Trigger and Data Acquisition codes for MAGIS-100 Distributed Imaging System (DIS)
These codes are supposed to run on a Raspberry Pi (RPi) with Spinnaker to configure and read the cameras and pigpio to switch power and trigger the cameras.
The standard set-up is:
- Hardware: Raspberry Pi 4B (8GB RAM)
- OS: 64-bit Raspberrian OS (Debian GNU/Linux 11, Bullseye)
- Software:
- Spinnaker SDK: 2.7.0.128-arm64
- pigpio: 2.52
These codes might run fine on a different set-up, but it is not guaranteed.