Feat: Athena adapter

.circleci/continue_config.yml

@@ -326,15 +326,16 @@ workflows:
           matrix:
             parameters:
               engine:
-                - snowflake
-                - databricks
-                - redshift
-                - bigquery
-                - clickhouse-cloud
-          filters:
-            branches:
-              only:
-                - main
+                #- snowflake
+                #- databricks
+                #- redshift
+                #- bigquery
+                #- clickhouse-cloud
+                - athena
+          #filters:
+          #  branches:
+          #    only:
+          #      - main
       - trigger_private_tests:
           requires:
             - style_and_slow_tests

.gitignore

@@ -108,6 +108,7 @@ venv/
 ENV/
 env.bak/
 venv.bak/
+venv*/
 
 # Spyder project settings
 .spyderproject

Makefile

@@ -10,7 +10,7 @@ install-doc:
 	pip3 install -r ./docs/requirements.txt
 
 install-engine-test:
-	pip3 install -e ".[dev,web,slack,mysql,postgres,databricks,redshift,bigquery,snowflake,trino,mssql,clickhouse]"
+	pip3 install -e ".[dev,web,slack,mysql,postgres,databricks,redshift,bigquery,snowflake,trino,mssql,clickhouse,athena]"
 
 install-pre-commit:
 	pre-commit install
@@ -209,3 +209,6 @@ redshift-test: guard-REDSHIFT_HOST guard-REDSHIFT_USER guard-REDSHIFT_PASSWORD g
 
 clickhouse-cloud-test: guard-CLICKHOUSE_CLOUD_HOST guard-CLICKHOUSE_CLOUD_USERNAME guard-CLICKHOUSE_CLOUD_PASSWORD engine-clickhouse-install
 	pytest -n auto -x -m "clickhouse_cloud" --retries 3 --junitxml=test-results/junit-clickhouse-cloud.xml
+
+athena-test: guard-AWS_ACCESS_KEY_ID guard-AWS_SECRET_ACCESS_KEY guard-ATHENA_S3_WAREHOUSE_LOCATION engine-athena-install
+	pytest -n auto -x -m "athena" --retries 3 --retry-delay 10 --junitxml=test-results/junit-athena.xml

docs/guides/configuration.md

@@ -483,6 +483,7 @@ Example snowflake connection configuration:
 
 These pages describe the connection configuration options for each execution engine.
 
+* [Athena](../integrations/engines/athena.md)
 * [BigQuery](../integrations/engines/bigquery.md)
 * [Databricks](../integrations/engines/databricks.md)
 * [DuckDB](../integrations/engines/duckdb.md)

docs/integrations/engines/athena.md

@@ -0,0 +1,67 @@
+# Athena
+
+## Installation
+
+```
+pip install "sqlmesh[athena]"
+```
+
+## Connection options
+
+### PyAthena connection options
+
+SQLMesh leverages the [PyAthena](https://github.com/laughingman7743/PyAthena) DBAPI driver to connect to Athena. Therefore, the connection options relate to the PyAthena connection options.
+Note that PyAthena uses [boto3](https://boto3.amazonaws.com/v1/documentation/api/latest/index.html) under the hood so you can also use [boto3 environment variables](https://boto3.amazonaws.com/v1/documentation/api/latest/guide/configuration.html#using-environment-variables) for configuration.
+
+| Option                  | Description                                                                                                                                                  |  Type  | Required |
+|-------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------|:------:|:--------:|
+| `type`                  | Engine type name - must be `athena`                                                                                                                          | string |    Y     |
+| `aws_access_key_id`     | The access key for your AWS user                                                                                                                             | string |    N     |
+| `aws_secret_access_key` | The secret key for your AWS user                                                                                                                             | string |    N     |
+| `role_arn`              | The ARN of a role to assume once authenticated                                                                                                               | string |    N     |
+| `role_session_name`     | The session name to use when assuming `role_arn`                                                                                                             | string |    N     |
+| `region_name`           | The AWS region to use                                                                                                                                        | string |    N     |
+| `work_group`            | The Athena [workgroup](https://docs.aws.amazon.com/athena/latest/ug/workgroups-manage-queries-control-costs.html) to send queries to                         | string |    N     |
+| `s3_staging_dir`        | The S3 location for Athena to write query results. Only required if not using `work_group` OR the configured `work_group` doesnt have a results location set | string |    N     |
+| `schema_name`           | The default schema to place objects in if a schema isnt specified. Defaults to `default`                                                                     | string |    N     |
+| `catalog_name`          | The default catalog to place schemas in. Defaults to `AwsDataCatalog`                                                                                        | string |    N     |
+
+### SQLMesh connection options
+
+These options are specific to SQLMesh itself and are not passed to PyAthena
+
+| Option                  | Description                                                                                                                                                                                      | Type   | Required |
+|-------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------|----------|
+| `s3_warehouse_location` | Set the base path in S3 where SQLMesh will instruct Athena to place table data. Only required if you arent specifying the location in the model itself. See [S3 Locations](#s3-locations) below. | string | N        |
+
+## Model properties
+
+The Athena adapter recognises the following model [physical_properties](../../concepts/models/overview.md#physical_properties):
+
+| Name              | Description                                                                                                                                                                               | Type   | Default |
+|-------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------|---------|
+| `s3_base_location`| `s3://` base URI of where the snapshot tables for this model should be written. Overrides `s3_warehouse_location` if one is configured.                                                   | string |         |
+| `table_type`      | Sets the [table_type](https://docs.aws.amazon.com/athena/latest/ug/create-table-as.html#ctas-table-properties) Athena uses when creating the table. Valid values are `hive` or `iceberg`. | string | `hive`  |
+
+
+## S3 Locations
+When creating tables, Athena needs to know where in S3 the table data is located. You cannot issue a `CREATE TABLE` statement without specifying a `LOCATION` for the table data.
+
+In addition, unlike other engines such as Trino, Athena will not infer a table location if you set a _schema_ location via `CREATE SCHEMA <schema> LOCATION 's3://schema/location'`.
+
+Therefore, in order for SQLMesh to issue correct `CREATE TABLE` statements to Athena, you need to configure where the tables should be stored. There are two options for this:
+
+- **Project-wide:** set `s3_warehouse_location` in the connection config. SQLMesh will set the table `LOCATION` to be `<s3_warehouse_location>/<schema_name>/<snapshot_table_name>` when it creates a snapshot of your model.
+- **Per-model:** set `s3_base_location` in the model `physical_properties`. SQLMesh will set the table `LOCATION` to be `<s3_base_location>/<snapshot_table_name>` every time it creates a snapshot of your model. This takes precedence over any `s3_warehouse_location` set in the connection config.
+
+
+## Limitations
+Athena was initially designed to read data stored in S3 and to do so without changing that data. This means that it does not have good support for mutating tables. In particular, it will not delete data from Hive tables.
+
+Consequently, any SQLMesh model types that needs to delete or merge data from existing tables will not work on Hive tables. In addition, [forward only changes](../../concepts/plans.md#forward-only-change) that mutate the schemas of existing tables have a high chance of failure because Athena supports very limited schema modifications on Hive tables.
+
+However, Athena does support [Apache Iceberg](https://docs.aws.amazon.com/athena/latest/ug/querying-iceberg.html) tables which allow a full range of operations. These can be used for more complex model types such as [`INCREMENTAL_BY_UNIQUE_KEY`](../../concepts/models/model_kinds.md#incremental_by_unique_key) and [`SCD_TYPE_2`](../../concepts/models/model_kinds.md#scd-type-2).
+
+To use an Iceberg table for a model, set `table_type='iceberg'` in the model [physical_properties](../../concepts/models/overview.md#physical_properties).
+
+In general, Iceberg tables offer the most flexibility and you'll run into the least SQLMesh limitations when using them. However, we create Hive tables by default because Athena creates Hive tables by default, so Iceberg tables are opt-in rather than opt-out.

docs/integrations/overview.md

@@ -11,6 +11,7 @@ SQLMesh supports integrations with the following tools:
 ## Execution engines
 SQLMesh supports the following execution engines for running SQLMesh projects:
 
+* [Athena](./engines/athena.md)
 * [BigQuery](./engines/bigquery.md)
 * [Databricks](./engines/databricks.md)
 * [DuckDB](./engines/duckdb.md)

mkdocs.yml

@@ -66,6 +66,7 @@ nav:
       - integrations/dbt.md
       - integrations/github.md
     - Execution engines:
+      - integrations/engines/athena.md
       - integrations/engines/bigquery.md
       - integrations/engines/clickhouse.md
       - integrations/engines/databricks.md

pytest.ini

@@ -20,6 +20,7 @@ markers =
     spark_pyspark: test for Spark with PySpark dependency
     # Engine Adapters
     engine: test all engine adapters
+    athena: test for Athena
     bigquery: test for BigQuery
     clickhouse: test for Clickhouse (standalone mode)
     clickhouse_cluster: test for Clickhouse (cluster mode)

setup.py

@@ -50,6 +50,7 @@
         "sqlglot[rs]~=25.22.0",
     ],
     extras_require={
+        "athena": ["PyAthena[Pandas]"],
         "bigquery": [
             "google-cloud-bigquery[pandas]",
             "google-cloud-bigquery-storage",

sqlmesh/core/config/connection.py

@@ -1467,6 +1467,66 @@ def _static_connection_kwargs(self) -> t.Dict[str, t.Any]:
         return {"compress": compress, "client_name": f"SQLMesh/{__version__}", **settings}
 
 
+class AthenaConnectionConfig(ConnectionConfig):
+    # PyAthena connection options
+    aws_access_key_id: t.Optional[str] = None
+    aws_secret_access_key: t.Optional[str] = None
+    role_arn: t.Optional[str] = None
+    role_session_name: t.Optional[str] = None
+    region_name: t.Optional[str] = None
+    work_group: t.Optional[str] = None
+    s3_staging_dir: t.Optional[str] = None
+    schema_name: t.Optional[str] = None
+    catalog_name: t.Optional[str] = None
+
+    # SQLMesh options
+    s3_warehouse_location: t.Optional[str] = None
+    concurrent_tasks: int = 4
+    register_comments: bool = False  # because Athena doesnt support comments in most cases
+    pre_ping: Literal[False] = False
+
+    type_: Literal["athena"] = Field(alias="type", default="athena")
+
+    @model_validator(mode="after")
+    @model_validator_v1_args
+    def _root_validator(cls, values: t.Dict[str, t.Any]) -> t.Dict[str, t.Any]:
+        work_group = values.get("work_group")
+        s3_staging_dir = values.get("s3_staging_dir")
+
+        if not work_group and not s3_staging_dir:
+            raise ConfigError("At least one of work_group or s3_staging_dir must be set")
+
+        return values
+
+    @property
+    def _connection_kwargs_keys(self) -> t.Set[str]:
+        return {
+            "aws_access_key_id",
+            "aws_secret_access_key",
+            "role_arn",
+            "role_session_name",
+            "region_name",
+            "work_group",
+            "s3_staging_dir",
+            "schema_name",
+            "catalog_name",
+        }
+
+    @property
+    def _engine_adapter(self) -> t.Type[EngineAdapter]:
+        return engine_adapter.AthenaEngineAdapter
+
+    @property
+    def _extra_engine_config(self) -> t.Dict[str, t.Any]:
+        return {"s3_warehouse_location": self.s3_warehouse_location}
+
+    @property
+    def _connection_factory(self) -> t.Callable:
+        from pyathena import connect  # type: ignore
+
+        return connect
+
+
 CONNECTION_CONFIG_TO_TYPE = {
     # Map all subclasses of ConnectionConfig to the value of their `type_` field.
     tpe.all_field_infos()["type_"].default: tpe

sqlmesh/core/engine_adapter/__init__.py

@@ -17,6 +17,7 @@
 from sqlmesh.core.engine_adapter.snowflake import SnowflakeEngineAdapter
 from sqlmesh.core.engine_adapter.spark import SparkEngineAdapter
 from sqlmesh.core.engine_adapter.trino import TrinoEngineAdapter
+from sqlmesh.core.engine_adapter.athena import AthenaEngineAdapter
 
 DIALECT_TO_ENGINE_ADAPTER = {
     "hive": SparkEngineAdapter,
@@ -31,6 +32,7 @@
     "mysql": MySQLEngineAdapter,
     "mssql": MSSQLEngineAdapter,
     "trino": TrinoEngineAdapter,
+    "athena": AthenaEngineAdapter,
 }
 
 DIALECT_ALIASES = {