[working] Pico-LoRa-SX1262-868M with TTN

[HilmarSt]

thank you for this great library!

here's the module I've tested:
https://www.waveshare.com/wiki/Pico-LoRa-SX1262-868M

...and here's some output:

Setup ... 
[Radio] Initializing ... 
RLB_DBG: 
RadioLib Info
Version:  "7.1.2.0"
Platform: "Raspberry Pi Pico (unofficial)"
RLB_DBG: Found SX126x: RADIOLIB_SX126X_REG_VERSION_STRING:
RLB_DBG: 00000320: 53 58 31 32 36 31 20 56 32 44 20 32 44 30 32 00  SX1261 V2D 2D02.
RLB_DBG: 
RLB_DBG: M	SX126x
success!
Join ('login') the LoRaWAN Network
RLB_PRO: Setting up dynamic channels
RLB_PRO: UL:   0 1 868.100 (0 - 5) | DL:   0 1 868.100 (0 - 5)
RLB_PRO: UL:   1 1 868.300 (0 - 5) | DL:   1 1 868.300 (0 - 5)
RLB_PRO: UL:   2 1 868.500 (0 - 5) | DL:   2 1 868.500 (0 - 5)
RLB_PRO: [MAC] 0x03
RLB_PRO: 00000000: 30                                               0                 
RLB_PRO: LinkAdrReq: dataRate = 3, txSteps = 0, nbTrans = 0
RLB_PRO: LinkAdrAns: 07
RLB_PRO: [MAC] 0x04
RLB_PRO: 00000000: 07                                               .                 
RLB_PRO: DutyCycleReq: max duty cycle = 1/2^7
RLB_PRO: [MAC] 0x05
RLB_PRO: 00000000: 00 d2 ad 84                                      ....              
RLB_PRO: RXParamSetupReq: Rx1DrOffset = 0, rx2DataRate = 0, freq = 869.525
RLB_PRO: [MAC] 0x08
RLB_PRO: 00000000: 01                                               .                 
RLB_PRO: RXTimingSetupReq: delay = 1 sec
RLB_PRO: [MAC] 0x09
RLB_PRO: 00000000: 05                                               .                 
RLB_PRO: [MAC] 0x0c
RLB_PRO: 00000000: 65                                               e                 
RLB_PRO: ADRParamSetupReq: limitExp = 6, delayExp = 5
RLB_PRO: [MAC] 0x0f
RLB_PRO: 00000000: fa                                               .                 
RLB_PRO: RejoinParamSetupReq: maxTime = 15, maxCount = 10
RLB_PRO: 
RLB_PRO: PHY:  Frequency = 868.500 MHz, TX = 16 dBm
RLB_PRO: LoRa: SF = 9, BW = 125.0 kHz, CR = 4/5, IQ: U
RLB_DBG: Timeout in 1034 ms
RLB_PRO: JoinRequest sent (DevNonce = 0) <-- Rx Delay start
RLB_PRO: 00000000: 00 00 00 00 00 00 00 00 00 3f de 06 d0 7e d5 b3  .........?...~..
RLB_PRO: 00000010: 70 00 00 8d ab 83 d0                             p......           
RLB_PRO: 
RLB_PRO: PHY:  Frequency = 868.500 MHz, TX = 16 dBm
RLB_PRO: LoRa: SF = 9, BW = 125.0 kHz, CR = 4/5, IQ: D
RLB_PRO: Opening Rx1 window (128 ms timeout)... <-- Rx Delay end 
RLB_PRO: Closing Rx1 window
RLB_PRO: JoinAccept (JoinNonce = 3, previously 0):
RLB_PRO: 00000000: 20 03 00 00 13 00 00 1d 4e 0b 26 83 05 18 4f 84   .......N.&...O.
RLB_PRO: 00000010: e8 56 84 b8 5e 84 88 66 84 58 6e 84 00 56 8a 1e  .V..^..f.Xn..V..
RLB_PRO: 00000020: c0                                               .                 
RLB_PRO: LoRaWAN revision: 1.1
RLB_PRO: Setting up dynamic channels
RLB_PRO: UL:   0 1 868.100 (0 - 5) | DL:   0 1 868.100 (0 - 5)
RLB_PRO: UL:   1 1 868.300 (0 - 5) | DL:   1 1 868.300 (0 - 5)
RLB_PRO: UL:   2 1 868.500 (0 - 5) | DL:   2 1 868.500 (0 - 5)
RLB_PRO: [MAC] 0x05
RLB_PRO: 00000000: 03 d2 ad 84                                      ....              
RLB_PRO: RXParamSetupReq: Rx1DrOffset = 0, rx2DataRate = 3, freq = 869.525
RLB_PRO: [MAC] 0x08
RLB_PRO: 00000000: 05                                               .                 
RLB_PRO: RXTimingSetupReq: delay = 5 sec
RLB_PRO: Processing CFList
RLB_PRO: [MAC] 0x07
RLB_PRO: 00000000: 03 18 4f 84 50                                   ..O.P             
RLB_PRO: UL:   3 1 867.100 (0 - 5) | DL:   3 1 867.100 (0 - 5)
RLB_PRO: [MAC] 0x07
RLB_PRO: 00000000: 04 e8 56 84 50                                   ..V.P             
RLB_PRO: UL:   4 1 867.300 (0 - 5) | DL:   4 1 867.300 (0 - 5)
RLB_PRO: [MAC] 0x07
RLB_PRO: 00000000: 05 b8 5e 84 50                                   ..^.P             
RLB_PRO: UL:   5 1 867.500 (0 - 5) | DL:   5 1 867.500 (0 - 5)
RLB_PRO: [MAC] 0x07
RLB_PRO: 00000000: 06 88 66 84 50                                   ..f.P             
RLB_PRO: UL:   6 1 867.700 (0 - 5) | DL:   6 1 867.700 (0 - 5)
RLB_PRO: [MAC] 0x07
RLB_PRO: 00000000: 07 58 6e 84 50                                   .Xn.P             
RLB_PRO: UL:   7 1 867.900 (0 - 5) | DL:   7 1 867.900 (0 - 5)
Ready!

[HeadBoffin]

That's great. If you could include the code that would make it amazing and then others can benefit too!

[HilmarSt]

it's basically https://github.com/jgromes/RadioLib/blob/master/examples/LoRaWAN/LoRaWAN_Starter/LoRaWAN_Starter.ino with these lines added at the top:

#include <RadioLib.h>
// instead of defining RADIO_BOARD_AUTO, board can be specified manually
#define RADIO_BOARD_RASPBERRYPI_PICO
#include <RadioBoards.h> // this must be included AFTER RadioLib!
// create a new RadioLib module: "Radio" will be set to the correct module type, and "RadioModule" will have the correct pins
Radio radio = new RadioModule();

...and in setup() :
RadioBeginSPI(); // start SPI on the appropriate pins, this has to be called before radio.begin()!