Skip to content

Latest commit

 

History

History
55 lines (44 loc) · 1.38 KB

README.md

File metadata and controls

55 lines (44 loc) · 1.38 KB
Raw

Linux driver and daemon for Thermaltake Riing

Compatibility

currently supported devices are (as they show up in thermaltakes TTRGBPLUS software: Riing Plus Flow Riing RGB If your's isnt listed, please create an issue and I'll implement it ASAP!!

Installation

Pypi

The setup file will create the systemd user unit, and udev rule sudo pip install linux-thermaltake-rgb

then add your user to the plugdev group - sudo usermod -a -G plugdev <user>

then reconnect your device. (you may need to log out and back in so your user is recognised as being in the plugdev group

Configuration

default configuration is in /etc/linux_thermaltake_rgb/config.yml edit and configure suitably.

example config:

# specify <port_number>:<device_type>
# port number, referring to the usb hub controller your fans connect too.
devices:
  1: Riing Plus
  2: Riing Plus
  3: Riing Plus
  4: Riing Plus
  5: Floe Riing RGB

# these are passed directly into the fan controller factory method in `daemon.fan_manager`
# and as such, are just kwargs.
fan_controller:
  type: temp_target
  target: 20
  sensor_name: k10temp
  multiplier: 5

# alternatively, you can set a permanent speed
# fan_controller:
#   type: locked_speed
#   speed: 80

# same as fan_controller, these are kwargs passed into the lighting_manager factory method.
lighting_controller:
  type: static
  r: 50
  g: 0
  b: 0