[Bug]: meshtastic exited with code 134

[habr05]

Category

Other

Hardware

Other

Firmware Version

2.3.13.83f5ba01

Description

I build the docker image using instructions from https://meshtastic.org/docs/software/linux-native/#usage-with-docker.
I can fire up the image using docker run --rm -p 4403:4403 meshtastic/device. But if I provide a (correctly formatted) config.yaml containing

Lora:
Module: sx1262 # Waveshare SX126X XXXM
DIO2_AS_RF_SWITCH: true
CS: 21
IRQ: 16
Busy: 20
Reset: 18

the container exits with the following:

Container meshtastic Created
Attaching to meshtastic
meshtastic | + ./meshtasticd -d /home/mesh/data
meshtastic | Portduino is starting, HWID=1, VFS root at /home/mesh/data
meshtastic | Setting up Meshtastic on Portduino...
meshtastic | Using /etc/meshtasticd/config.yaml as config file
meshtastic | meshtasticd: /home/mesh/.platformio/packages/framework-portduino/cores/portduino/linux/gpio/LinuxGPIOPin.cpp:226: gpiod_line* LinuxGPIOPin::getLine(const char*, int): Assertion `num_chips > 0' failed.
meshtastic | Aborted (core dumped)
meshtastic exited with code 134

Linux-native (meshtasticd_2.3.13.83f5ba0_arm64.deb) on the same hardware, with the above config.yaml, works without issues.

Relevant log output

Output from `docker run --rm -p 4403:4403 meshtastic/device`

Container meshtastic  Created                                                                                                                                               0.0s
Attaching to meshtastic
meshtastic  | + ./meshtasticd -d /home/mesh/data
meshtastic  | Portduino is starting, HWID=1, VFS root at /home/mesh/data
meshtastic  | Setting up Meshtastic on Portduino...
meshtastic  | No 'config.yaml' found, running simulated.
meshtastic  | INFO  | ??:??:?? 0
meshtastic  |
meshtastic  | //\ E S H T /\ S T / C
meshtastic  |
meshtastic  | DEBUG | ??:??:?? 0 Filesystem files:
meshtastic  | DEBUG | ??:??:?? 0  /prefs/channels.proto (57 Bytes)
meshtastic  | DEBUG | ??:??:?? 0  /prefs/. (0 Bytes)
meshtastic  | DEBUG | ??:??:?? 0  /prefs/.. (0 Bytes)
meshtastic  | DEBUG | ??:??:?? 0  /prefs/db.proto (512 Bytes)
meshtastic  | DEBUG | ??:??:?? 0  /. (0 Bytes)
meshtastic  | DEBUG | ??:??:?? 0  /.. (0 Bytes)
meshtastic  | INFO  | ??:??:?? 0 No I2C device configured, skipping.
meshtastic  | INFO  | ??:??:?? 0 No I2C devices found
meshtastic  | INFO  | ??:??:?? 0 Meshtastic hwvendor=37, swver=2.3.13.83f5ba01
meshtastic  | INFO  | ??:??:?? 0 Initializing NodeDB
meshtastic  | INFO  | ??:??:?? 0 Loading /prefs/db.proto
meshtastic  | INFO  | ??:??:?? 0 Loaded /prefs/db.proto successfully
meshtastic  | INFO  | ??:??:?? 0 Loaded saved devicestate version 22, with nodecount: 1
meshtastic  | INFO  | ??:??:?? 0 File /prefs/config.proto not found
meshtastic  | INFO  | ??:??:?? 0 Installing default LocalConfig
meshtastic  | INFO  | ??:??:?? 0 Setting default channel and radio preferences!
meshtastic  | DEBUG | ??:??:?? 0 Expanding short PSK #1
meshtastic  | INFO  | ??:??:?? 0 Wanted region 0, using UNSET
meshtastic  | INFO  | ??:??:?? 0 File /prefs/module.proto not found
meshtastic  | INFO  | ??:??:?? 0 Installing default ModuleConfig
meshtastic  | INFO  | ??:??:?? 0 Loading /prefs/channels.proto
meshtastic  | INFO  | ??:??:?? 0 Loaded /prefs/channels.proto successfully
meshtastic  | INFO  | ??:??:?? 0 Loaded saved channelFile version 22
meshtastic  | INFO  | ??:??:?? 0 File /oem/oem.proto not found
meshtastic  | DEBUG | ??:??:?? 0 cleanupMeshDB purged 0 entries
meshtastic  | DEBUG | ??:??:?? 0 Using nodenum 0x20981da7
meshtastic  | DEBUG | ??:??:?? 0 Expanding short PSK #1
meshtastic  | INFO  | ??:??:?? 0 Wanted region 0, using UNSET
meshtastic  | Portduino critical error: Failed to open posix file /dev/spidev0.0, errno=2
meshtastic  | No hardware spi chip found...
meshtastic  | DEBUG | ??:??:?? 0 Set Timezone to GMT0
meshtastic  | DEBUG | ??:??:?? 0 Read RTC time as 1720807719
meshtastic  | DEBUG | ??:??:?? 0 NeighborInfoModule is disabled
meshtastic  | INFO  | ??:??:?? 0 File /prefs/cannedConf.proto not found
meshtastic  | INFO  | ??:??:?? 0 CannedMessageModule is enabled
meshtastic  | INFO  | ??:??:?? 0 Starting meshradio init...
meshtastic  | DEBUG | ??:??:?? 0 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
meshtastic  | DEBUG | ??:??:?? 0 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
meshtastic  | INFO  | ??:??:?? 0 Radio freq=906.875, config.lora.frequency_offset=0.000
meshtastic  | INFO  | ??:??:?? 0 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30
meshtastic  | INFO  | ??:??:?? 0 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)
meshtastic  | INFO  | ??:??:?? 0 Radio myRegion->numChannels: 104 x 250.000kHz
meshtastic  | INFO  | ??:??:?? 0 Radio channel_num: 20
meshtastic  | INFO  | ??:??:?? 0 Radio frequency: 906.875000
meshtastic  | INFO  | ??:??:?? 0 Slot time: 42 msec
meshtastic  | INFO  | ??:??:?? 0 Using SIMULATED radio!
meshtastic  | ERROR | ??:??:?? 0 Error reading File : certificate.pem
meshtastic  | ERROR | ??:??:?? 0 ERROR SSL Certificate File can't be loaded or is missing
meshtastic  | INFO  | ??:??:?? 1 Create SSL Certifictate -certificate.pem- succesfull
meshtastic  | INFO  | ??:??:?? 1 Webserver port in yaml config set to 0, so defaulting to port 443.
meshtastic  | INFO  | ??:??:?? 1 Webserver started ....
meshtastic  | INFO  | ??:??:?? 1 Web Server framework started on port: 443
meshtastic  | INFO  | ??:??:?? 1 Web Server root
meshtastic  | INFO  | ??:??:?? 1 API server listening on TCP port 4403
meshtastic  | DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=237, time 2000 ms
meshtastic  | DEBUG | ??:??:?? 1 LoRA bitrate = 118.500000 bytes / sec
meshtastic  | INFO  | ??:??:?? 1 PowerFSM init, USB power=1
meshtastic  | DEBUG | ??:??:?? 1 Enter state: BOOT
meshtastic  | INFO  | ??:??:?? 30 [NodeInfoModule] Sending our nodeinfo to mesh (wantReplies=1)
meshtastic  | INFO  | ??:??:?? 30 [NodeInfoModule] sending owner !20981da7/Meshtastic 0001/0001
meshtastic  | DEBUG | ??:??:?? 30 [NodeInfoModule] Initial packet id 917327548, numPacketId 4294967295
meshtastic  | DEBUG | ??:??:?? 30 [NodeInfoModule] Update DB node 0x20981da7, rx_time=0
meshtastic  | DEBUG | ??:??:?? 30 [NodeInfoModule] handleReceived(LOCAL) (id=0x36ad4ebe fr=0xa7 to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=4 WANTRESP priority=10)
meshtastic  | DEBUG | ??:??:?? 30 [NodeInfoModule] No modules interested in portnum=4, src=LOCAL
meshtastic  | DEBUG | ??:??:?? 30 [NodeInfoModule] localSend to channel 0
^CGracefully stopping... (press Ctrl+C again to force)

[morvaivor]

Hello, I had the same problem when i try to execute it on raspberry pi zero w.

You have to use root user and privileged option while login into the docker because meshtasticd executable need to access to SPI and GPIO
I did this : sudo docker run -it -u 0 -p 4403:4403 -p 443:443 --privileged meshtastic/device bash

Then, you need to create the config.yaml file in the docker file system with correct values with "cat" command because vi or nano is not installed in this image. To finish you use ctrl + D

root@fd1dfa4217a9:/home/mesh#  cat > config.yaml
Lora:
  Module: sx1262 # Waveshare SX126X XXXM
  DIO2_AS_RF_SWITCH: true
  CS: 21
  IRQ: 16
  Busy: 20
  Reset: 18
Webserver:
  Port: 443 # Port for Webserver & Webservices
  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer

And then it starts :)