Capybara::Screenshot::Diff

Ever wondered what your project looked like two years ago? To answer that, you start taking screen shots during your tests. Capybara provides the save_screenshot method for this. Very good.

Ever introduced a graphical change unintended? Never want it to happen again? Then this gem is for you! Use this gem to detect changes in your pages by taking screen shots and comparing them to the previous revision.

Features

Screenshot Capturing: Easily capture screenshots at any point in your tests to track the visual state of your application.
Visual Change Detection: Automatically detect changes in screenshots taken across test runs to identify unintended visual modifications.
RSpec & Minitest Integration: Utilize additional assertions and allow to run comparison after test body completed.

Installation

Add these lines to your application's Gemfile:

gem 'capybara-screenshot-diff'
gem 'oily_png', platform: :ruby

And then execute:

$ bundle

Or install it yourself as:

$ gem install capybara-screenshot-diff

Requirements

capybara-screenshot-diff supports the currently supported versions of Ruby and Rails:

Ruby 3.0+ (https://www.ruby-lang.org/en/downloads/branches/)
Rails 6.1+ (https://guides.rubyonrails.org/maintenance_policy.html)
[for :vips driver] libvips 8.9 or later, see the libvips install instructions

Usage

Including DSL

To use the screenshot capturing and change detection features in your tests, include the CapybaraScreenshotDiff::DSL in your test classes. It provides the screenshot method to capture and compare screenshots.

There are different modules for different testing frameworks integrations.

Minitest

For Minitest, need to require capybara_screenshot_diff/minitest. In your test class, include the CapybaraScreenshotDiff::Minitest::Assertions module:

require 'capybara_screenshot_diff/minitest'

class ApplicationSystemTestCase < ActionDispatch::SystemTestCase
  # Make the Capybara & Capybara Screenshot Diff DSLs available in tests
  include CapybaraScreenshotDiff::DSL
  # Make `assert_*` methods behave like Minitest assertions
  include CapybaraScreenshotDiff::Minitest::Assertions
  
  def test_my_feature
    visit '/'
    assert_matches_screenshot 'index'
  end
end

RSpec

To use the screenshot capturing and change detection features in your tests, include the CapybaraScreenshotDiff::DSL in your test classes. It adds match_screenshot matcher to RSpec.

Important: The CapybaraScreenshotDiff::DSL is automatically included in all feature and system tests by default.

require 'capybara_screenshot_diff/rspec' 

describe 'Permissions admin', type: :feature do
  it 'works with permissions' do
    visit('/')
    expect(page).to match_screenshot('home_page')
  end
end


describe 'Permissions admin', type: :non_feature do
  include CapybaraScreenshotDiff::DSL
  
  it 'works with permissions' do
    visit('/')
    expect(page).to match_screenshot('home_page')
  end
end

Cucumber

Load Cucumber support by adding the following line (typically to your features/support/env.rb file):

require 'capybara_screenshot_diff/cucumber'

And in the steps you can use:

Then('I should not see any visual difference') do
  screenshot 'homepage'
end

Taking screenshots

Add screenshot '<my_feature>' to your tests. The screenshot will be saved in the doc/screenshots directory.

Change your existing save_screenshot calls to screenshot

test 'my useful feature' do
  visit '/'
  screenshot 'welcome_index'
  click_button 'Useful feature'
  screenshot 'feature_index'
  click_button 'Perform action'
  screenshot 'action_performed'
end

This will produce a sequence of images like this

doc
  screenshots
    action_performed
    feature_index
    welcome_index

To store the screen shot history, add the doc/screenshots directory to your version control system (git, svn, etc).

Screen shots are compared to the previously COMMITTED version of the same screen shot.

Screenshot groups

Commonly it is useful to group screenshots around a feature, and record them as a sequence. To do this, add a screenshot_group call to the start of your test.

test 'my useful feature' do
  screenshot_group 'useful_feature'
  visit '/'
  screenshot 'welcome_index'
  click_button 'Useful feature'
  screenshot 'feature_index'
  click_button 'Perform action'
  screenshot 'action_performed'
end

This will produce a sequence of images like this

doc
  screenshots
    useful_feature
      00-welcome_index
      01-feature_index
      02-action_performed

All files in the screenshot group directory will be deleted when screenshot_group is called.

Screenshot sections

You can introduce another level above the screenshot group called a screenshot_section. The section name is inserted just before the group name in the save path. If called in the setup of the test, all screenshots in that test will get the same prefix:

setup do
  screenshot_section 'my_feature'
end

test 'my subfeature' do
  screenshot_group 'subfeature'
  visit '/feature'
  click_button 'Interesting button'
  screenshot 'subfeature_index'
  click_button 'Perform action'
  screenshot 'action_performed'
end

This will produce a sequence of images like this

doc
  screenshots
    my_feature
      subfeature
        00-subfeature_index
        01-action_performed

Setting `screenshot_section` and/or `screenshot_group` for all tests

Setting the screenshot_section and/or screenshot_group for all tests can be done in the super class setup:

class ApplicationSystemTestCase < ActionDispatch::SystemTestCase
  setup do
    screenshot_section class_name.underscore.sub(/(_feature|_system)?_test$/, '')
    screenshot_group name[5..-1]
  end
end

screenshot_section and/or screenshot_group can still be overridden in each test.

Capturing one area instead of the whole page

You can crop images before comparison to be run, by providing region to crop as [left, top, right, bottom] or by css selector like body .tag

test 'the cool' do
  visit '/feature'
  screenshot 'cool_element', crop: '#my_element'
end

Note: When using a retina device screenshots dimensions might be off. If you are using (headless) chrome you can prevent this by setting the force-device-scale-factor argument to 1.

For Rails system specs using selenium you can do so for example by using the following snippet:

driven_by :selenium, using: :chrome_headless do |options|
  options.args << '--force-device-scale-factor=1'
end

Multiple Capybara drivers

Often it is useful to test your app using different browsers. To avoid the screenshots for different Capybara drivers to overwrite each other, set

Capybara::Screenshot.add_driver_path = true

The example above will then save your screenshots like this (for poltergeist and selenium):

doc
  screenshots
    poltergeist
      useful_feature
        00-welcome_index
        01-feature_index
        02-action_performed
    selenium
      useful_feature
        00-welcome_index
        01-feature_index
        02-action_performed

Multiple OSs

If you run your tests on multiple operating systems, you will most likely find the screen shots differ. To avoid the screenshots for different OSs to overwrite each other, set

Capybara::Screenshot.add_os_path = true

The example above will then save your screenshots like this (for Linux and Windows):

doc
  screenshots
    linux
      useful_feature
        00-welcome_index
        01-feature_index
        02-action_performed
    windows
      useful_feature
        00-welcome_index
        01-feature_index
        02-action_performed

If you combine this config with the add_driver_path config, the driver will be put in front of the OS name.

Screen size

You can specify the desired screen size using

Capybara::Screenshot.window_size = [1024, 768]

This will force the screen shots to the given size, and skip taking screen shots unless the desired window size can be achieved.

Disabling screen shots

If you want to skip taking screen shots, set

Capybara::Screenshot.enabled = false

You can of course set this by an environment variable

Capybara::Screenshot.enabled = ENV['TAKE_SCREENSHOTS']

Disabling diff

If you want to skip the assertion for change in the screen shot, set

Capybara::Screenshot::Diff.enabled = false

Using an environment variable

Capybara::Screenshot::Diff.enabled = ENV['COMPARE_SCREENSHOTS']

Tolerate screenshot differences

To allow screenshot differences, but still fail on functional errors, you can set the following option:

Capybara::Screenshot::Diff.fail_on_difference = false

It defaults to true. This can be useful in continuous integration to a generate a screenshot difference report while still reporting functional errors.

Does not tolerate new screenshots

To fail the test if a new screenshot is taken, set the following option:

Capybara::Screenshot::Diff.fail_if_new = true

If fail_if_new is set to true, the test will fail if a new screenshot is taken that does not have a corresponding previous image to compare against. This can be useful in situations where you want to ensure that every screenshot taken by your tests corresponds to an expected state of your application.

Screen shot save path

By default, Capybara::Screenshot::Diff saves screenshots to a doc/screenshots folder, relative to either Rails.root (if you're in Rails), or your current directory otherwise.

If you want to change where screenshots are saved to, then there are two configuration options that that are relevant.

The most likely one you'll want to modify is ...

Capybara::Screenshot.save_path = "other/path"

The save_path option is relative to Capybara::Screenshot.root.

Capybara::Screenshot.root defaults to either Rails.root (if you're in Rails) or your current directory. You can change it to something entirely different if necessary, such as when using an alternative web framework.

Capybara::Screenshot.root = Hanami.root

Screen shot stability

To ensure that animations are finished before saving a screen shot, you can add a stability time limit. If the stability time limit is set, a second screen shot will be taken and compared to the first. This is repeated until two subsequent screen shots are identical.

Capybara::Screenshot.stability_time_limit = 0.1

This can be overridden on a single screenshot:

test 'stability_time_limit' do
  visit '/'
  screenshot 'index', stability_time_limit: 0.5
end

Maximum wait limit

When the stability_time_limit is set, but no stable screenshot can be taken, a timeout occurs. The timeout occurs after Capybara.default_max_wait_time, but can be overridden by an option.

test 'max wait time' do
  visit '/'
  screenshot 'index', wait: 20.seconds
end

Hiding the caret for active input elements

In Chrome the screenshot includes the blinking input cursor. This can make it impossible to get a stable screenshot. To get around this you can set the hide caret option:

Capybara::Screenshot.hide_caret = true

This will make the cursor (caret) transparent (invisible), so the blinking does not delay the screen shot.

Removing focus from the active element

Another way to avoid the cursor blinking is to set the blur_active_element option:

Capybara::Screenshot.blur_active_element = true

This will remove the focus from the active element, removing the blinking cursor.

Allowed color distance

Sometimes you want to allow small differences in the images. For example, Chrome renders the same page slightly differently sometimes. You can set set the color difference threshold for the comparison using the color_distance_limit option to the screenshot method:

test 'color threshold' do
  visit '/'
  screenshot 'index', color_distance_limit: 30
end

The difference is calculated as the eucledian distance. You can also set this globally:

Capybara::Screenshot::Diff.color_distance_limit = 42

Allowed shift distance

Sometimes you want to allow small movements in the images. For example, jquer-tablesorter renders the same table slightly differently sometimes. You can set set the shift distance threshold for the comparison using the shift_distance_limit option to the screenshot method:

test 'color threshold' do
  visit '/'
  screenshot 'index', shift_distance_limit: 2
end

The difference is calculated as maximum distance in either the X or the Y axis. You can also set this globally:

Capybara::Screenshot::Diff.shift_distance_limit = 1

Note: For each increase in shift_distance_limit more pixels are searched for a matching color value, and this will impact performance severely if a match cannot be found.

If shift_distance_limit is nil shift distance is not measured. If shift_distance_limit is set, even to 0, shift distance is measured and reported on image differences.

Allowed difference size

You can set set a threshold for the differing area size for the comparison using the area_size_limit option to the screenshot method:

test 'area threshold' do
  visit '/'
  screenshot 'index', area_size_limit: 17
end

The difference is calculated as width * height. You can also set this globally:

Capybara::Screenshot::Diff.area_size_limit = 42

Skipping an area

Sometimes you have expected change that you want to ignore. You can use the skip_area option with [left, top, right, bottom] or css selector like '#footer' or '.container .skipped_element' to the screenshot method to ignore an area. Be aware that if the selector is not in the page then the library will wait the default wait time for it to appear. Therefore, it is best to only use css selectors for skip_areas you know will be in the page:

test 'unstable area' do
  visit '/'
  screenshot 'index', skip_area: [[17, 6, 27, 16], '.container .skipped_element', '#footer']
end

The arguments are [left, top, right, bottom] for the area you want to ignore. You can also set this globally:

Capybara::Screenshot::Diff.skip_area = [0, 0, 64, 48]

If you need to ignore multiple areas:

screenshot 'index', skip_area: [[0, 0, 64, 48], [17, 6, 27, 16], 'css_selector .element']

Available Image Processing Drivers

There are several image processing supported by this gem. There are several options to setup active driver: :auto, :chunky_png and :vips.

:auto - will try to load :vips if there is gem ruby-vips, in other cases will load :chunky_png
:chunky_png and :vips will load correspondent driver

Enable VIPS image processing

Vips driver provides a faster comparison, and could be enabled by adding ruby-vips to Gemfile.

If need to setup explicitly Vips driver, there are several ways to do this:

Globally: Capybara::Screenshot::Diff.driver = :vips
Per screenshot option: screenshot 'index', driver: :vips

With enabled VIPS there are new alternatives to process differences, which easier to find and support. For example, shift_distance_limit is very heavy operation. Instead better to use median_filter_window_size.

Tolerance level (vips only)

You can set a “tolerance” anywhere from 0% to 100%. This is the amount of change that's allowable. If the screenshot has changed by more than that amount, it'll flag it as a failure.

This is alternative to "Allowed difference size", only the difference that area calculates including valid pixels. But "tolerance" compares only different pixels.

You can use the tolerance option to the screenshot method to set level:

test 'unstable area' do
  visit '/'
  screenshot 'index', tolerance: 0.3
end

You can also set this globally:

Capybara::Screenshot::Diff.tolerance = 0.3

Median filter size (vips only)

This is an alternative to "Allowed shift distance", but much faster. You can find more about this strategy on Median Filter. Think about this like smoothing of the image, before comparison.

You can use the median_filter_window_size option to the screenshot method to set level:

test 'unstable area' do
  visit '/'
  screenshot 'index', median_filter_window_size: 2
end

Skipping stack frames in the error output

If you would like to override the screenshot method or for some other reason would like to skip stack frames when reporting image differences, you can use the skip_stack_frames option:

test 'test visiting the index' do
  visit root_path
  screenshot :index
end

private

def screenshot(name, **options)
  super(name, skip_stack_frames: 1, **options)
end

Screenshot Format

You can specify the format of the screenshots taken by setting the screenshot_format option. By default, the format is set to "png". However, you can change this to any format supported by your image processing driver. For example, to set the format to "webp", you can do the following:

Capybara::Screenshot.screenshot_format = "webp"

Customize Capybara#screenshot options

Allow to bypass screenshot options to Capybara driver.

# To create full page screenshots for Selenium
Capybara::Screenshot.capybara_screenshot_options[:full_page] = true

screenshot('index', median_filter_window_size: 2, capybara_screenshot_options: {full_page: false})

Development

After checking out the repo, run bin/setup to install dependencies. Then, run rake test to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

To install this gem onto your local machine, run bundle exec rake install.

To release a new version, update the version number in lib/capybara/screenshot/diff/version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and tags, and push the .gem file to rubygems.org.

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/donv/capybara-screenshot-diff. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the Contributor Covenant code of conduct.

License

The gem is available as open source under the terms of the MIT License.

Name		Name	Last commit message	Last commit date
Latest commit History 357 Commits
.github		.github
bin		bin
gemfiles		gemfiles
lib		lib
scripts/benchmark		scripts/benchmark
test		test
tmp		tmp
.gitattributes		.gitattributes
.gitignore		.gitignore
.standard.yml		.standard.yml
.yamllint.yml		.yamllint.yml
CONTRIBUTING.md		CONTRIBUTING.md
Dockerfile		Dockerfile
LICENSE.txt		LICENSE.txt
README.md		README.md
Rakefile		Rakefile
capybara-screenshot-diff.gemspec		capybara-screenshot-diff.gemspec
gems.rb		gems.rb

License

snap-diff/snap_diff-capybara

Folders and files

Latest commit

History

Repository files navigation

Capybara::Screenshot::Diff

Features

Installation

Requirements

Usage

Including DSL

Minitest

RSpec

Cucumber

Taking screenshots

Screenshot groups

Screenshot sections

Setting screenshot_section and/or screenshot_group for all tests

Capturing one area instead of the whole page

Multiple Capybara drivers

Multiple OSs

Screen size

Disabling screen shots

Disabling diff

Tolerate screenshot differences

Does not tolerate new screenshots

Screen shot save path

Screen shot stability

Maximum wait limit

Hiding the caret for active input elements

Removing focus from the active element

Allowed color distance

Allowed shift distance

Allowed difference size

Skipping an area

Available Image Processing Drivers

Enable VIPS image processing

Tolerance level (vips only)

Median filter size (vips only)

Skipping stack frames in the error output

Screenshot Format

Customize Capybara#screenshot options

Development

Contributing

License

About

Resources

License

Stars

Watchers

Forks

Releases 1

Packages 0

Contributors 12

Languages

Setting `screenshot_section` and/or `screenshot_group` for all tests

Packages