ofa - Command line AWS credential management with an IdP

Command line access to IdP Authentication and AWS IAM role assignment without a browser.

See the Changes file for a list of changes and Development for information on how to build and contribute to this project.

This software is provided as is under MIT license. It may contain bugs and does not work in all possible corner cases. I have access to developer accounts on OneLogin and Auth0. There is no usable, permanent free tier on Okta.

Installation

The preferred way to install ofa is by downloading the latest release for your system architecture from the package repository. When running on macOS, please see the note about code signing when running ofa for the first time.

Alternatively, install ofa from source through the golang package system by running

$ go install github.com/hgschmie/ofa/v3@latest

This also sidesteps the signing problems with macOS. If the security policy on your computer does not allow unsigned binaries, this is the best way to install ofa.

A release version of ofa reports

$ ofa version
INFO ofa 3.0.2, commit d6df9685bd926a7fe09c0959f729ee6bbfe1ab1b, built at 2022-01-15T18:27:52Z by goreleaser

while a self-built or development version reports

$ ofa version
INFO ofa dev, commit none, built at unknown by unknown

State of IdPs

Okta - Supported, Functional
OneLogin - Supported, Functional
Auth0 - Partially supported, Not functional

Okta

The Okta code is brittle as it uses a a semi-documented way that needs to parse a HTML page to access the necessary SAML Assertion.

OneLogin

Only documented APIs are used. Does not support all available authentication methods (patches for WebAuthn wanted!).

Supports the Multi-Account application (will prompt for matching accounts and roles).

There are some minor issues when Push notifications get denied on the mobile app, see SAML verify factor API call with authentication denied .

Auth0

Auth0 does not work. I could not figure out how to get this to work Auth0 Forum Thread.

Bonus feature: Command line completion

ofa supports command line completion for bash, fish and zsh, e.g. for bash:

$ eval $(ofa completion bash)

will activate TAB-completion for all ofa commands.

Using Okta

Prerequisite: Setting up Okta and AWS

The ofa tool assumes that your Okta/AWS setup is using the "AWS Account Federation" Okta application AWS Account Federation.

This requires a regular Okta account or at least an Okta trial account; developer accounts do not allow installation of applications.

Okta configuration reference

Key	Flag	Function
`url`	`--set-url` `--url`	Base/Organization URL. `https://<subdomain>.okta.com/`
`okta_app_url`	`--set-okta-app-url` `--okta-app-url`	Application URL. See below.
`okta_auth_method`	`--set-okta-auth-method` `--auth-method`	Supported methods are `push`, `sms` and `totp`.

Use the Okta organization URL, usually https://<company name>.okta.com/ as the Base/Organization URL.
Locate the application URL by logging into the Okta organization, then hover over the AWS application icon in the web view and selecting "Copy Link Address" in the browser. Stripping the query section (?fromHome=true) from this URL gives the Okta application URL.

Supported Authentication methods

When using MFA, the user account must be already enrolled using the MFA. ofa does not support the enrollment flow.

push - Using the Okta Mobile application. Approve/Deny directly on the mobile application.
sms - Sending a text message, then prompting for the code from the text message.
totp - Using an Authentication application (Google Authenticator, Authy etc.), prompts for the TOTP code.

Using OneLogin

Prerequisite: Setting up OneLogin and AWS

The ofa tool assumes that your OneLogin/AWS setup is using the "Amazon Web Services", "Amazon Web Services (AWS) Multi Account" or "Amazon Web Services (AWS) Multi Role" application. There is a great walkthrough which describes the setup in detail.

Make sure that you can log into your AWS Account or Accounts using the OneLogin Application portal.

This setup works with the OneLogin free / developer tier ("Developer Basic") available at https://www.onelogin.com/developer-signup

Unlike the Okta Trial Accounts, these do not expire (see the /subscription/edit tab in the developer account).

Prerequisite: Setup API Access

Using "Developers" -> "API Credentials" -> "New Credential", create a new credential.
Choose "Authentication only" for permissions.

Copy the "Client ID" and "Client Secret" values.

This credential needs to be shared between all users of the ofa application within an application. It allows users to authenticate with the API so it should be kept confidential. However, it does require a second (login and password) and potentially a third factor (MFA) to actually acccess any service. It is most useful to track all users that use the ofa client tool to authenticate.

OneLogin configuration reference

Key	Flag	Function
`url`	`--set-url` `--url`	Base/Organization URL. `https://<subdomain>.onelogin.com/`
`onelogin_auth_method`	`--set-onelogin-auth-method` `--onelogin-auth-method`	Supported methods are `push`, `sms`, `email`, `totp`
`onelogin_client_id`	`--set-onelogin-client-id` `--onelogin-client-id`	API Credential client id
`onelogin_client_secret`	`--set-onelogin-client-secret` `--onelogin-client-secret`	API Credential client secret
`onelogin_app_id`	`--set-onelogin-app-id` `--onelogin-app-id`	OneLogin application id
`onelogin_api_url`	`--set-onelogin-api-url` `--onelogin-api-url`	OneLogin API endpoint

The tool assumes that it can determine the actual subdomain by taking the first part of the host name of the Base/Organization URL.
Administrators can locate the application id by opening the application settings page in the Administration portal. The app-id is in the URL: /apps/<app-id>/edit.
OneLogin has multiple API endpoints around the world. If unset, it defaults to https://api.us.onelogin.com/.

Supported Authentication methods

When using MFA, the user account must be already enrolled using the MFA. ofa does not support the enrollment flow.

push - Using the OneLogin Protect application. Approve/Deny directly on the mobile application.
sms - Sending a text message, then prompting for the code from the text message.
email - Sending an email, then prompting for the code from the mail.
totp - Using an Authentication application (Google Authenticator, Authy etc.), prompts for the TOTP code.

OneLogin Multi Account setup

OneLogin allows using a single OneLogin application to log into multiple AWS accounts. When using the Application from a brower, AWS will present a selection screen where the accounts and roles are listed for user selection.

This is the preferred way to setup multiple accounts and roles. The selection screen for role selection will either list the numeric AWS account id or, if an account alias is configured, the account alias.

Usage

For all IdPs

ofa manages global settings and profiles to log into an IdP and assume an AWS role.

Each profile contains

IdP Type and configuration
Login information and authentication method
AWS account and role to assume
AWS session time

ofa uses four sources for each value in order of precedence:

command line arguments
profile settings (requires profile selection)
global settings
interactive prompt (if running in interactive mode)

profile selection happens through a default profile setting, or a command line flag.

commands and flags

The ofa application supports the --help flag and the help command everywhere.

ofa defaults set
ofa defaults show
ofa profile create
ofa profile list
ofa profile show
ofa profile update
ofa profile remove
ofa password set
ofa password remove
ofa login

The ofa version command displays the version and build information.

global flags

Every ofa command supports the following global flags:

--no-config

Ignore any config file. Parameters and interactive input must provide all parameters.

--interactive

Force interactive mode (overrides default). ofa will prompt for input if required. This is the default unless configured otherwise.

--batch

Never prompt for input. ofa will never prompt the user for input.

--quiet

Only output minimal or no information.

--verbose

Output more information during operation. This is the default unless configured otherwise.

ofa defaults command

ofa manages a set of defaults to use when neither flags or profile settings are available.

By default, ofa will prompt for every setting interactively when executing the set subcommand.

To set a single flag without prompting:

ofa --set-interactive=false --batch

ofa manages the default state of the interactive and verbose flags and provides default settings for:

profile name (which profile to use unless overridden by a command line parameter)
Username
IdP type and authentication method
Base/Organization URL
IdP specific settings
AWS account and role to assume
AWS session time

ofa profile command

ofa can manage multiple profiles for logging into AWS using an IdP. Profiles are independent and can refer to multiple IdP and AWS accounts.

Each profile may consist of

Username
IdP type and authentication method
Base/Organization URL
IdP specific settings
AWS account and role to assume
AWS session time

All parameters are optional, the tool may fall back to its defaults or prompt in interactive mode.

The ofa profile list command lists all available profiles.

The ofa profile show command shows details for one or all profiles, depending on the --profile flag.

To create a new profile, the ofa profile create command will either use command line parameters or prompt for the profile settings.

The ofa profile update command allows editing of existing profiles.

The ofa profile delete command removes an existing profile.

ofa profiles and AWS profiles

ofa maintains a configuration file that controls the login information for a profile. However, ofa was designed to work with arbitrary profile names and having a profile in ofa itself is not necessary. This is intentional and not a bug.

As ofa can be used fully interactive or all settings could be covered by defaults, the following command actually does nothing:

ofa profile create --profile=new_profile --batch`

because there is no setting associated with the profile. It can still be used for logging in:

ofa login --profile=some_random_name

will work well (and use either defaults or interactive inputs) to log into the IdP and then write credentials for " some_random_name" into the AWS credentials file.

ofa password command (macOS only)

On macOS , ofa can store passwords in the user specific keychain.

IdPs are single signon systems and identified by the Base/Organization URL, so each combination of this URL and a login is unique, even if used in multiple profiles.

ofa password set sets a password in the keychain, ofa password remove removes it. The set command will override an existing password.

Note that the keychain might prompt (with a modal dialog) when using a password. It is not recommended to always allow ofa access to a keychain entry as this removes a security factor.

ofa login command

The ofa login command authenticates using the selected IdP and then uses the information to log into AWS, assume an account and a role and create credentials.

This command uses all available sources (command line parameters, profile settings, default settings and interactive input).

A successful login and role selection creates a new set of AWS credentials. These credentials are written into the AWS credentials file using the profile name.

Writing the credentials file can be avoided by using the --eval flag. In this case, ofa prints output that can be evaluated in the calling shell.

When setting default values for profile, AWS account and AWS role, ofa login can operate without any prompting the user. However, sometimes it is useful to explicitly force profile or role selection. The --no-default-profile and --no-default-role flags can be used for this.

Examples

Okta

Set up defaults and a profile:

ofa defaults set --set-user=<user name> --set-okta-auth-method=push --set-url=https://<organization>.okta.com/ --set-session-time=14400 --batch

Create defaults for using Okta as IdP. When using a single Okta instance, the username, authentication method and Okta URL will always be the same. Setting them as default makes profile generation simpler.

ofa password set

As URL and username exist as defaults, this command only prompts for the password and stores it in the keychain.

ofa profile create --profile=new_profile --set-profile-type=okta --set-role=<aws role to assume> --set-okta-app-url=<... okta aws app url as described above ...> --batch

This command assigns the remaining, profile specific settings to the new_profile profile.

ofa defaults set --set-profile=new_profile --batch

Make the new profile the default unless there is a profile name set with a parameter.

ofa login

will initiate a login using the default IdP (Okta configured as described above), assume the role in the new_profile profile and write AWS credentials in the [new_profile] section of the AWS credentials file.

eval $(ofa login --eval)

allows setting of environment variables without touching the AWS credentials file.

Set up a second profile:

ofa profile create --profile=dev --set-profile-type=okta --set-okta-app-url=<... okta aws app url as described above ...> --batch

Unlike the previous profile, this one does not contain an AWS role. If Okta returns more than one role, ofa will prompt:

ofa login --profile dev
INFO **** Global Flags:
INFO Ignore Configuration:     false (default value)
INFO Verbose:                  true (default value)
INFO Interactive:              true (default value)
INFO **** Login Session:
INFO Profile name:             dev (flag: 'profile')
INFO Okta username:            <okta user name> (global config, key: 'user')
INFO Profile type:             okta (profile [dev], key: 'profile_type')
INFO Base/organization URL:    https://<organization>.okta.com/ (global config, key: 'url')
INFO Okta password:            <configured> (Keychain for Okta URL 'https://<organization>.okta.com/', username '<okta user name>')
INFO Okta AWS app URL:         <... okta app url ...> (profile [dev], key: 'okta_app_url')
INFO Okta auth method:         push (global config, key: 'okta_auth_method')
INFO AWS session time:         14400 (global config, key: 'aws_session_time')
INFO **** Logging into Okta
INFO **** Initiating MFA Challenge
INFO **** Okta login successful
INFO **** Fetching Okta SAML response
INFO **** Selecting AWS role from SAML response
? Select AWS Role:
  ▸ role_1 account-id
    role_2 account-id
    role_3 account-id

after selecting a role, ofa writes credentials in the AWS credentials file and exits.

OneLogin

1. Set up defaults

ofa defaults set --batch \
                 --set-user=<user name> \
                 --set-session-time=14400 \
                 --profile-type=onelogin \
                 --set-url=https://<subdomain>.onelogin.com/ \
                 --set-onelogin-auth-method=push \
                 --set-onelogin-api-url=https://api.<region>.onelogin.com/ \
                 --set-onelogin-app-id=<onelogin app id> \
                 --set-onelogin-client-id=<api access client id> \
                 --set-onelogin-client-secret=<api access client secret>

Creates defaults for ofa. As this will be using OneLogin, it configures all the OneLogin defaults for a single OneLogin instance where the username, base url and the client parameters will all be the same.

Making them defaults simplifies profile generation. All defaults can be overridden on a per-profile basis.

Notes:

subdomain name and onelogin app id should be provided by the OneLogin administrator.
An API access credential (see above) must be set.
Choose the OneLogin region accordingly (e.g. us for US, eu for Europe).

2. Set the user password

ofa password set

URL and username exist as defaults, this command only prompts for the password and stores it securely in the keychain.

3. Create a profile

The name of the profile must match the name of the AWS profile where the credentials are stored!

ofa profile create --batch \
                   --profile=new_profile \
                   --set-account=<aws account for role>
                   --set-role=<aws role to assume>

This command creates the new_profile profile and assigns a specific AWS account and role to assume. The role and account parameter are optional, if any is missing, ofa will present a menu selection with all matching roles.

Optional: Make the new profile the default

ofa defaults set --set-profile=new_profile --batch

Make the new profile the default unless there is a profile name set with a parameter.

4. Retrieve AWS credentials using OneLogin IdP

ofa login --profile=new_profile

will initiate a login using OneLogin, assume the role in the new_profile profile and write AWS credentials in the [new_profile] section of the AWS credentials file.

eval $(ofa login --profile=new_profile --eval)

allows setting of environment variables without writing them to the AWS credentials file.

Bonus: Setting multiple profiles

ofa profile create --batch \
                   --profile=dev \
                   --set-session-time=3600

Unlike the previous profile, this one does not contain an AWS role. If OneLogin returns more than one role, ofa will prompt for role selection:

INFO **** Global Flags:
INFO Ignore Configuration:               false (default value)
INFO Verbose:                            true (flag: 'verbose')
INFO Interactive:                        true (default value)
INFO **** Login Session:
INFO Profile name:                       dev (flag: 'profile')
INFO Profile type:                       onelogin (global config, key: 'idp_type')
INFO Username:                           <username> (global config, key: 'user')
INFO Base/organization URL:              https://<subdomain>.onelogin.com/ (global config, key: 'url')
INFO Password:                           <configured> (Keychain for Okta URL 'https://<subdomain>.onelogin.com/', username '<username>')
INFO Onelogin auth method:               push (global config, key: 'onelogin_auth_method')
INFO Onelogin Application Client Id:     <api authencation client id> (global config, key: 'onelogin_client_id')
INFO Onelogin Application Client Secret: <configured> (global config, key: 'onelogin_client_secret')
INFO Onelogin Application Id:            <app id> (global config, key: 'onelogin_app_id')
INFO Onelogin API Url:                   https://api.us.onelogin.com/ (global config, key: 'onelogin_api_url')
INFO AWS session duration:               3600 (profile [dev], key: 'aws_session_time')
INFO **** Logging into Onelogin
INFO **** Initiating MFA Challenge
INFO **** Selecting AWS role from SAML response
? Select AWS Role:
  ▸ role_A aws_account 1
    role_B aws_account 1
    role_1 aws_account 2
    role_2 aws_account 2
    role_A aws_account 3
    role_B aws_account 3

In this example, there are multiple AWS accounts configured (aws_account 1-3) and for some of them, the role names are overlapping (role_A and role_B are present in aws_account 1 and aws_account 2).

Name		Name	Last commit message	Last commit date
Latest commit History 75 Commits
.github/workflows		.github/workflows
changes		changes
cmd		cmd
lib		lib
.changie.yaml		.changie.yaml
.gitignore		.gitignore
.goreleaser.yml		.goreleaser.yml
CHANGES.md		CHANGES.md
DEVELOPMENT.md		DEVELOPMENT.md
LICENSE		LICENSE
README.md		README.md
do_release.sh		do_release.sh
go.mod		go.mod
go.sum		go.sum
main.go		main.go

License

hgschmie/ofa

Folders and files

Latest commit

History

Repository files navigation

ofa - Command line AWS credential management with an IdP

Installation

State of IdPs

Okta

OneLogin

Auth0

Bonus feature: Command line completion

Using Okta

Prerequisite: Setting up Okta and AWS

Okta configuration reference

Supported Authentication methods

Using OneLogin

Prerequisite: Setting up OneLogin and AWS

Prerequisite: Setup API Access

OneLogin configuration reference

Supported Authentication methods

OneLogin Multi Account setup

Usage

For all IdPs

commands and flags

global flags

ofa defaults command

ofa profile command

ofa profiles and AWS profiles

ofa password command (macOS only)

ofa login command

Examples

Okta

OneLogin

1. Set up defaults

2. Set the user password

3. Create a profile

Optional: Make the new profile the default

4. Retrieve AWS credentials using OneLogin IdP

Bonus: Setting multiple profiles

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 7

Languages