Skip to content

Latest commit

 

History

History
56 lines (43 loc) · 1.17 KB

HOWTOPLAY.rst

File metadata and controls

56 lines (43 loc) · 1.17 KB

How to play

About the network enviroment

There are three networks:

201.10.0.0 Router01 Switch01 Host01~04

200.171.0.0 Router02 Switch02 Host05~08

192.168.0.0 Router03 Switch03 Host09~12

Routers:

Router01 can communicate with Router02; Router02 can communicate with Router01 and 03; and Router03 can communicate with Router02.

Switchs: The Switchs make the communication between the Router and the Hosts.

Start to play:

To start to play you need to turn on a host (click on host you want), connect cables and open the terminal (click on the Terminal button).

To know which commands you can use in the terminal type help (@169.254.0.0:~$ help) and press enter to see the command list.

Use the command ping IP to test if there is communication between two hosts.

Command list:

help get (this) commands list ping [ip address] get ping ifconfig get host information ifconfig [ip address] set IP netmask [mask address] set mask ifconfig [ip address] netmask [mask address] set IP and Mask route get host routes clear clean bash bash --version see bash version date get today date