browser-bookmarks.nvim

A Neovim plugin to open your browser bookmarks right from the editor!

Using `vim.ui.select` and `telescope-ui-select.nvim`:

Using `vim.ui.select` and `fzf-lua`:

Using telescope integration:

Supported browsers

Browser	MacOS	Linux	Windows
Arc	☑️	-	-
Brave	☑️	☑️	☑️
Brave Beta	☑️	☑️	☑️
Chromium	☑️	☑️	☑️
Google Chrome	☑️	☑️	☑️
Google Chrome Beta	☑️	☑️	☑️
Microsoft Edge	☑️	☑️	☑️
Firefox	☑️	☑️	☑️
qutebrowser	☑️	☑️	☑️
Safari ¹	☑️	-	-
Vivaldi	☑️	☑️	☑️
Waterfox	☑️	☑️	☑️

Supported tools

buku - bookmark manager
Raindrop.io ² - All-in-one bookmark manager

Refer to the Raindrop section for more info.

Requirements

Neovim >= 0.7
sqlite.lua (only for Firefox, Waterfox browser and buku)
telescope.nvim (only for telescope integration)

Installation

The project follows semantic versioning, so it's recommended to specify the tag when installing. The latest released version can be found here.

The plugin managers mentioned below supports wildcard (*) in the tag key which points to the latest git tag. You can specify a specific version if you'd prefer to inspect the changes before updating.

Using lazy.nvim

{
  'dhruvmanila/browser-bookmarks.nvim',
  version = '*',
  -- Only required to override the default options
  opts = {
    -- Override default configuration values
    -- selected_browser = 'chrome'
  },
  -- dependencies = {
  --   -- Only if your selected browser is Firefox, Waterfox or buku
  --   'kkharji/sqlite.lua',
  --
  --   -- Only if you're using the Telescope extension
  --   'nvim-telescope/telescope.nvim',
  -- }
}

Using packer.nvim

use {
  'dhruvmanila/browser-bookmarks.nvim',
  tag = '*',
  -- requires = {
  --   -- Only if your selected browser is Firefox, Waterfox or buku
  --   'kkharji/sqlite.lua',
  --
  --   -- Only if you're using the Telescope extension
  --   'nvim-telescope/telescope.nvim',
  -- }
}

Using vim-plug

Plug 'dhruvmanila/browser-bookmarks.nvim', { 'tag': '*' }
" Only if your selected browser is Firefox, Waterfox or buku
" Plug 'kkharji/sqlite.lua'

" Only if you're using the Telescope extension
" Plug 'nvim-telescope/telescope.nvim'

Setup

Note: Setup function is only required to be invoked to override the default configuration values. Otherwise, the setup is done automatically to use the default configuration values and define the BrowserBookmarks command.

require('browser_bookmarks').setup({
  -- override default configuration values
  selected_browser = 'firefox',
})

Usage

The command BrowserBookmarks is defined through which the plugin can be invoked. This uses the vim.ui.select interface to select a bookmark and open it in the default browser.

The command accepts an optional argument which would be the browser name. If not provided, the plugin will use the default browser or the configured one during the plugin setup.

-- No argument, uses the default browser
BrowserBookmarks

-- Uses the Safari browser
BrowserBookmarks safari

-- Autocomplete is available
BrowserBookmarks <TAB>

The browser name is the same as the one accepted by the selected_browser config option. Refer to the config section.

When you press Enter on a selected bookmark, it will open the URL using either the url_open_plugin or url_open_command option in your default browser.

The keymap can be defined to invoke the fuzzy finder through the command or API function like so:

vim.keymap.set('n', '<leader>fb', require('browser_bookmarks').select, {
  desc = 'Fuzzy search browser bookmarks',
})

Raindrop

For users of Raindrop.io, as the bookmarks are stored in the cloud and an API is used to fetch the bookmarks, two workflows were designed to accomodate the process.

Token initialization

The API requires a token for authentication. Now, a token cannot be stored in the user config as that would risk in making it public through an individual's dotfiles. So, the plugin will ask for the token when invoked for the first time and store it locally in a file at the following path:

vim.fn.stdpath('data') .. '/.raindrop-token'

The token value can be updated using the following API:

require('browser_bookmarks.browsers.raindrop').update_token("new-token")

Once the token is initialized, the same will be used for every command invocation.

Background job

Invoking the command post token initialization will trigger a background job to collect the bookmarks and cache it. Further invocation of the command will use the cached bookmarks. The cache can be cleared using the following API:

require('browser_bookmarks.browsers.raindrop').clear_cache()

API

Additionally, the plugin exposes a simple API:

---@class Bookmark
---@field name string Bookmark name
---@field path string Full path from root to the name separated by '/'
---@field url string Bookmark URL
---@field tags? string Comma separated tags (only for buku)

-- Collect all the bookmarks for either the given browser or the selected
-- browser in the config table.
--
-- An error will be raised if the selected browser is unsupported.
-- A warning notification will be sent using `vim.notify` if there's any
-- kind of problem while collecting the bookmarks.
--
---@param selected_browser? Browser
---@return Bookmark[]?
function M.collect(selected_browser) end

-- Select a bookmark using `vim.ui.select` and open it in the default browser.
--
-- If the `selected_browser` parameter is not given, the value is taken from
-- the config table. The `kind` option value in `vim.ui.select` is
-- "browser-bookmarks".
--
-- Error / warning is given in the same way as the `collect` function.
--
---@param selected_browser? Browser
function M.select(selected_browser) end

The command BrowserBookmarks uses the select API function.

Example usage for the API:

local Browser = require("browser_bookmarks.enum").Browser
local browser_bookmarks = require("browser_bookmarks")

browser_bookmarks.collect(Browser.BRAVE)
-- {
--   {
--     name = "GitHub",
--     path = "GitHub",
--     url = "https://github.com/"
--   },
--   {
--     name = "Google",
--     path = "search/Google",
--     url = "https://www.google.com/"
--   },
--   {
--     name = "DuckDuckGo",
--     path = "search/nested/DuckDuckGo",
--     url = "https://duckduckgo.com/"
--   }
-- }

Telescope Extension

To get started, simply load the extension:

require('telescope').load_extension('bookmarks')

To override the default values, use the setup guide.

You can open the picker either from the command-line or calling the lua function:

" From the command-line
Telescope bookmarks

" Using lua function
lua require('telescope').extensions.bookmarks.bookmarks(telescope_opts)

Telescope can lazily load the extension when needed, but that can only be called using the lua function. The command-line argument will not work as the extension is not yet loaded.

Multiple bookmarks can be opened at the same time using multi selections feature in Telescope.

Configuration

`selected_browser`

string, default: "brave"

The selected browser to collect the bookmarks from. An error is raised if the provided browser name is unsupported. The list of supported browser along with the config value is as follows:

Browser / Tool	Config value
Arc	`arc`
buku	`buku`
Brave	`brave`
Brave Beta	`brave_beta`
Google Chrome	`chrome`
Google Chrome Beta	`chrome_beta`
Chromium	`chromium`
Microsoft Edge	`edge`
Firefox	`firefox`
qutebrowser	`qutebrowser`
Raindrop.io	`raindrop`
Safari	`safari`
Vivaldi	`vivaldi`
Waterfox	`waterfox`

`profile_name`

string, default: nil

This option is only applicable for the browsers which allow switching between profiles and the plugin supports it. The default profile will be used if the value is nil otherwise the plugin will try to collect the bookmarks for the given profile.

If the given profile does not exist or the plugin is unable to get the profile related information, an appropriate warning message will be provided.

Following browsers are supported for the config option:

Arc
Brave
Brave Beta
Google Chrome
Google Chrome Beta
Chromium
Microsoft Edge
Firefox
Vivaldi
Waterfox

The config option is ignored for all the non-supported browsers.

`config_dir`

string, default: nil

This is the absolute path to the config directory where the selected browser's data is stored on the respective operating system. If nil, the default path will be used as specified in the table below. It can be used as a reference in determining the custom path.

Browser	MacOS	Linux	Windows
Arc	`~/Library/Application Support/Arc/User Data`	-	-
Brave	`~/Library/Application Support/BraveSoftware/Brave-Browser`	`~/.config/BraveSoftware/Brave-Browser`	`~/AppData/Local/BraveSoftware/Brave-Browser/User Data`
Brave Beta	`~/Library/Application Support/BraveSoftware/Brave-Browser-Beta`	`~/.config/BraveSoftware/Brave-Browser-Beta`	`~/AppData/Local/BraveSoftware/Brave-Browser-Beta/User Data`
Google Chrome	`~/Library/Application Support/Google/Chrome`	`~/.config/google-chrome`	`~/AppData/Local/Google/Chrome/User Data`
Google Chrome Beta	`~/Library/Application Support/Google/Chrome Beta`	`~/.config/google-chrome-beta`	`~/AppData/Local/Google/Chrome Beta/User Data`
Chromium	`~/Library/Application Support/Chromium`	`~/.config/chromium`	`~/AppData/Local/Chromium/User Data`
Microsoft Edge	`~/Library/Application Support/Microsoft Edge`	`~/.config/microsoft-edge`	`~/AppData/Local/Microsoft/Edge/User Data`
Firefox	`~/Library/Application Support/Firefox`	`~/.mozilla/firefox`	`~/AppData/Roaming/Mozilla/Firefox`
qutebrowser	`~/.qutebrowser`	`~/.config/qutebrowser`	`~/AppData/Roaming/qutebrowser/config`
Safari	`~/Library/Safari`	-	-
Vivaldi	`~/Library/Application Support/Vivaldi`	`~/.config/vivaldi`	`~/AppData/Local/Vivaldi/User Data`
Waterfox	`~/Library/Application Support/Waterfox`	`~/.waterfox`	`~/AppData/Roaming/Waterfox`

The structure of the directory is dependent on the browser. This is used to find either the bookmarks file or other config files specific to the browser. If the user provided a custom path, the structure inside that directory should match with the default config directory. If there's some kind of mismatch, a warning will be provided.

This option helps in case the browser was installed using a non-default install method. For example, a browser might be installed using a package manager and the data is stored in a directory specific to that package manager.

Note: For buku, this option doesn't apply as it has a custom logic to get the bookmarks filepath. This logic is same as that in the official implementation.

`full_path`

boolean, default: true

By default, the entire path to the bookmark is shown starting from the root folder upto the bookmark name. If this is false, then only the bookmark name will be shown in the finder. For example, if the bookmark path is foo/bar/name, setting the config value to false would show only the name part.

`url_open_command`

string, default: "open"

The command name used to open the selected bookmarks in the default browser. The default value is based on macOS and should be overriden based on the user's operating system. For example, on Linux one might use xdg-open.

The URL(s) for the selected bookmarks are passed as arguments to the command after quoting them. For multiple selections, each URL is passed as a separate argument separated by a space.

<command> "url1" "url2"

A warning is raised if the provided command failed to open the URL(s). This is determined by its exit code where a non-zero exit code is assumed to be a failure.

`url_open_plugin`

string, default: nil

The plugin can use any existing plugin to open the selected bookmarks. This is useful when the same config is used across machines with different operating system. If this option is provided, then it takes precedence over url_open_command.

Following plugins are supported along with the config value:

open-browser.vim - open_browser
vim-external - external_browser

`buku_include_tags`

boolean, default: false

This config option is specific to the buku bookmark manager. If it's true, the tags for every bookmark is added.

For telescope integration, an additional column is added which includes the tags for every bookmark. This column is highlighted using the Special highlight group.

`debug`

boolean, default: false

If true, provide debug messages which includes, but not limited to, the config options, state values, telescope options, etc.

Tips

Using kind option to customize vim.ui.select implementer:

The kind value for vim.ui.select is browser-bookmarks which could be used to customize the chosen implementation. For example, using telescope-ui-select.nvim:

Screenshot configuration

require('telescope').setup {
  extensions = {
    ['ui-select'] = {
      require('telescope.themes').get_dropdown {
        layout_config = {
          width = 0.8,
          height = 0.8,
        }
      },
      specific_opts = {
        ['browser-bookmarks'] = {
          make_displayer = function()
            return entry_display.create {
              separator = ' ',
              items = {
                { width = 0.5 },
                { remaining = true },
              },
              -- Use this instead if `buku_include_tags` is true:
              -- items = {
              --   { width = 0.3 },
              --   { width = 0.2 },
              --   { remaining = true },
              -- },
            }
          end,
          make_display = function(displayer)
            return function(entry)
              return displayer {
                entry.value.text.name,
                -- Uncomment if `buku_include_tags` is true:
                -- { entry.value.text.tags, 'Special' },
                { entry.value.text.url, 'Comment' },
              }
            end
          end,
        },
      },
    },
  },
}

Contributing

Contributions are always welcome and highly appreciated. Refer to the Contributing Guidelines.

Videos

5 Terrific Neovim Telescope Extensions for 2022 🔭

References

Browsing Chrome bookmarks with fzf
Code: plist parser

Footnotes

The application which is used to run neovim should be allowed full disk access as the bookmarks file (~/Library/Safari/Bookmarks.plist) is in a restricted directory. This can be done in System Preferences > Security & Privacy > Full Disk Access and then click on the checkbox next to your preferred application. ↩
The Raindrop API requires an access token to fetch the bookmarks. To get the token, go to App Management Console and open your application settings. Copy the Test token and add it when asked for. ↩

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

browser-bookmarks.nvim

Using `vim.ui.select` and `telescope-ui-select.nvim`:

Using `vim.ui.select` and `fzf-lua`:

Using telescope integration:

Supported browsers

Supported tools

Requirements

Installation

Using lazy.nvim

Using packer.nvim

Using vim-plug

Setup

Usage

Raindrop

Token initialization

Background job

API

Telescope Extension

Configuration

`selected_browser`

`profile_name`

`config_dir`

`full_path`

`url_open_command`

`url_open_plugin`

`buku_include_tags`

`debug`

Tips

Using kind option to customize vim.ui.select implementer:

Contributing

Videos

References

Files

README.md

Latest commit

History

README.md

File metadata and controls

browser-bookmarks.nvim

Using vim.ui.select and telescope-ui-select.nvim:

Using vim.ui.select and fzf-lua:

Using telescope integration:

Supported browsers

Supported tools

Requirements

Installation

Using lazy.nvim

Using packer.nvim

Using vim-plug

Setup

Usage

Raindrop

Token initialization

Background job

API

Telescope Extension

Configuration

selected_browser

profile_name

config_dir

full_path

url_open_command

url_open_plugin

buku_include_tags

debug

Tips

Using kind option to customize vim.ui.select implementer:

Contributing

Videos

References

Footnotes

Using `vim.ui.select` and `telescope-ui-select.nvim`:

Using `vim.ui.select` and `fzf-lua`:

`selected_browser`

`profile_name`

`config_dir`

`full_path`

`url_open_command`

`url_open_plugin`

`buku_include_tags`

`debug`