Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
[1.6.0] - 2024-06-28: Main changes since 1.5.0 Tested Segger Embedded Studio Version: 8.10d Tested IAR Embedded Workbench for RISC-V Version: 3.30.1 - Known Issue: - some IAR projects does not work properly when optimization level is increased - Changed: - soc: reorganize the directory structure - soc: hpm6750: declare get_frequency_for_source API for clock drver header file - soc: update soc cmakelists to add b ext info - soc: hpm6750: add feature for ioc pad ctrl setting issue - soc: toolchains: gcc: correct LMA for NOLOAD sections - soc: move eh_frame into separate section - boards: hpm6750xxxx apply workaround for E00029. - boards: change hpm5301evklite adc16 channel - boards: board.h: adc16: add marco BOARD_APP_ADC16_HW_TRIG_SRC_CLK_NAME - boards: adjust function position of adc pin initialization - boards: hpm6300evk and hpm6e00evk: sdram use px07 as femc dqs pin - boards: hpm6e00evk: rename init_sdram_pins to init_femc_pins - boards: hpm6e00evk: change board i2c instance to I2C0 - drivers: can/mcan add parameter check for low-level bit timing. - drivers: enet: add bitfield ENET0_RMII_TXCLK_SEL for hpm6300 - drivers: i2c: add DATACNT high byte process - drivers: pwm: update HRPWM process - drivers: spi: optimize reading speed for spi_read_data API - drivers: spi: add set/get data phase format APIs for spi master - drivers: spi: delete the spi startand operation APIs - drivers: adc16: remove an unused member conv_duration from adc16_config_t - drivers: enet: update for enet_interrupt_enable_t - drivers: mcan reduce unnecessary register access in mcan_read_rxfifo. - drivers: mtg: add calculate function param clock - drivers: mtg: add several calculate functions - drivers: mcan lookeup the mcan msg ram base via mcan_soc_msg_buf variable if the MSG_BUF is in AHB RAM. - drivers: adc16: disable improvement logic of adc16 for continuous sampling maximum voltage - drivers: mcan improve transmitter delay compensation setting logic. - drivers: femc: rename data_width_in_byte to cmd_data_width - drivers: femc: update ns2cycle() to align up - drivers: common: add packed attribute - drivers: femc: delete duplicate config - drivers: mtg: change the default parameters to the low order filter - drivers: adc16: add API adc16_set_seq_hw_trigger_enable() - drivers: spi : convert enumeration return in that gets parameters APIs - drivers: pwm: add fault recovery code. - driver: pwm: change pwm trig time - components: enet_phy: dp83867/rtl8211: move the macro definition RGMII to board-level CMakeLists.txt - components: eeprom_emulation: Add ATTR_RAMFUNC for all function - components: eeprom_emulation: add power-off protection mechanism. - components: dma_mgr: add burst in fixed transfer size and swap feature - components: spi: add full_duplex and half_duplex operating APIs - components: spi: support 1 to 32 bits width transfer for nonblocking APIs - components: usb: device: support iso transfer mult feature - middleware: hpm_sdmmc add emmc sleep & wakeup function. - middleware: tinyusb: ehci: support chain transfer - middleware: threadx: add low power support - middleware: cherryusb: update for advance descriptor - middleware: hpm_sdmmc: optimized to support multiple cards - middleware: cherryusb/tinyusb/usbx: enable suspend isr - middleware: FreeRTOS: update to 202210.01 lts - middleware: cherryusb: update to v1.3.0 - middleware: freertos: modify missed timer count num - middleware: freertos: update IAR port file - middleware: freertos: delete fence operations - middleware: freertos: make the calculation more simple. - middleware: hpm_sdmmc add cache control macro. - middleware: hpm_sdmmc: improve the logic for detecting CMD23 support. - middleware: freertos: add tickless stop mode support - middleware: freertos: add user custom process function call - middleware: hpm_mcl_v2: add hpm smc control. - middleware: freertos: place xPortxxx to isr_vector section - middleware: hpm_math: add dsp support for zcc - middleware: microros: add zcc support - middleware: rtos: asm adjustment for zcc toolchain - middleware: hpm_mcl_v2: add pwm dead area compensation. - middleware: hpm_mcl_v2: add dq axis decoupling function - middleware: cherryusb: add macro USBH_USE_CUSTOM_ISR/USBD_USE_CUSTOM_ISR - middleware: lvgl: upgrade to v9 - middleware: lvgl: rewrite the scissor. - middleware: lvgl: upgrade allocate algorithm for draw_buf. - samples: rdc: remove unused dac driver in sample - samples: lwip/netxduo/modbus: add conditional compile for reference clock setting in RMII mode - samples: audio_codec: common: change FIL_SEARCH_NUM from 10 to 20 - samples: dhyrstone: surpress build warnings - samples: dhrystone Optimize performance. - samples: coremark Optimize performance. - samples: drivers: spi: interrupt: transmission optimization. The transmission will start after the configuration is completed. - samples: adapt spi components to drive and move to the samples dir for spi sdcard samples - samples: cherryusb: device: change descriptor string to HPMicro - samples: cherryusb: device: use advanced descriptor to support high/full speed - samples: rename jpeg to image - samples: drivers: sdxc: sd_fatfs: add card hotplug support - samples: cherryusb: host: usbnet: replace block to noblock for read terminal char - samples: cherryusb: host: usbnet: decrease lwip MEM_SIZE - samples: cherryusb: move host hid info print code to thread - samples: audio_codec: refactoring code - samples: spi: dma: SPI master transmission optimization - samples: mtg: make the open_loop_trajectory sample more readable - samples: drivers: adc16: add some misc optimization - samples: drivers: adc16: add pwmv2 support - samples: motor_ctrl: bldc_foc_hw: remove hardware control - samples: drivers: mcan add tips for the usage of tdc. - samples: vglite: update rtos config file to fit gptmr tickless mode - samples: lwip/modus/netxduo: add a function call to get the enet default interrupt config - samples: sdm: using pwm to provide clock for sdm sensor. - samples: spi_components: half_duplex: updated to support 1 to 32bits width transfer - samples: spi_components: full_duplex: updated to support 1 to 32bits width transfer - samples: add freertos tickless stop mode sample - samples: benchmark: update compile options for zcc - samples: drivers: adc16: optimize the process logic of sequence and preemption - samples: drivers: sei: device: tamagawa: update eeprom cmd - samples: adc12: optimization for trigger mux and trigger frequency settings - samples: sei: device: tamagawa: support EEPROM protocol - samples: mcl: add pwm dead area compensation. - samples: motor_ctrl: add dq axis decoupling function - samples: cherryusb: move dual_port samples to dual_port folder - samples: cherryusb: adapter to cherryusb v1.3.0 - samples: drivers: adc12/adc16/dac: support abort feature in interactive terminal - samples: lwip: lwip_iperf: support abort feature to reselect the test mode - samples: lwip: common: multiple: add definitions of remote ip addresses for iperf - samples: motor_ctrl: bldc_lvlg_foc: add lvgl v8.3.5 for this demo - samples: tinyusb: uac2: support full speed - samples: power_mode_switch: update readme - samples: cherryusb: uac2: change default samplerate order - samples: bldc_foc: update bldc_foc_angle_align() for hardware loop - cmake: toolchain: add ar option to remove timestamp - cmake: toolchain: suppress output while querying spec - cmake: lld: update link option for zcc - cmake/scripts/soc: support b ext convertion to tools - cmake: sdk_app_src_glob: modify to recursive - Fixed: - soc: update USE_NONVECTOR_MODE defined used - soc: initialize .fast_ram.* section - soc: iar linker: fix safe stack init - soc: add missing ptmr clock - soc: hpm6880: fix get_frequency_for_i2s error - soc: hpm6880: Modify the value of SPI_SOC_FIFO_DEPTH from 4 to 8. for hpm_soc_feature.h - soc: toolchain: iar fix iar ram_stress issue in ram_debug build. - boards: hpm5301evklite: fixed can't output work for gptmr samples such as pwm_generate - drivers: enet: fix the clearing of DMA PBL setting - drivers: dma: fix dma_clear_transfer_status() API - drivers: sdxc Fix timeout calculation issue and DMA enabling logic. - drivers: adc16: fix the logic of adc16_set_pmt_queue_enable() when the parameter enable is false - drivers: mbox: fix error that BEIE can't be operated by interface - drivers: spi: fixed assignment value error for spi_set_clock_phase and spi_set_clock_polarity APIs - drivers: lcdc: fix ST and DMA_ST clear api. - drivers: mipi_dsi: fix MIPI_DSI_FMT_RGB565 config. - drivers: spi: fixed assignment error issue for enable/disable address phase APIs - drivers: i2c: fix return value type of i2c_get_data_count() - components: usb device/enet_phy: fix unwanted files in localize folder - components: panle: fix panel timing. - components: eeprom_emulation: demo flash crashed. - middleware: cherryusb: ehci: delete timeout clear before give sem - middleware: uC/OS-III: modify fpu context save&restore - middleware: cherryusb: fix freertos enter/exit critical - middleware: audio_codec: fix hpm_wav_decode() single channel pbuf data - middleware: mclv2: fix andes toolchain compiler error. - middleware: cherryusb: fix ehci_qh_pool init miss busid for v1.3.0 - middleware: lwip: apps: lwiperf: fix the bug of failing to restart iperf in TCP/UDP server mode - middleware: tinyusb: fix _usbd_dev.speed error to support full speed - middleware: hpm_mcl_v2: fix uncontrolled after large changes in motor speed. - samples: dhyrstone: fix build issue for release type using nds toolchain - samples: lwip: lwip_tcpclient: fix TCP commnuication error after DHCP enabled - samples: lwip: lwip_tcpclient_freertos_socket: fix connection error before IP assigned from DHCP - samples: correct cmsis_os2/mem_pool project name - samples: multicore: common Fix SDP memcpy blocking issue in ram_build. - samples: lwip: lwip_tcpecho_xxx_rtthread_nano: fix failing to get IP by DHCP serivice - samples: spi_sdcard: fixed the place section name error issue - samples: cherryusb: audio: fix wm8960 codec volume max value - samples: img: jpeg_decode: fix decode when only one qtab exist. - samples: tflm: mlperf: remove unnecessary codes. - samples: fix cherryusb mic no sound error - samples: spi_components: polling: fixed doesn't work for polling samples - samples: tamagawa: fix delay times is zero. - samples: bldc_foc: fix hardware_foc position loop error - cmake: link ndsgcc itf for application - cmake: localize_sdk: use utf-8 as default encoding - cmake: ide: keep preprocessing definition - Added: - soc: add zcc toolchain support - soc: clock_driver Add clock_set_wdg_source API. - soc: gcc linker: add fast_ram.init section size overflow check - soc: add FreeRTOS vector mode support - soc/board: add HPM6E80 support - drivers: common: add macros for .fast_ram.* - drivers: enet: add an API enet_get_default_interrupt_config - drivers: enet: add MII mode support - drivers: common add api for converting tick to us or ms. - drivers: pllctlv2 add new API to configure PLL. - drivers: uart: add uart_modem_write_rts_pin API - drivers: uart: add get/clear addr match flags APIs such as addr_match, addr_match_idle, data_lost - drivers: add lobs drivers - drivers: usb: add some APIs for low power future usage drivers: spi: add spi_slave_set_user_status API - drivers: usb: add suspend/resume APIs - drivers: usb: add enter/exit lower power suspend APIs - drivers: spi: add read SPI RX/TX FIFO size APIs - drivers: usb: add usb_set_port_test_mode() API - drivers: sdp add new apis. - drivers: mcan add new api for canceling pending transmission. - drivers: mtg: add get&clear event irq interface - drivers: qeiv2: add oneshot mode - drivers: add clc driver - drivers: add vsc driver - drivers: spi: add get/set shift direction APIs - drivers: uart: add an new API uart_try_receive_byte() - drivers: pixelmux: add api that set mipi dsi date type. - drivers: gptmr: add monitor function APIs - drivers: gptmr: add opmode APIs - drivers: gptmr: add qeimode APIs - components: add i2s_over_spi - components: codec: add wm8978 - components: enet_phy: add jl1111 driver - components: add ppi components - components: touch: add gt9271 driver. - components: debug_console: add a new API console_try_receive_byte() - middleware: add lodepng - middleware: add minimp3 - samples: cherryusb: device: add WinUSB 1.0 and WinUSB 2.0 samples - samples: lwip: add LPI interrupt mask setting - samples: add i2s_emulation sample - samples: lvgl_audio_player: support mp3 decoder - samples: uart: add uart_rx_line_status sample - samples: add half_duplex samples for spi_components - samples: add full_duplex samples for spi_components - samples: drivers: sdxc: emmc add new sameple for eMMC sleep & awake. - samples: drivers: add lobs sample - samples: drivers: spi: sd/sd_fatfs: support DMA transfer - samples: threadx: add low power mode sample - samples: image: add png encoder sample - samples: image: add png decoder sample - samples: audio_codec: add decoder_mp3 sample - samples: ppi: add parallel adc sample - samples: ppi: add async_sram sample - samples: qeov2: add wave_out sample - samples: qeov2: add abz_out sample - samples: pwm: add async fault demo - samples: motor_ctrl: add hardware foc - samples: drivers: pwmv2: add pwmv2 pair waveform - samples: dmav2: add dmav2_fixed_burst_swap sample - samples: qeiv2: add oneshot mode sample - samples: add smix_dao sample. - samples: add ecat_io sample. - samples: cherryusb: add one host and one device dual port sample - samples: add pwm/hrpwm fault mode - samples: lwip: add lwip_iperf_multi_ports - samples: drivers: tsw: add a tsn_switch sample - cmake: add symbol HPM_BUILD_TYPE to specify build type - docs: add generated cmake_intro.rst - docs: getting started: add zcc support related information Signed-off-by: Ryan QIAN <[email protected]>
- Loading branch information
