LaneATT

This repository holds the source code for LaneATT, a novel state-of-the-art lane detection model proposed in the paper "Keep your Eyes on the Lane: Real-time Attention-guided Lane Detection", by Lucas Tabelini, Rodrigo Berriel, Thiago M. Paixão, Claudine Badue, Alberto F. De Souza, and Thiago Oliveira-Santos.

News (2021-03-01): Our paper presenting LaneATT has been accepted to CVPR'21.

Table of contents

1. Prerequisites
2. Install
3. Getting started
4. Results
5. Code structure
6. Citation

1. Prerequisites

• Python >= 3.5
• PyTorch == 1.6, tested on CUDA 10.2. The models were trained and evaluated on PyTorch 1.6. When testing with other versions, the results (metrics) are slightly different.
• CUDA, to compile the NMS code
• Other dependencies described in requirements.txt

The versions described here were the lowest the code was tested with. Therefore, it may also work in other earlier versions, but it is not guaranteed (e.g., the code might run, but with different outputs).

2. Install

Conda is not necessary for the installation, as you can see, I only use it for PyTorch and Torchvision. Nevertheless, the installation process here is described using it.

conda create -n laneatt python=3.8 -y
conda activate laneatt
conda install pytorch==1.6 torchvision -c pytorch
pip install -r requirements.txt
cd lib/nms; python setup.py install; cd -

3. Getting started

Datasets

For a guide on how to download and setup each dataset, see DATASETS.md.

Training & testing

Train a model:

python main.py train --exp_name example --cfg example.yml

For example, to train LaneATT with the ResNet-34 backbone on TuSimple, run:

python main.py train --exp_name laneatt_r34_tusimple --cfg cfgs/laneatt_tusimple_resnet34.yml

After running this command, a directory experiments should be created (if it does not already exists). Another directory laneatt_r34_tusimple will be inside it, containing data related to that experiment (e.g., model checkpoints, logs, evaluation results, etc)

Evaluate a model:

python main.py test --exp_name example

This command will evaluate the model saved in the last checkpoint of the experiment example (inside experiments). If you want to evaluate another checkpoint, the --epoch flag can be used. For other flags, please see python main.py -h. To visualize the predictions, run the above command with the additional flag --view all.

Reproducing a result from the paper

0. Set up the dataset you want to reproduce the results on (as described in DATASETS.md).
1. Download the zip containing all pretrained models and then unzip it at the code's root:

gdown "https://drive.google.com/uc?id=1R638ou1AMncTCRvrkQY6I-11CPwZy23T" # main experiments on TuSimple, CULane and LLAMAS (1.3 GB)
unzip laneatt_experiments.zip

2. Run the evaluation (inference + metric computation):

python main.py test --exp_name $EXP_NAME

Replace $EXP_NAME with the name of a directory inside experiments/. For instance, if you want to reproduce the results using the ResNet-34 backbone on the TuSimple dataset, run:

python main.py test --exp_name laneatt_r34_tusimple

The results on TuSimple and LLAMAS should match exactly the ones reported in the paper. The results on CULane will deviate in the order of 0.1% (as shown in the CULane table below), since the metric reported on the paper was computed with the official code (C++), while this script will compute it using our implementation (which is much faster and in Python). The official metric implementation is available here.

4. Results

CULane

Backbone	F1, official impl. (%)	F1, our impl. (%)	FPS
ResNet-18	75.13	75.08	250
ResNet-34	76.68	76.66	171
ResNet-122	77.02	77.02	26

"F1, official impl." refers to the official CULane metric implementation in C++. "F1, our impl" refers to our implementation of the metric in Python. The results reported in the paper were computed using the official metric implementation (requires OpenCV 2.4).

TuSimple

Backbone	Accuracy (%)	FDR (%)	FNR (%)	F1 (%)	FPS
ResNet-18	95.57	3.56	3.01	96.71	250
ResNet-34	95.63	3.53	2.92	96.77	171
ResNet-122	96.10	4.64	2.17	96.06	26

Since the TuSimple dataset is not sequential, no qualitative video is available.

LLAMAS

Backbone	F1 (%)	Precision (%)	Recall (%)	FPS
ResNet-18	93.46	96.92	90.24	250
ResNet-34	93.74	96.79	90.88	171
ResNet-122	93.54	96.82	90.47	26

Additional results can be seen in the paper.

5. Code structure

• cfgs: Default configuration files
• figures: Images used in this repository
• lib
  • datasets
    • culane.py: CULane annotation loader
    • lane_dataset.py: Transforms raw annotations from a LaneDatasetLoader into a format usable by the model
    • lane_dataset_loader.py: Abstract class that each dataset loader implements
    • llamas.py: LLAMAS annotation loader
    • nolabel_dataset.py: Used on data with no annotation available (or quick qualitative testing)
    • tusimple.py: TuSimple annotation loader
  • models:
    • laneatt.py: LaneATT implementation
    • matching.py: Utility function for ground-truth and proposals matching
    • resnet.py: Implementation of ResNet
  • nms: NMS implementation
  • config.py: Configuration loader
  • experiment.py: Tracks and stores information about each experiment
  • focal_loss.py: Implementation of Focal Loss
  • lane.py: Lane representation
  • runner.py: Training and testing loops
• utils:
  • culane_metric.py: Unofficial implementation of the CULane metric. This implementation is faster than the oficial, however, it does not matches exactly the results of the official one (error in the order of 1e-4). Thus, it was used only during the model's development. For the results reported in the paper, the official one was used.
  • gen_anchor_mask.py: Computes the frequency of each anchor in a dataset to be used in the anchor filtering step
  • gen_video.py: Generates a video from a model's predictions
  • llamas_metric.py: Official implementation of the LLAMAS metric
  • llamas_utils.py: Utilities functions for the LLAMAS dataset
  • speed.py: Measure efficiency-related metrics of a model
  • tusimple_metric.py: Official implementation of the TuSimple metric
  • viz_dataset.py: Show images sampled from a dataset (post-augmentation)
• main.py: Runs the training or testing phase of an experiment

6. Citation

If you use this code in your research, please cite:

@InProceedings{tabelini2021cvpr,
  author    = {Lucas Tabelini
               and Rodrigo Berriel
               and Thiago M. Paix\~ao
               and Claudine Badue
               and Alberto Ferreira De Souza
               and Thiago Oliveira-Santos},
  title     = {{Keep your Eyes on the Lane: Real-time Attention-guided Lane Detection}},
  booktitle = {Conference on Computer Vision and Pattern Recognition (CVPR)},
  year      = {2021}
}