Prime Edition MkII. Quick start

Jump to bottom

Linar Yusupov edited this page Jul 11, 2018 · 8 revisions

Download firmware binaries into your Prime Edition Mark II. Follow these instructions.
Move your PE MkII into an area of good GPS/GLONASS reception.
Connect your (Android) Tablet/Cellphone to SoftRF Wi-Fi Access Point.
SSID: SoftRF-XXXXXX
Key: 12345678
Open up a browser then proceed to this URL: http://192.168.1.1
A page like this should come up:

Open up Settings menu. Select NMEA UDP option. Press Save and restart button.

Install XCSoar app from Google Play.
Open the XCSoar app in Fly mode. Double tap the screen then select Config:

Select Devices:

Push Edit button then configure the device as follows:

Push Monitor button and see if your tablet/phone is receiving NMEA data from your Prime Edition Mark II:

Return all the way back to XCSoar main screen:

Swipe three times to the left to reach Radar View. When any other traffic ^{(OGN Tracker or another Prime MkII)} is around - you should see it on this screen: