Sistine is simple. Surfaces viewed from an angle tend to look shiny, and you can tell if a finger is touching the surface by checking if it’s touching its own reflection.
Kevin, back in middle school, noticed this phenomenon and built ShinyTouch, utilizing an external webcam to build a touch input system requiring virtually no setup. We wanted to see if we could miniaturize the idea and make it work without an external webcam. Our idea was to retrofit a small mirror in front of a MacBook’s built-in webcam, so that the webcam would be looking down at the computer screen at a sharp angle. The camera would be able to see fingers hovering over or touching the screen, and we’d be able to translate the video feed into touch events using computer vision.
(Read the rest of our blog post, including a video demo and a high-level explanation of the algorithm, (https://www.anishathalye.com/2018/04/03/macbook-touchscreen/)
Download Python 3 and then pip.
-
Install Python 3 via webisite https://www.python.org/download/releases/3.0/
-
Download and Install pip. Follow this video : https://www.youtube.com/watch?v=AVCcFyYynQY
-
Install OpenCV 3 via pip with
pip install opencv-python -
Install pyautogui via pip with
pip install pyautogui -
Install Numpy via pip with
pip install numpy
Run python WindowsTouch.py via cmd or compile using python3. Don't forget to add python 3 to path.
Python 2 is supported.