cut

Author: Samuel Huron

How-to-cut-with-the-Laser-Cutter-OpenLab.md

@@ -0,0 +1,22 @@
+# LaserCutter L'OpenLab
+
+## How to cut something 
+
+* 1 Put the exhaust at the window
+* 2 switch on the filter
+* 3 switch on the compressor
+* 4 switch on the laser cutter 
+* 5 go to the computer (if login = "lopenlab")
+* 6 to cut put the stroke width "<0.1"
+* 7 click on print ("ctrl+p")
+* 8 click on preferences 
+* 9 choose "avancée" select the good parameters according to the material
+* 10 Calibrate with 0% power.
+* 10 if ok, print 
+* 11 click the green button on the laser cuter to print 
+
+## When you have finish 
+
+* 1 clean the laser lens (4: 2 top, 2 bottom)
+* 2 vacuum the material residue
+* 3 switch off the compressor, the laser cutter and the compressor, and filter